On Wed, Oct 23, 2013 at 2:33 PM, Tobias Reinicke <[email protected]> wrote:
> Right - gotcha.
>
> So I put this in and it worked:
> curl -v -u admin:geoserver -XPUT -H "Content-type: text/plain" -d
> "file:/data/mosaic" "
> http://localhost:8080/geoserver/rest/workspaces/toby/coveragestores/S2Output/external.imagemosaic
> "
>
> I now have a layer called 'mosiac' which is in a store called S2Output.
> All good.
> Three things;
> 1. Note the "file:/" - rather than "file://".. (linux thing I presume)
>
Probably file:/ works too but ...
http://en.wikipedia.org/wiki/File_URI_scheme :)
> 2. I presume I can't specify a different layer name to be created rather
> than it take the name of the folder I specify?
>
Not sure about this. I should investigate or maybe someone else may provide
additional feedback on that.
> 3. If I were now to add new images from a different folder - do those
> images just get referenced, or copied into the folder of that image mosaic.
>
Do you refer to harvest (=adding more files to an existing mosaic)? In that
case, using the external.imagemosaic format, they should be simply get
referenced .
Cheers,
Daniele
> Thanks Daniele - helpful as ever!
>
> Toby
> (At Magellium Ltd now :) )
>
>
>
> On 23 October 2013 13:21, Daniele Romagnoli <
> [email protected]> wrote:
>
>>
>>
>> ==
>> Our support, Your Success! Visit http://opensdi.geo-solutions.it for
>> more information.
>> ==
>> Ing. Daniele Romagnoli
>> Senior Software Engineer
>>
>> GeoSolutions S.A.S.
>> Via Poggio alle Viti 1187
>> 55054 Massarosa (LU)
>> Italy
>> phone: +39 0584 962313
>> fax: +39 0584 1660272
>>
>> http://www.geo-solutions.it
>> http://twitter.com/geosolutions_it
>>
>> -------------------------------------------------------
>>
>>
>> On Wed, Oct 23, 2013 at 2:12 PM, Tobias Reinicke <[email protected]>wrote:
>>
>>> Hey,
>>>
>>> Tried that - but my data is not on "C:/data/mosaic, so I have replaced
>>> it with just /data/mosaic,
>>>
>> Mine was only the example I have run on my system to provide you a hint :)
>>
>>
>>> and I get an error:
>>>
>>> * About to connect() to localhost port 8080 (#0)
>>> * Trying 127.0.0.1... connected
>>> * Server auth using Basic with user 'admin'
>>> > PUT
>>> /geoserver/rest/workspaces/toby/coveragestores/poly-incremental/external.imagemosaic
>>> HTTP/1.1
>>> > Authorization: Basic YWRtaW46Z2Vvc2VydmVy
>>> > User-Agent: curl/7.22.0 (i686-pc-linux-gnu) libcurl/7.22.0
>>> OpenSSL/1.0.1 zlib/1.2.3.4 libidn/1.23 librtmp/2.3
>>> > Host: localhost:8080
>>> > Accept: */*
>>> > Content-type: text/plain
>>> > Content-Length: 12
>>> >
>>> * upload completely sent off: 12out of 12 bytes
>>> < HTTP/1.1 500 Internal Server Error
>>> < Server: Apache-Coyote/1.1
>>> < Content-Type: text/plain
>>> < Transfer-Encoding: chunked
>>> < Date: Wed, 23 Oct 2013 12:11:08 GMT
>>> < Connection: close
>>> <
>>> * Closing connection #0
>>> Error while storing uploaded file::no protocol: /data/mosaic
>>>
>>
>> I think you have removed also the "file://" prefix to specify the
>> protocol.
>> Make sure to keep it on the request
>>
>> curl -v -u admin:geoserver -XPUT -H "Content-type: text/plain" -d *
>> "file://*/data/mosaic" "
>> http://localhost:8080/geoserver/rest/workspaces/toby/coveragestores/YOURSTORENAME/external.imagemosaic
>> "
>>
>>
>>>
>>> Also - what is the "poly-incremental" thing?
>>>
>> It's the name of a coverage store which has been assigned to that data in
>> the CURL example provided in the Documentation.
>> You just need to specify a storename you like so that the REST request
>> will configure a coverage store with that name.
>> As an instance: "mymosaic"
>>
>> Cheers,
>> Daniele
>>
>>
>>>
>>> Thanks
>>> Toby
>>>
>>>
>>>
>>> On 23 October 2013 13:04, Daniele Romagnoli <
>>> [email protected]> wrote:
>>>
>>>> Hi again,
>>>> If you want to create a new mosaic store, you should use a PUT like
>>>> this:
>>>>
>>>> curl -v -u admin:geoserver -XPUT -H "Content-type: text/plain" -d
>>>> "file://c:/data/mosaic" "
>>>> http://localhost:8080/geoserver/rest/workspaces/toby/coveragestores/poly-incremental/external.imagemosaic
>>>> "
>>>>
>>>> Once done, you can afterwards add additional files to your store
>>>> through additional POSTs.
>>>>
>>>> curl -v -u admin:geoserver -XPOST -H "Content-type: text/plain" -d
>>>> "*file://c:/data/morefiles/sample12.tif*"
>>>> "http://localhost:8080/geoserver/rest/workspaces/toby/coveragestores/poly-incremental/external.imagemosaic";
>>>>
>>>> curl -v -u admin:geoserver -XPOST -H "Content-type: text/plain" -d
>>>> "*file://c:/data/morefiles/sample13.tif*"
>>>> "http://localhost:8080/geoserver/rest/workspaces/toby/coveragestores/poly-incremental/external.imagemosaic";
>>>>
>>>> OR just add lot of files once by harvesting a whole folder:
>>>>
>>>> curl -v -u admin:geoserver -XPOST -H "Content-type: text/plain" -d
>>>> "*file://c:/data/evenmorefiles/*"
>>>> "http://localhost:8080/geoserver/rest/workspaces/toby/coveragestores/poly-incremental/external.imagemosaic";
>>>>
>>>>
>>>> Please, let us know if you still have issues.
>>>> Hope this helps,
>>>> Daniele
>>>>
>>>>
>>>> ==
>>>> Our support, Your Success! Visit http://opensdi.geo-solutions.it for
>>>> more information.
>>>> ==
>>>> Ing. Daniele Romagnoli
>>>> Senior Software Engineer
>>>>
>>>> GeoSolutions S.A.S.
>>>> Via Poggio alle Viti 1187
>>>> 55054 Massarosa (LU)
>>>> Italy
>>>> phone: +39 0584 962313
>>>> fax: +39 0584 1660272
>>>>
>>>> http://www.geo-solutions.it
>>>> http://twitter.com/geosolutions_it
>>>>
>>>> -------------------------------------------------------
>>>>
>>>>
>>>> On Wed, Oct 23, 2013 at 1:07 PM, Tobias Reinicke <[email protected]>wrote:
>>>>
>>>>> Hi Daniele,
>>>>>
>>>>> The contents is just a list of geotiff files, so image1.tiff,
>>>>> image2.tiff . I have about 10 in there.
>>>>>
>>>>> Re post / put - I was just following the documentation [1]. :)
>>>>>
>>>>> Toby
>>>>>
>>>>>
>>>>> [1] http://docs.geoserver.org/stable/en/user/rest/examples/curl.html
>>>>>
>>>>>
>>>>> On 23 October 2013 11:56, Daniele Romagnoli <
>>>>> [email protected]> wrote:
>>>>>
>>>>>> Hi Tobias,
>>>>>> can you please list the content of your /data/mosaic folder?
>>>>>> Also note that you should use a PUT to create a coveragestore instead
>>>>>> of POST.
>>>>>>
>>>>>> Please, let us know.
>>>>>> Cheers,
>>>>>> Daniele
>>>>>>
>>>>>>
>>>>>>
>>>>>> ==
>>>>>> Our support, Your Success! Visit http://opensdi.geo-solutions.it for
>>>>>> more information.
>>>>>> ==
>>>>>> Ing. Daniele Romagnoli
>>>>>> Senior Software Engineer
>>>>>>
>>>>>> GeoSolutions S.A.S.
>>>>>> Via Poggio alle Viti 1187
>>>>>> 55054 Massarosa (LU)
>>>>>> Italy
>>>>>> phone: +39 0584 962313
>>>>>> fax: +39 0584 1660272
>>>>>>
>>>>>> http://www.geo-solutions.it
>>>>>> http://twitter.com/geosolutions_it
>>>>>>
>>>>>> -------------------------------------------------------
>>>>>>
>>>>>>
>>>>>> On Wed, Oct 23, 2013 at 12:28 PM, Tobias Reinicke <[email protected]
>>>>>> > wrote:
>>>>>>
>>>>>>> <<Sorry for repost - have subscribed now>>
>>>>>>>
>>>>>>>
>>>>>>> Hello All,
>>>>>>>
>>>>>>> So I'm playing with the rest interface - and have managed to create
>>>>>>> a workspace and add a single tiff image layer by doing this:
>>>>>>>
>>>>>>> //create workspace
>>>>>>> curl -v -u admin:geoserver -XPOST -H "Content-type: text/xml" -d
>>>>>>> "<workspace><name>toby</name></workspace>"
>>>>>>> http://localhost:8080/geoserver/rest/workspaces
>>>>>>>
>>>>>>> //create single image layer
>>>>>>> curl -u admin:geoserver -XPUT -H "Content-type:image/tiff"
>>>>>>> --data-binary @/data/ndvi_color1.tif
>>>>>>> http://localhost:8080/geoserver/rest/workspaces/toby/coveragestores/ndvi_color1.tif/file.geotiff
>>>>>>>
>>>>>>> My data is local to the geoserver (ubuntu) in /data directory.
>>>>>>>
>>>>>>> Now I have multiple images in /data/mosaic that I want to add to a
>>>>>>> mosaic layer..
>>>>>>> I've been trying something like
>>>>>>> curl -v -u admin:geoserver -XPOST -H "Content-type: text/plain" -d
>>>>>>> "/data/mosaic" "
>>>>>>> http://localhost:8080/geoserver/rest/workspaces/toby/coveragestores/poly-incremental/external.imagemosaic
>>>>>>> "
>>>>>>>
>>>>>>> But that doesn't work - I get a 405 Method not allowed error.
>>>>>>>
>>>>>>> I've been reading on the web and they say something about uploading
>>>>>>> the index.shp file in order to be able to do this - is that true? If so
>>>>>>> how
>>>>>>> do I create that in the first place?
>>>>>>>
>>>>>>>
>>>>>>> Any help would be appreciated.
>>>>>>>
>>>>>>> Thanks
>>>>>>> Toby
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> October Webinars: Code for Performance
>>>>>>> Free Intel webinars can help you accelerate application performance.
>>>>>>> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the
>>>>>>> most from
>>>>>>> the latest Intel processors and coprocessors. See abstracts and
>>>>>>> register >
>>>>>>>
>>>>>>> http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
>>>>>>> _______________________________________________
>>>>>>> Geoserver-users mailing list
>>>>>>> [email protected]
>>>>>>> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
_______________________________________________
Geoserver-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/geoserver-users
