Hi Jonathan, Thanks for your response. In fact I had tried previously without entering anything in the BBOX and got the same "too close to pole" error. That was why I tried to enter -91 and 91 values in the BBOX in hope that it would fix the problem. This error only happened when I chose Grid set "EPSG: 4326" and the OSM data was imported using EPSG: 3857. I did not get the "too close to pole" error if I chose Girdset EPSG: 900913 which is basically the same as EPSG: 3857. Was it because GeoServer tried to re-project the data into EPSG: 4326 and got that error because some of the north-america OSM data is too close to pole? My question is do I have the use the Grid set that is compatible with with OSM data SRS?
Regards, Tam -- View this message in context: http://osgeo-org.1560.x6.nabble.com/GeoWebCache-seeding-tp5103935p5104748.html Sent from the GeoServer - User mailing list archive at Nabble.com. ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Geoserver-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/geoserver-users
