Hi,
one question, what data store is providing this data?
Cheers
Andrea
On Wed, Nov 12, 2014 at 2:46 PM, Rahkonen Jukka (Tike) <
[email protected]> wrote:
> Hi,
>
>
>
> Something makes me think that this is a bug and it has to do with sorting.
>
>
>
> Without SortBy the first features which are returned have fids 1, 10, 100,
> 1000, 1001, 101,
>
>
> https://extmap.sundsvall.se/geoserver/wfs?service=WFS&version=2.0.0&request=GetFeature&typeNames=SundsvallsKommun:DetaljplanGallande_yta&count=10&startindex=0
>
>
>
> When startindex is 1000 the first fid is .999 and when the resultset is
> ordered with this logic there are no higher fids than 999 in the data.
> Fid:1000 was already the 4th record.
>
>
>
> I do not know if this makes sense or not, just trying to figure what could
> make Geoserver to behave like I see it behaves.
>
>
>
> -Jukka-
>
>
>
>
>
>
>
>
>
> Rahkonen Jukka wrote:
>
>
>
> Corrent one with ”count” makes no difference
>
>
>
>
> https://extmap.sundsvall.se/geoserver/wfs?service=WFS&version=2.0.0&request=GetFeature&typeNames=SundsvallsKommun:DetaljplanGallande_yta&count=50&StartIndex=1000&sortby=URSPRUNG
>
>
>
> -Jukka-
>
>
>
> *Lähettäjä:* Rahkonen Jukka (Tike)
> *Lähetetty:* 12. marraskuuta 2014 15:28
> *Vastaanottaja:* 'sbkkae'
> *Kopio:* 'GeoServer Mailing List List'
> *Aihe:* Re: [Geoserver-users] Problems in paging WFS on Geoserver 2.5
>
>
>
> Hi,
>
>
>
> I hoped too that it would be so easy but it was not.
>
> Also typename -> typenames in WFS 2.0.0 but here with KVP Geoserver is
> flexible and both typename and typenames is accepted. Another thing that I
> am remembering is that paging is not reliable without sorting, if my memory
> serves me right. Then there should be SortBy with some unique field
> included but perhaps that is needed only if there are some filters involved
> as well.
>
>
>
> Anyway, this does not work either.
>
>
>
>
> https://extmap.sundsvall.se/geoserver/wfs?service=WFS&version=2.0.0&request=GetFeature&typeNames=SundsvallsKommun:DetaljplanGallande_yta&maxfeatures=50&StartIndex=1000&sortby=URSPRUNG
>
>
>
> I can also see that number of returned features is not correct, it shows
> always the total count
>
> numberMatched="1024" numberReturned="1024"
>
>
>
> -Jukka Rahkonen-
>
>
>
> Andrea Aime wrote:
>
>
>
>
>
> Hi,
>
> if memory serves me right, WFS 2.0 changed the name of the paging
> paramters compared to 1.1.0, they are now startIndex and count.
>
> Please search for the WFS 2.0 spec on the OGC site to confirm.
>
>
>
> Cheers
>
> Andrea
>
>
>
> On Wed, Nov 12, 2014 at 1:42 PM, sbkkae <[email protected]>
> wrote:
>
> Hi
> I've got a dataset set up as a layer, containing 1024 features.
> When calling WFS-service for the layer without paging all objects get
> returned:
>
> https://extmap.sundsvall.se/geoserver/wfs?service=WFS&version=2.0.0&request=GetFeature&typeName=SundsvallsKommun:DetaljplanGallande_yta&outputFormat=json
>
> When paging these features using WFS it returns only the 1000 first:
>
> https://extmap.sundsvall.se/geoserver/wfs?service=WFS&version=2.0.0&request=GetFeature&typeName=SundsvallsKommun:DetaljplanGallande_yta&outputFormat=json&maxFeatures=50&startIndex=1000
>
> Anyone who have had the same problem?
>
> Regards
> Anders Erlandsson
> Sundsvalls Kommun
> Sweden
>
>
>
> --
> View this message in context:
> http://osgeo-org.1560.x6.nabble.com/Problems-in-paging-WFS-on-Geoserver-2-5-tp5172562.html
> Sent from the GeoServer - User mailing list archive at Nabble.com.
>
>
> ------------------------------------------------------------------------------
> Comprehensive Server Monitoring with Site24x7.
> Monitor 10 servers for $9/Month.
> Get alerted through email, SMS, voice calls or mobile push notifications.
> Take corrective actions from your mobile device.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
> _______________________________________________
> Geoserver-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>
>
>
>
>
> --
>
> ==
>
> GeoServer Professional Services from the experts! Visit
>
> http://goo.gl/NWWaa2 for more information.
>
> ==
>
>
>
> Ing. Andrea Aime
>
> @geowolf
>
> Technical Lead
>
>
>
> GeoSolutions S.A.S.
>
> Via Poggio alle Viti 1187
>
> 55054 Massarosa (LU)
>
> Italy
>
> phone: +39 0584 962313
>
> fax: +39 0584 1660272
>
> mob: +39 339 8844549
>
>
>
> http://www.geo-solutions.it
>
> http://twitter.com/geosolutions_it
>
>
>
> *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
>
> Le informazioni contenute in questo messaggio di posta elettronica e/o
> nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
> loro utilizzo è consentito esclusivamente al destinatario del messaggio,
> per le finalità indicate nel messaggio stesso. Qualora riceviate questo
> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
> darcene notizia via e-mail e di procedere alla distruzione del messaggio
> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
> divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
> utilizzarlo per finalità diverse, costituisce comportamento contrario ai
> principi dettati dal D.Lgs. 196/2003.
>
>
>
> The information in this message and/or attachments, is intended solely for
> the attention and use of the named addressee(s) and may be confidential or
> proprietary in nature or covered by the provisions of privacy act
> (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
> Code).Any use not in accord with its purpose, any disclosure, reproduction,
> copying, distribution, or either dissemination, either whole or partial, is
> strictly forbidden except previous formal approval of the named
> addressee(s). If you are not the intended recipient, please contact
> immediately the sender by telephone, fax or e-mail and delete the
> information in this message that has been received in error. The sender
> does not give any warranty or accept liability as the content, accuracy or
> completeness of sent messages and accepts no responsibility for changes
> made after they were sent or for other risks which arise as a result of
> e-mail transmission, viruses, etc.
>
>
>
> -------------------------------------------------------
>
>
> ------------------------------------------------------------------------------
> Comprehensive Server Monitoring with Site24x7.
> Monitor 10 servers for $9/Month.
> Get alerted through email, SMS, voice calls or mobile push notifications.
> Take corrective actions from your mobile device.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
> _______________________________________________
> Geoserver-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>
>
--
==
GeoServer Professional Services from the experts! Visit
http://goo.gl/NWWaa2 for more information.
==
Ing. Andrea Aime
@geowolf
Technical Lead
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
mob: +39 339 8844549
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
*AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
Le informazioni contenute in questo messaggio di posta elettronica e/o
nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
loro utilizzo è consentito esclusivamente al destinatario del messaggio,
per le finalità indicate nel messaggio stesso. Qualora riceviate questo
messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
darcene notizia via e-mail e di procedere alla distruzione del messaggio
stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
utilizzarlo per finalità diverse, costituisce comportamento contrario ai
principi dettati dal D.Lgs. 196/2003.
The information in this message and/or attachments, is intended solely for
the attention and use of the named addressee(s) and may be confidential or
proprietary in nature or covered by the provisions of privacy act
(Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
Code).Any use not in accord with its purpose, any disclosure, reproduction,
copying, distribution, or either dissemination, either whole or partial, is
strictly forbidden except previous formal approval of the named
addressee(s). If you are not the intended recipient, please contact
immediately the sender by telephone, fax or e-mail and delete the
information in this message that has been received in error. The sender
does not give any warranty or accept liability as the content, accuracy or
completeness of sent messages and accepts no responsibility for changes
made after they were sent or for other risks which arise as a result of
e-mail transmission, viruses, etc.
-------------------------------------------------------
------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
_______________________________________________
Geoserver-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/geoserver-users
