Hi Giuseppe,
please, keep the mailing list CC-ed to all your replies so that other
people can eventually provide additional comments on the current topic.
Do you have any chance to share the full geoserver LOG (with logging set to
VERBOSE) and a sample ECW replicating the issue (in case the data you are
using can be shared)?
Best Regards,
Daniele
==
GeoServer Professional Services from the experts! Visit
http://goo.gl/NWWaa2 for more information.
==
Ing. Daniele Romagnoli
Senior Software Engineer
GeoSolutions S.A.S.
Via Poggio alle Viti 1187
55054 Massarosa (LU)
Italy
phone: +39 0584 962313
fax: +39 0584 1660272
http://www.geo-solutions.it
http://twitter.com/geosolutions_it
-------------------------------------------------------
*AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
Le informazioni contenute in questo messaggio di posta elettronica e/o
nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
loro utilizzo è consentito esclusivamente al destinatario del messaggio,
per le finalità indicate nel messaggio stesso. Qualora riceviate questo
messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
darcene notizia via e-mail e di procedere alla distruzione del messaggio
stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
utilizzarlo per finalità diverse, costituisce comportamento contrario ai
principi dettati dal D.Lgs. 196/2003.
The information in this message and/or attachments, is intended solely for
the attention and use of the named addressee(s) and may be confidential or
proprietary in nature or covered by the provisions of privacy act
(Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
Code).Any use not in accord with its purpose, any disclosure, reproduction,
copying, distribution, or either dissemination, either whole or partial, is
strictly forbidden except previous formal approval of the named
addressee(s). If you are not the intended recipient, please contact
immediately the sender by telephone, fax or e-mail and delete the
information in this message that has been received in error. The sender
does not give any warranty or accept liability as the content, accuracy or
completeness of sent messages and accepts no responsibility for changes
made after they were sent or for other risks which arise as a result of
e-mail transmission, viruses, etc.
On Fri, Jan 9, 2015 at 8:18 PM, Giuseppe Falcone <[email protected]
> wrote:
> Hi Daniele,
>
> thanks a lot for the response.
> I have tried to create a layer with a single ecw and it's working in
> geoserver preview.
> The layer created with the image mosaic plugin working if I doing a getMap
> request; don't working (blank images) from geoserver preview.
>
> Best regards.
>
> Giuseppe
>
> 2015-01-09 14:13 GMT+01:00 Daniele Romagnoli <
> [email protected]>:
>
>> Hi Giuseppe,
>> We didn't try with the latest ECW SDK yet.
>> Do you have any chance to setup an ECW CoverageStore (instead of the
>> ImageMosaic one) on top of a single ECW file and check it on the layer
>> preview?
>> This will allow us to understand if is it a problem at ImageMosaic side
>> or if the underlying reader which doesn't work, in order to isolate the
>> issue.
>>
>> Please, let us know.
>> Best Regards,
>> Daniele
>>
>>
>> ==
>> GeoServer Professional Services from the experts! Visit
>> http://goo.gl/NWWaa2 for more information.
>> ==
>>
>> Ing. Daniele Romagnoli
>> Senior Software Engineer
>>
>> GeoSolutions S.A.S.
>> Via Poggio alle Viti 1187
>> 55054 Massarosa (LU)
>> Italy
>> phone: +39 0584 962313
>> fax: +39 0584 1660272
>>
>> http://www.geo-solutions.it
>> http://twitter.com/geosolutions_it
>>
>> -------------------------------------------------------
>>
>> *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003*
>>
>> Le informazioni contenute in questo messaggio di posta elettronica e/o
>> nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
>> loro utilizzo è consentito esclusivamente al destinatario del messaggio,
>> per le finalità indicate nel messaggio stesso. Qualora riceviate questo
>> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
>> darcene notizia via e-mail e di procedere alla distruzione del messaggio
>> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
>> divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
>> utilizzarlo per finalità diverse, costituisce comportamento contrario ai
>> principi dettati dal D.Lgs. 196/2003.
>>
>>
>>
>> The information in this message and/or attachments, is intended solely
>> for the attention and use of the named addressee(s) and may be confidential
>> or proprietary in nature or covered by the provisions of privacy act
>> (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
>> Code).Any use not in accord with its purpose, any disclosure, reproduction,
>> copying, distribution, or either dissemination, either whole or partial, is
>> strictly forbidden except previous formal approval of the named
>> addressee(s). If you are not the intended recipient, please contact
>> immediately the sender by telephone, fax or e-mail and delete the
>> information in this message that has been received in error. The sender
>> does not give any warranty or accept liability as the content, accuracy or
>> completeness of sent messages and accepts no responsibility for changes
>> made after they were sent or for other risks which arise as a result of
>> e-mail transmission, viruses, etc.
>>
>>
>> On Fri, Jan 9, 2015 at 12:10 PM, Giuseppe Falcone <
>> [email protected]> wrote:
>>
>>> Hi all,
>>>
>>> add other information. I have installed native JAI but the behaviour is
>>> the same.
>>> This is the log on a getMap request:
>>>
>>> 2015-01-09 12:05:04,122 INFO [geoserver.wms] -
>>> Request: getMap
>>> Width = 1512
>>> Height = 603
>>> Palette = null
>>> Tiled = false
>>> SRS = EPSG:26592
>>> FeatureVersion = null
>>> Styles = [StyleImpl[ name=raster]]
>>> Layers = [org.geoserver.wms.MapLayerInfo@1cc92ed4]
>>> MaxFeatures = null
>>> Crs = PROJCS["Monte Mario (Rome) / Italy zone 2",
>>> GEOGCS["Monte Mario (Rome)",
>>> DATUM["Monte Mario (Rome)",
>>> SPHEROID["International 1924", 6378388.0, 297.0,
>>> AUTHORITY["EPSG","7022"]],
>>> AUTHORITY["EPSG","6806"]],
>>> PRIMEM["Rome", 12.452333333333332, AUTHORITY["EPSG","8906"]],
>>> UNIT["degree", 0.017453292519943295],
>>> AXIS["Geodetic longitude", EAST],
>>> AXIS["Geodetic latitude", NORTH],
>>> AUTHORITY["EPSG","4806"]],
>>> PROJECTION["Transverse_Mercator", AUTHORITY["EPSG","9807"]],
>>> PARAMETER["central_meridian", 15.0],
>>> PARAMETER["latitude_of_origin", 0.0],
>>> PARAMETER["scale_factor", 0.9996],
>>> PARAMETER["false_easting", 2520000.0],
>>> PARAMETER["false_northing", 0.0],
>>> UNIT["m", 1.0],
>>> AXIS["Easting", EAST],
>>> AXIS["Northing", NORTH],
>>> AUTHORITY["EPSG","26592"]]
>>> Bbox = SRSEnvelope[2456504.6459961 : 2463685.3540039, 4512498.1326294 :
>>> 4515361.8673706]
>>> RemoteOwsType = null
>>> RemoteOwsURL = null
>>> Env = {}
>>> FormatOptions = {}
>>> Angle = 0.0
>>> CQLFilter = null
>>> Elevation = []
>>> FeatureId = null
>>> StartIndex = null
>>> ViewParams = null
>>> BgColor = java.awt.Color[r=255,g=255,b=255]
>>> Transparent = true
>>> StyleFormat = sld
>>> SldBody = null
>>> ValidateSchema = false
>>> Sld = null
>>> StyleUrl = null
>>> TilesOrigin = null
>>> Exceptions = SE_XML
>>> StyleBody = null
>>> SldVersion = null
>>> StyleVersion = null
>>> Format = image/png
>>> Buffer = 0
>>> Time = []
>>> Filter = null
>>> Filters = null
>>> Get = true
>>> RawKvp = {TRANSPARENT=TRUE,
>>> BBOX=2456504.6459961,4512498.1326294,2463685.3540039,4515361.8673706,
>>> VERSION=1.1.1, FORMAT=image/png, SERVICE=WMS, HEIGHT=603,
>>> LAYERS=topp:Napoli, REQUEST=GetMap, STYLES=, SRS=EPSG:26592, WIDTH=1512}
>>> BaseUrl = http://192.168.11.16:8080/geoserver/
>>> RequestCharset = UTF-8
>>> Version = 1.1.1
>>> Request = GetMap
>>> 2015-01-09 12:05:04,123 DEBUG [wms.map] - Writing png image ...
>>> 2015-01-09 12:05:04,135 DEBUG [geotools.styling] - number of fts set 1
>>> 2015-01-09 12:05:04,247 DEBUG [wms.map] - Writing png image ... done!
>>> 2015-01-09 12:05:04,247 DEBUG [geoserver.filters] - Not compressing
>>> output for mimetype: image/png
>>> 2015-01-09 12:05:04,247 DEBUG
>>> [filter.GeoServerSecurityContextPersistenceFilter$1] -
>>> SecurityContextHolder now cleared, as request processing completed
>>>
>>>
>>> I noticed that in mosaic properties file missing envelope 2D params.
>>> It's normal? Anyone has some ideas?
>>>
>>> Thanks again.
>>>
>>> Giuseppe
>>>
>>>
>>>
>>> 2015-01-08 17:23 GMT+01:00 Giuseppe Falcone <[email protected]>
>>> :
>>>
>>>> Hi all,
>>>>
>>>> I have some problem with my geoserver installation.
>>>>
>>>> I have installed geoserver 2.6.1 on an Ubuntu server x64 14.04 LTS.
>>>> I have installed also gdal with ecw support from ECW SDK 5.1.
>>>>
>>>> I create an image mosaic from a folder with some ecw images.
>>>> Geoserver create the shapefile index and the properties file correctly,
>>>> but in the layer preview i see only blank images.
>>>>
>>>> I have tried to change some attributes (tile size, output format, wms
>>>> version, ...) but the result not change.
>>>>
>>>> I see that the properties file has attributes different from those on
>>>> geoserver documentation. This is my properties file:
>>>>
>>>> #-Automagically created from GeoTools-
>>>> #Thu Jan 08 15:49:51 CET 2015
>>>> Levels=0.5,0.5
>>>> Heterogeneous=false
>>>> AbsolutePath=false
>>>> Name=Napoli
>>>> TypeName=Napoli
>>>> Caching=false
>>>> ExpandToRGB=false
>>>> LocationAttribute=location
>>>> SuggestedSPI=it.geosolutions.imageio.plugins.ecw.ECWImageReaderSpi
>>>> CheckAuxiliaryMetadata=false
>>>> LevelsNum=1
>>>>
>>>>
>>>> Anyone has some ideas? Thanks a lot.
>>>>
>>>> Giuseppe
>>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Dive into the World of Parallel Programming! The Go Parallel Website,
>>> sponsored by Intel and developed in partnership with Slashdot Media, is
>>> your
>>> hub for all things parallel software development, from weekly thought
>>> leadership blogs to news, videos, case studies, tutorials and more. Take
>>> a
>>> look and join the conversation now. http://goparallel.sourceforge.net
>>> _______________________________________________
>>> Geoserver-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>>>
>>>
>>
>
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
vanity: www.gigenet.com
_______________________________________________
Geoserver-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/geoserver-users
