You can Transform the geotiff to a FeatureCollection using
RasterAsPointCollectionProcess and then use the AggregateProcess
Dominique Bessette
Software Engineer
General Dynamics Information Technology
Office: 619-881-2748
From: Victor.Sinceac [mailto:victor.sinc...@corobor.com]
Sent: Monday, February 27, 2017 10:03 AM
To: geoserver-users@lists.sourceforge.net
Subject: [Geoserver-users] GeoServer: how to get min/max values of a raster
band?
Hi,
Is there a simple method (i.e. without adding extra WPS functions) to get the
min/max values and/or the histogram of a given raster (e.g. geotiff) band, by
using the standard services of the GeoServer?
Mani Thanks,
Victor
_____
This message is subject to and does not create or vary any contractual
relationship between Campbell Scientific Limited, its subsidiaries or
affiliates ("CSL") and you. Internet communications are not secure and
therefore CSL does not accept legal responsibility for the contents of this
message. The message is intended for the addressee only and its contents and
any attached files are strictly confidential. If you have received it in error,
please telephone +44 (0)1509 601141 or email
postmas...@campbellsci.co.uk<mailto:postmas...@campbellsci.co.uk>. Thank you.
Campbell Scientific Ltd.
Company Registration Number: 1933935 (England and Wales) Registered Address:
Campbell Park, 80 Hathern Road, Shepshed, Loughborough, Leicestershire LE12
9GX, UK
Tel: +44 (0) 1509 601141
Fax: +44 (0) 1509 601091
Web: www.campbellsci.co.uk<http://www.campbellsci.co.uk>
_____
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Geoserver-users mailing list
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
