Hey,

in the layer list there is one with the name "fmis:Fertilization" from
the store "fmis_Fertilization". The layer name seem to remain from my
older configurations. As you said, I published the layer again. Now
there is a layer "fmis:Crop". Requesting this I got the exception:
"Joining queries are only supported on JDBC data stores". This seem to
be a complete different response and my first problem seem to be solved.
I will change my data source or change the mapping and hopefully do it.
Thanks a lot for supporting!!! 

KR
Markus

On Mon, 2017-07-24 at 09:03 +0100, Nuno Oliveira wrote:
> The filenames don't influential the layers names.
> The error you get (it seems to me) is that GeoServer is not finding the 
> fmis:Crop layer.
> When you got t GeoServer list layers, what names do you see ?
> When you got the app-schema store and lick on publish layer what do you see ?
> 
> On 07/20/2017 09:13 PM, Markus Jackenkroll wrote:
> > I did so and get:
> > <ows:ExceptionText>Feature type fmis:Crop unknown</ows:ExceptionText>
> >
> > I am not sure, but my directories and filenames are all named 
> > "fmis_Fertilization". Do I have to change that?
> >
> >
> >
> > Zitat von Nuno Oliveira <[email protected]>:
> >
> >> The example request you show is targeting fmsi:Fertilization type:
> >> http://mygeoserver.uni-hohenheim.de:8080/geoserver/wfs?service=WFS&Version=1.1.0&Request=GetFeature&typeName=fmis:Fertilization
> >>
> >> You probably want to use fmis:Crop as the type name parameter.
> >>
> >> On 07/19/2017 09:12 PM, Markus Jackenkroll wrote:
> >>> Hey,
> >>>
> >>> you are right. I changed the target attribute of the ID mapping:
> >>> ...
> >>>            <attributeMappings>
> >>>                <AttributeMapping>
> >>>                    <targetAttribute>
> >>>                        fmis:Crop
> >>>                    </targetAttribute>
> >>>                    <idExpression>
> >>>                        <OCQL>ID</OCQL>
> >>>                    </idExpression>
> >>>                </AttributeMapping>
> >>> ...
> >>> After restarting the tomcat the request still gives the same result 
> >>> (fmis:Fertilization not found). I searched for the fmis:Fertilization 
> >>> expression to all files but could not find it anywhere. I deleted the 
> >>> cache of tomcat (work/Catalina/...) and browser as well. I does not 
> >>> result in a change.
> >>>
> >>> Regards,
> >>> Markus
> >>>
> >>>
> >>>
> >>> Zitat von Nuno Oliveira <[email protected]>:
> >>>
> >>>> Hi,
> >>>>
> >>>> You are using fmis:Fertilization as the target element on the ID mapping.
> >>>> When using the idExpression the target attribute must be an existing 
> >>>> element
> >>>> in this case it should be fmis:Crop.
> >>>>
> >>>> Regards,
> >>>>
> >>>> Nuno Oliveira
> >>>>
> >>>> On 07/17/2017 03:07 PM, Markus Jackenkroll wrote:
> >>>>> Dear list,
> >>>>>
> >>>>> I implemented my own application schema on geoserver. The user interface
> >>>>> shows workspace, store and layer as enabled. Next, I tried to request
> >>>>> the WFS by
> >>>>> http://mygeoserver.uni-hohenheim.de:8080/geoserver/wfs?service=WFS&Version=1.1.0&Request=GetFeature&typeName=fmis:Fertilization.
> >>>>>
> >>>>> It responded with an error:
> >>>>> Error occurred getting features
> >>>>> http://myserver.uni-hohenheim.de/XSD:Fertilization not found. Available:
> >>>>> [http://myserver.uni-hohenheim.de/XSD:Crop]
> >>>>>
> >>>>> I suspect the error in the mapping:
> >>>>> ...
> >>>>>    <typeMappings>
> >>>>>        <FeatureTypeMapping>
> >>>>> <sourceDataStore>datastoreshp</sourceDataStore>
> >>>>> <sourceType>Fertilization</sourceType>
> >>>>> <targetElement>fmis:Crop</targetElement>
> >>>>>            <attributeMappings>
> >>>>>                <AttributeMapping>
> >>>>>                    <targetAttribute>
> >>>>>                        fmis:Fertilization
> >>>>>                    </targetAttribute>
> >>>>>                    <idExpression>
> >>>>>                        <OCQL>ID</OCQL>
> >>>>>                    </idExpression>
> >>>>>                </AttributeMapping>
> >>>>> ...
> >>>>>
> >>>>> "fmis" is the namespace, "Fertilization" the schema and "Crop" is the
> >>>>> element in the mapped XSD. By "datastoreshp" I connect to a shape which
> >>>>> feature class is named "Fertilization".
> >>>>>
> >>>>> Do you have an idea what is causing this behaviour?
> >>>>>
> >>>>> Best
> >>>>> Markus
> >>>>>
> >>>>>
> >>>>> ------------------------------------------------------------------------------
> >>>>> Check out the vibrant tech community on one of the world's most
> >>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >>>>> _______________________________________________
> >>>>> Geoserver-users mailing list
> >>>>>
> >>>>> Please make sure you read the following two resources before posting to 
> >>>>> this list:
> >>>>> - Earning your support instead of buying it, but Ian Turton: 
> >>>>> http://www.ianturton.com/talks/foss4g.html#/
> >>>>> - The GeoServer user list posting guidelines: 
> >>>>> http://geoserver.org/comm/userlist-guidelines.html
> >>>>>
> >>>>> [email protected]
> >>>>> https://lists.sourceforge.net/lists/listinfo/geoserver-users
> >>>>>
> >>>>
> >>>> -- 
> >>>> Regards,
> >>>> Nuno Oliveira
> >>>> ==
> >>>> GeoServer Professional Services from the experts! Visit 
> >>>> http://goo.gl/it488V for more information.
> >>>> ==
> >>>>
> >>>> Nuno Miguel Carvalho Oliveira
> >>>> @nmcoliveira
> >>>> Software Engineer
> >>>>
> >>>> GeoSolutions S.A.S.
> >>>> Via di Montramito 3/A
> >>>> 55054  Massarosa (LU)
> >>>> Italy
> >>>> phone: +39 0584 962313
> >>>> fax:      +39 0584 1660272
> >>>>
> >>>> http://www.geo-solutions.it
> >>>> http://twitter.com/geosolutions_it
> >>>>
> >>>> -------------------------------------------------------
> >>>> AVVERTENZE AI SENSI DEL D.Lgs. 196/2003
> >>>> Le informazioni contenute in questo messaggio di posta elettronica e/o 
> >>>> nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il 
> >>>> loro utilizzo è consentito esclusivamente al destinatario del messaggio, 
> >>>> per le finalità indicate nel messaggio stesso. Qualora riceviate questo 
> >>>> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di 
> >>>> darcene notizia via e-mail e di procedere alla distruzione del messaggio 
> >>>> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio 
> >>>> stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, 
> >>>> copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento 
> >>>> contrario ai principi dettati dal D.Lgs. 196/2003.
> >>>> The information in this message and/or attachments, is intended solely 
> >>>> for the attention and use of the named addressee(s) and may be 
> >>>> confidential or proprietary in nature or covered by the provisions of 
> >>>> privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data 
> >>>> Protection Code).Any use not in accord with its purpose, any disclosure, 
> >>>> reproduction, copying, distribution, or either dissemination, either 
> >>>> whole or partial, is strictly forbidden except previous formal approval 
> >>>> of the named addressee(s). If you are not the intended recipient, please 
> >>>> contact immediately the sender by telephone, fax or e-mail and delete 
> >>>> the information in this message that has been received in error. The 
> >>>> sender does not give any warranty or accept liability as the content, 
> >>>> accuracy or completeness of sent messages and accepts no responsibility  
> >>>> for changes made after they were sent or for other risks which arise as 
> >>>> a result of e-mail transmission, viruses, etc.
> >>>>
> >>>>
> >>>> ------------------------------------------------------------------------------
> >>>> Check out the vibrant tech community on one of the world's most
> >>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >>>> _______________________________________________
> >>>> Geoserver-users mailing list
> >>>>
> >>>> Please make sure you read the following two resources before posting to 
> >>>> this list:
> >>>> - Earning your support instead of buying it, but Ian Turton: 
> >>>> http://www.ianturton.com/talks/foss4g.html#/
> >>>> - The GeoServer user list posting guidelines: 
> >>>> http://geoserver.org/comm/userlist-guidelines.html
> >>>>
> >>>> [email protected]
> >>>> https://lists.sourceforge.net/lists/listinfo/geoserver-users
> >>>
> >>>
> >>>
> >>>
> >>> ------------------------------------------------------------------------------
> >>> Check out the vibrant tech community on one of the world's most
> >>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >>> _______________________________________________
> >>> Geoserver-users mailing list
> >>>
> >>> Please make sure you read the following two resources before posting to 
> >>> this list:
> >>> - Earning your support instead of buying it, but Ian Turton: 
> >>> http://www.ianturton.com/talks/foss4g.html#/
> >>> - The GeoServer user list posting guidelines: 
> >>> http://geoserver.org/comm/userlist-guidelines.html
> >>>
> >>> [email protected]
> >>> https://lists.sourceforge.net/lists/listinfo/geoserver-users
> >>
> >> -- 
> >> Regards,
> >> Nuno Oliveira
> >> ==
> >> GeoServer Professional Services from the experts! Visit 
> >> http://goo.gl/it488V for more information.
> >> ==
> >>
> >> Nuno Miguel Carvalho Oliveira
> >> @nmcoliveira
> >> Software Engineer
> >>
> >> GeoSolutions S.A.S.
> >> Via di Montramito 3/A
> >> 55054  Massarosa (LU)
> >> Italy
> >> phone: +39 0584 962313
> >> fax:      +39 0584 1660272
> >>
> >> http://www.geo-solutions.it
> >> http://twitter.com/geosolutions_it
> >>
> >> -------------------------------------------------------
> >> AVVERTENZE AI SENSI DEL D.Lgs. 196/2003
> >> Le informazioni contenute in questo messaggio di posta elettronica e/o 
> >> nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il 
> >> loro utilizzo è consentito esclusivamente al destinatario del messaggio, 
> >> per le finalità indicate nel messaggio stesso. Qualora riceviate questo 
> >> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di 
> >> darcene notizia via e-mail e di procedere alla distruzione del messaggio 
> >> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, 
> >> divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od 
> >> utilizzarlo per finalità diverse, costituisce comportamento contrario ai 
> >> principi dettati dal D.Lgs. 196/2003.
> >>  The information in this message and/or attachments, is intended solely 
> >> for the attention and use of the named addressee(s) and may be 
> >> confidential or proprietary in nature or covered by the provisions of 
> >> privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data 
> >> Protection Code).Any use not in accord with its purpose, any disclosure, 
> >> reproduction, copying, distribution, or either dissemination, either whole 
> >> or partial, is strictly forbidden except previous formal approval of the 
> >> named addressee(s). If you are not the intended recipient, please contact 
> >> immediately the sender by telephone, fax or e-mail and delete the 
> >> information in this message that has been received in error. The sender 
> >> does not give any warranty or accept liability as the content, accuracy or 
> >> completeness of sent messages and accepts no responsibility  for changes 
> >> made after they were sent or for other risks which arise as a result of 
> >> e-mail transmission, viruses, etc.
> >>
> >>
> >> ------------------------------------------------------------------------------
> >> Check out the vibrant tech community on one of the world's most
> >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >> _______________________________________________
> >> Geoserver-users mailing list
> >>
> >> Please make sure you read the following two resources before posting to 
> >> this list:
> >> - Earning your support instead of buying it, but Ian Turton: 
> >> http://www.ianturton.com/talks/foss4g.html#/
> >> - The GeoServer user list posting guidelines: 
> >> http://geoserver.org/comm/userlist-guidelines.html
> >>
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/geoserver-users
> >
> >
> >
> >
> > ------------------------------------------------------------------------------
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > _______________________________________________
> > Geoserver-users mailing list
> >
> > Please make sure you read the following two resources before posting to 
> > this list:
> > - Earning your support instead of buying it, but Ian Turton: 
> > http://www.ianturton.com/talks/foss4g.html#/
> > - The GeoServer user list posting guidelines: 
> > http://geoserver.org/comm/userlist-guidelines.html
> >
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/geoserver-users
> 



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Geoserver-users mailing list

Please make sure you read the following two resources before posting to this 
list:
- Earning your support instead of buying it, but Ian Turton: 
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines: 
http://geoserver.org/comm/userlist-guidelines.html

[email protected]
https://lists.sourceforge.net/lists/listinfo/geoserver-users

Reply via email to