Hi, Thanks for the confirmation, so if monitoring plugin is working some of this libs need to be upgraded.
In your case you can do the following, remove the hibernate libraries of one of the plugins. The versions are so close that without the class path clash things will probably work just fine. If you are building the plugin by your self you may just want o create a fat JAR that will shade the hibernate libraries an include them on the fat JAR. A word of caution, all the solutions above are just *temporary solutions* and should no be pushed to production without being carefully tested. The correct solution here is to equalize the hibernate dependencies of the two plugins (this is why dependencies should be declared on GeoServer main pom.xml dependency management so this issue can be avoided). The current hibernate upgrade will (probably) do that for you. Regarding the ELK (Elasticsearch, Losgstash and Kibana) stack [1] is a solution that is specially useful when you need to aggregate the logs o several GeoServers a visualize them on some unified UI. Regards, Nuno Oliveira [1] https://www.elastic.co/fr/webinars/introduction-elk-stack On 08/31/2017 07:01 AM, Steve Omondi wrote:
Hi Nuno, You mentioned ELK stack, how do you use these to visualize and analyze the monitor data. Especially, I'd like to persist the data somehow so I can reuse the data. Could you point me to some simple and perhaps free tool for this. Thanks Kind regards, Steve Omondi On Thu, Aug 31, 2017 at 8:29 AM, Steve Omondi <[email protected] <mailto:[email protected]>> wrote: Hi Nuno, The second case is correct. I have monitor-hibernate working as expected in one instance of geoserver without Geofence and correctly persisting monitoring data in a Postgis db. I also have Geofence (embedded) also working as expected in another instance of geoserver without monitor hibernate. I have looked at the common .JARS from the two and there versions are different in almost all of them. I will reproduce the Error logs and share here. Kind regards, Steve Omondi On Wed, Aug 30, 2017 at 5:53 PM, Nuno Oliveira <[email protected] <mailto:[email protected]>> wrote: Hi Steve, I saw your mail in the /[Geoserver-devel] upgrade geofence hibernate/ thread, I'm answering here because there is one thing you may want to check first. Is the monitor-hibernate-plugin actually working ? I have in mind that the last time I try it it was actually not working ... typically I store the audit files in the file system and use an ELK stack or something similar to handle them. That say, if the monitor-hibernate-plugin is working as expected but is using a different version of hibernate non compatible with the version used by GeoFence ... well one of this modules will need to be upgraded. Can you share with the ML the output log show when GeoServer doesn't starts ? Regards, On 08/28/2017 08:24 AM, Steve Omondi wrote:Hey guys, I have Geofence Embedded working in Geoserver-2.11.2 and when I install monitor-hibernate-plugin Geofence is broken and Geoserver doesn't start. I need the Monitoring plugin to work with External Postgis database as well as Geofence internal server? How can I make sure these two work in harmony. So far I think the .jar files in the two are of different versions which is causing problems. I need a solution for this. Kind regards, Steve Omondi <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org!http://sdm.link/slashdot _______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton:http://www.ianturton.com/talks/foss4g.html#/ <http://www.ianturton.com/talks/foss4g.html#/> - The GeoServer user list posting guidelines:http://geoserver.org/comm/userlist-guidelines.html <http://geoserver.org/comm/userlist-guidelines.html> [email protected] <mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/geoserver-users <https://lists.sourceforge.net/lists/listinfo/geoserver-users>-- Regards,Nuno Oliveira == GeoServer Professional Services from the experts! Visithttp://goo.gl/it488V for more information. == Nuno Miguel Carvalho Oliveira @nmcoliveira Software Engineer GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 http://www.geo-solutions.it http://twitter.com/geosolutions_it <http://twitter.com/geosolutions_it> ------------------------------------------------------- AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003.The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc.------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ <http://www.ianturton.com/talks/foss4g.html#/> - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html <http://geoserver.org/comm/userlist-guidelines.html> [email protected] <mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/geoserver-users <https://lists.sourceforge.net/lists/listinfo/geoserver-users>
-- Regards, Nuno Oliveira == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Nuno Miguel Carvalho Oliveira @nmcoliveira Software Engineer GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) Italy phone: +39 0584 962313 fax: +39 0584 1660272 http://www.geo-solutions.it http://twitter.com/geosolutions_it ------------------------------------------------------- AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003.The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc.
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html [email protected] https://lists.sourceforge.net/lists/listinfo/geoserver-users
