Dear Sebastian,
I don't see anything obviously wrong, we might need to investigate deeper.

One quick, is what driver/plugin do you use for JPEG2000?
That fact things work when the two GeoServer's are deployed make me wonder
if this is a problem with some libs missing in the standard deploy of 2.12.


Regards,
Simone Giannecchini
==
GeoServer Professional Services from the experts!
Visit http://goo.gl/it488V for more information.
==
Ing. Simone Giannecchini
@simogeo
Founder/Director

GeoSolutions S.A.S.
Via di Montramito 3/A
55054  Massarosa (LU)
Italy
phone: +39 0584 962313
fax:     +39 0584 1660272
mob:   +39  333 8128928

http://www.geo-solutions.it
http://twitter.com/geosolutions_it

-------------------------------------------------------
AVVERTENZE AI SENSI DEL D.Lgs. 196/2003
Le informazioni contenute in questo messaggio di posta elettronica e/o
nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il
loro utilizzo è consentito esclusivamente al destinatario del messaggio,
per le finalità indicate nel messaggio stesso. Qualora riceviate questo
messaggio senza esserne il destinatario, Vi preghiamo cortesemente di
darcene notizia via e-mail e di procedere alla distruzione del messaggio
stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso,
divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od
utilizzarlo per finalità diverse, costituisce comportamento contrario ai
principi dettati dal D.Lgs. 196/2003.

The information in this message and/or attachments, is intended solely for
the attention and use of the named addressee(s) and may be confidential or
proprietary in nature or covered by the provisions of privacy act
(Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
Code).Any use not in accord with its purpose, any disclosure, reproduction,
copying, distribution, or either dissemination, either whole or partial, is
strictly forbidden except previous formal approval of the named
addressee(s). If you are not the intended recipient, please contact
immediately the sender by telephone, fax or e-mail and delete the
information in this message that has been received in error. The sender
does not give any warranty or accept liability as the content, accuracy or
completeness of sent messages and accepts no responsibility  for changes
made after they were sent or for other risks which arise as a result of
e-mail transmission, viruses, etc.

On Wed, Feb 21, 2018 at 6:36 PM, <sebastian.janit...@ldbv.bayern.de> wrote:

> Hi,
>
>
>
> since upgrade to geoserver 2.12.0 using the ImageMosaicJDBC Plugin our wms
> layer does not provide jpeg 2000 data.
>
>
>
> Our raster data store as a pyramid in a oracle database.
>
> We use 4 band tiff files for the low and 4 band jpeg 2000 files for the
> high resolution images.
>
> Before update to geoserver 2.12.0 we have no problems, the switch from the
> tiff to the jpeg 2000 files and back works fine.
>
>
>
> Actually we using a workaround. We find out, if there an older version of
> geoserver (2.10 or 2.11)  is running in the same tomcat container,
> everything is fine.
>
> But if we stop the older version of geoserver, our wms layer doesn't
> deliver the jpeg 2000 files ( see the logfile snippets below).
>
> Temporary this workaround is ok for us, but not for the long term.
>
>
>
> Any Ideas?
>
>
>
>
>
> regards,
>
> Sebastian
>
>
>
>
>
> Tomcat 8.0.41
>
> Java 1.8.0_111
>
> Linux and Windows 7
>
>
>
> logfile, only geoserver 2.12.0 is running:
>
>
>
> 2018-02-21 18:11:10,729 WARN [imagemosaic.jdbc] - Could not read 914277
> from stream, switch to JAI
>
> 2018-02-21 18:11:10,729 WARN [imagemosaic.jdbc] - Could not read 914273
> from stream, switch to JAI
>
> 2018-02-21 18:11:10,763 WARN [imagemosaic.jdbc] - Could not read 914275
> from stream, switch to JAI
>
> 2018-02-21 18:11:10,796 WARN [imagemosaic.jdbc] - Could not read 914279
> from stream, switch to JAI
>
> 2018-02-21 18:11:10,796 WARN [imagemosaic.jdbc] - Could not read 914278
> from stream, switch to JAI
>
> 2018-02-21 18:11:10,828 WARN [imagemosaic.jdbc] - Could not read 914276
> from stream, switch to JAI
>
> 2018-02-21 18:11:10,938 WARN [lite.gridcoverage2d] - Could not reduce the
> grid geometry inside the valid area bounds: ReferencedEnvelope[-36.0 :
> 54.0, -85.0 : 85.0]
>
> Grid geometry isGridGeometry2D[GeneralGridEnvelope[0..1464, 0..956],
> PARAM_MT["Affine",
>
>   PARAMETER["num_row", 3],
>
>   PARAMETER["num_col", 3],
>
>   PARAMETER["elt_0_0", 0.3150763362010388],
>
>   PARAMETER["elt_0_2", 32555504.087072816],
>
>   PARAMETER["elt_1_1", -0.31507633619843484],
>
>   PARAMETER["elt_1_2", 5265164.783295045]]]
>
> 2018-02-21 18:11:10,938 WARN [lite.gridcoverage2d] - Could not reduce the
> grid geometry inside the valid area bounds: ReferencedEnvelope[-36.0 :
> 54.0, -85.0 : 85.0]
>
> Grid geometry isGridGeometry2D[GeneralGridEnvelope[0..1464, 0..956],
> PARAM_MT["Affine",
>
>   PARAMETER["num_row", 3],
>
>   PARAMETER["num_col", 3],
>
>   PARAMETER["elt_0_0", 0.3150763362010388],
>
>   PARAMETER["elt_0_2", 32555504.087072816],
>
>   PARAMETER["elt_1_1", -0.31507633619843484],
>
>   PARAMETER["elt_1_2", 5265164.783295045]]]
>
>
>
>
>
> logfile, if in the same tomcat container geoserver 2.12.0 and 2.11.0 is
> running:
>
>
>
> 2018-02-21 18:13:22,149 WARN [lite.gridcoverage2d] - Could not reduce the
> grid geometry inside the valid area bounds: ReferencedEnvelope[-36.0 :
> 54.0, -85.0 : 85.0]
>
> Grid geometry isGridGeometry2D[GeneralGridEnvelope[0..1464, 0..956],
> PARAM_MT["Affine",
>
>   PARAMETER["num_row", 3],
>
>   PARAMETER["num_col", 3],
>
>   PARAMETER["elt_0_0", 0.3150763362010388],
>
>   PARAMETER["elt_0_2", 32555504.087072816],
>
>   PARAMETER["elt_1_1", -0.31507633619843484],
>
>   PARAMETER["elt_1_2", 5265164.783295045]]]
>
> 2018-02-21 18:13:22,149 WARN [lite.gridcoverage2d] - Could not reduce the
> grid geometry inside the valid area bounds: ReferencedEnvelope[-36.0 :
> 54.0, -85.0 : 85.0]
>
> Grid geometry isGridGeometry2D[GeneralGridEnvelope[0..1464, 0..956],
> PARAM_MT["Affine",
>
>   PARAMETER["num_row", 3],
>
>   PARAMETER["num_col", 3],
>
>   PARAMETER["elt_0_0", 0.3150763362010388],
>
>   PARAMETER["elt_0_2", 32555504.087072816],
>
>   PARAMETER["elt_1_1", -0.31507633619843484],
>
>   PARAMETER["elt_1_2", 5265164.783295045]]]
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Geoserver-users mailing list
>
> Please make sure you read the following two resources before posting to
> this list:
> - Earning your support instead of buying it, but Ian Turton:
> http://www.ianturton.com/talks/foss4g.html#/
> - The GeoServer user list posting guidelines: http://geoserver.org/comm/
> userlist-guidelines.html
>
> If you want to request a feature or an improvement, also see this:
> https://github.com/geoserver/geoserver/wiki/Successfully-
> requesting-and-integrating-new-features-and-improvements-in-GeoServer
>
>
> Geoserver-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Geoserver-users mailing list

Please make sure you read the following two resources before posting to this 
list:
- Earning your support instead of buying it, but Ian Turton: 
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines: 
http://geoserver.org/comm/userlist-guidelines.html

If you want to request a feature or an improvement, also see this: 
https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer


Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users

Reply via email to