I noticed the same problem when I upgraded from 2.18.2 to 2.19.0 I created an issue in JIRA for it which has been put into the wish list. Here is a link to the issue if you would like to add to it: https://osgeo-org.atlassian.net/browse/GEOS-10100
From: Vera Green <vera.green...@gmail.com> Sent: Saturday, 30 October 2021 1:36 PM To: franz.hueb...@telekom.de Cc: GeoServer Mailing List List <geoserver-users@lists.sourceforge.net> Subject: Re: [Geoserver-users] proxy url redirecting connection from localhost in 2.19.3 / 2.20.0 Very interested in this issue as I had the same problem but no time to delve into it. Great details. Hope someone can help. On Fri., Oct. 29, 2021, 6:48 a.m. , <franz.hueb...@telekom.de<mailto:franz.hueb...@telekom.de>> wrote: Hi, currently we are upgrading some Geoserver instances to 2.19.3 / 2.20.0 and play around with them. To configure some parts we are using the web-management through a local tunnel like http://localhost:8080/geoserver/web/. The normal user connection is using a reverse proxy in front. To realize this we enabled the proxy url in the global config : proxy_url = https://internal-domain/geoserver. In 2.18.3 and below this way was working without redirecting from the localhost. In 2.19.3 / 2.20.0 this is not working anymore because you always get redirected to https://internal-domain/geoserver even when using the web interface over localhost. Is this a bug or is it the intended way of the proxy functionality which changed in the new version? To reproduce: -setup a tomcat with an Geoserver instance and enable the proxy url -connect via localhost and try to login -get redirected after login to the proxy base url I could not find anything in the issue tracker / mailing list therefore, I am asking here 😊. If anything else is needed to reproduce this I will try to provide it. Regards, Franz H. _______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/<https://aus01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.ianturton.com%2Ftalks%2Ffoss4g.html%23%2F&data=04%7C01%7Cgraham.humphries%40stategrowth.tas.gov.au%7Ce9de0f01713c4de9c5b908d99b5206e6%7C64ebab8accf44b5ca2d32b4e972d96b2%7C0%7C0%7C637711599920742484%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=h6Mmw2VNlpldDGkRb%2B9oXBgv2XK5kLFV783OY1Hyk5g%3D&reserved=0> - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html<https://aus01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fgeoserver.org%2Fcomm%2Fuserlist-guidelines.html&data=04%7C01%7Cgraham.humphries%40stategrowth.tas.gov.au%7Ce9de0f01713c4de9c5b908d99b5206e6%7C64ebab8accf44b5ca2d32b4e972d96b2%7C0%7C0%7C637711599920752480%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=nYx5pBLYjh%2Bw8eCAoisa0yOiFV%2F%2FoNhMHNb3%2BjzWPlM%3D&reserved=0> If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fgeoserver%2Fgeoserver%2Fwiki%2FSuccessfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer&data=04%7C01%7Cgraham.humphries%40stategrowth.tas.gov.au%7Ce9de0f01713c4de9c5b908d99b5206e6%7C64ebab8accf44b5ca2d32b4e972d96b2%7C0%7C0%7C637711599920752480%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=qDZYudooDh77NfClLmNDkUh1W4teXQV92MDn5qd3vs0%3D&reserved=0> Geoserver-users@lists.sourceforge.net<mailto:Geoserver-users@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/geoserver-users<https://aus01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Fgeoserver-users&data=04%7C01%7Cgraham.humphries%40stategrowth.tas.gov.au%7Ce9de0f01713c4de9c5b908d99b5206e6%7C64ebab8accf44b5ca2d32b4e972d96b2%7C0%7C0%7C637711599920762475%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=HxRdNVbcJjLBqUfxr6X%2FLZtAryQjoWQgs2Q%2F4aMTY6w%3D&reserved=0> ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission.
_______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
