Maybe try libjpeg-turbo:2.1.2 which is the one installed in the official Docker image?
https://github.com/camptocamp/docker-geoserver/blob/master/Dockerfile#L23C1-L24C1 *camptocamp* INNOVATIVE SOLUTIONS BY OPEN SOURCE EXPERTS *Gabriel Roldán* Geospatial Developer On Tue, May 7, 2024 at 1:22 AM Alexandre Gacon <alexandre.ga...@gmail.com> wrote: > Hello, > > My GeoServer version is the 2.25.0 version, with a 3.0.2 libjpeg-turbo > version. > > I have COG files which are displayed normally with the libjpegturbo > extension disabled but which bring errors in my WMS requests when I enable > the extension. > > The log file is attached to this mail. > > And the gdal info output for my test file is: > > Driver: GTiff/GeoTIFF Files: > /home/agacon/qdn/argocd-gs-quai-des-notaires-apps/PLANIGN08_0440_6950_L93.tif > Size is 500, 500 Coordinate System is: PROJCRS["RGF93 v1 / Lambert-93", > BASEGEOGCRS["RGF93 v1", DATUM["Reseau Geodesique Francais 1993 v1", > ELLIPSOID["GRS 1980",6378137,298.257222101, LENGTHUNIT["metre",1]]], > PRIMEM["Greenwich",0, ANGLEUNIT["degree",0.0174532925199433]], > ID["EPSG",4171]], CONVERSION["Lambert-93", METHOD["Lambert Conic Conformal > (2SP)", ID["EPSG",9802]], PARAMETER["Latitude of false origin",46.5, > ANGLEUNIT["degree",0.0174532925199433], ID["EPSG",8821]], > PARAMETER["Longitude of false origin",3, > ANGLEUNIT["degree",0.0174532925199433], ID["EPSG",8822]], > PARAMETER["Latitude of 1st standard parallel",49, > ANGLEUNIT["degree",0.0174532925199433], ID["EPSG",8823]], > PARAMETER["Latitude of 2nd standard parallel",44, > ANGLEUNIT["degree",0.0174532925199433], ID["EPSG",8824]], > PARAMETER["Easting at false origin",700000, LENGTHUNIT["metre",1], > ID["EPSG",8826]], PARAMETER["Northing at false origin",6600000, > LENGTHUNIT["metre",1], ID["EPSG",8827]]], CS[Cartesian,2], AXIS["easting > (X)",east, ORDER[1], LENGTHUNIT["metre",1]], AXIS["northing (Y)",north, > ORDER[2], LENGTHUNIT["metre",1]], USAGE[ SCOPE["Engineering survey, > topographic mapping."], AREA["France - onshore and offshore, mainland and > Corsica (France métropolitaine including Corsica)."], > BBOX[41.15,-9.86,51.56,10.38]], ID["EPSG",2154]] Data axis to CRS axis > mapping: 1,2 Origin = (440000.000000000000000,6950000.000000000000000) > Pixel Size = (400.000000000000000,-400.000000000000000) Metadata: > AREA_OR_POINT=Area Image Structure Metadata: LAYOUT=COG COMPRESSION=LZW > INTERLEAVE=PIXEL PREDICTOR=2 Corner Coordinates: Upper Left ( 440000.000, > 6950000.000) ( 0d35'44.76"W, 49d35'45.32"N) Lower Left ( 440000.000, > 6750000.000) ( 0d28'26.95"W, 47d47'56.07"N) Upper Right ( 640000.000, > 6950000.000) ( 2d10'10.79"E, 49d38'46.66"N) Lower Right ( 640000.000, > 6750000.000) ( 2d11'52.02"E, 47d50'51.55"N) Center ( 540000.000, > 6850000.000) ( 0d49'27.77"E, 48d43'49.03"N) Band 1 Block=512x512 Type=Byte, > ColorInterp=Red Band 2 Block=512x512 Type=Byte, ColorInterp=Green Band 3 > Block=512x512 Type=Byte, ColorInterp=Blue > > WHen I don't use cog files (for example with WMS requests on postgis db), > I have no errors. > > What could be the issue? > > -- > Alexandre Gacon > _______________________________________________ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to > this list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users >
_______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
