Indeed it did. Looking at change-set, some of the version updates were major versions, so thats probably a good place to start.
I'm going to try manually splitting up the changes, and look and see if specific subsets/version changes pass / fail. In general, the various version updates seem useful, so I'd like to avoid reverting all of them if possible. Torben On Thu, Sep 20, 2018 at 10:43 AM Andrea Aime <andrea.a...@geo-solutions.it> wrote: > Funny enough, the Travis build passed. I've forced a restart to see if > it's repeatable > > Cheers > Andrea > > On Thu, Sep 20, 2018 at 7:09 PM Torben Barsballe < > tbarsba...@boundlessgeo.com> wrote: > >> Its something I can try. >> Based on the failure, and the contents of that commit, I'm still not >> entirely certain the commit is the cause of the issue - its quite possible >> that there is something else wrong with travis that just so happened to >> occur around the same time. >> >> However, this may help rule out causes, so I've created such a PR here: >> https://github.com/geotools/geotools/pull/2051 >> >> >> >> On Thu, Sep 20, 2018 at 9:56 AM Andrea Aime <andrea.a...@geo-solutions.it> >> wrote: >> >>> Thinking out loud, what if you make a PR where that commit gets >>> reverted, would that fix it? >>> >>> Cheers >>> Andrea >>> >>> >>> On Thu, Sep 20, 2018 at 6:54 PM Torben Barsballe < >>> tbarsba...@boundlessgeo.com> wrote: >>> >>>> Okay, after testing on Jenkins, this seems to only be a problem on >>>> Travis - the same lines execute quite quickly in the Jenkins build. >>>> >>>> This problem appears to affect all GeoTools travis builds made since >>>> September 16. First build I could find that showed the issue was >>>> https://travis-ci.org/geotools/geotools/builds/429272586?utm_source=github_status&utm_medium=notification >>>> >>>> (Note that the build for that PR >>>> <https://github.com/geotools/geotools/pull/2022> was fine, but the >>>> build of the commit >>>> <https://github.com/geotools/geotools/commit/d05a1818510d28f862870de702b539ffb9bbe6ff> >>>> after it was merged to master was not). >>>> >>>> I'm really not sure what is going on here - if anyone has any ideas >>>> they would be most appreciated. >>>> >>>> Torben >>>> >>>> On Wed, Sep 19, 2018 at 1:46 PM Torben Barsballe < >>>> tbarsba...@boundlessgeo.com> wrote: >>>> >>>>> I've been seeing this a lot recently in the GeoTools Travis CI builds, >>>>> across various different GeoTools PRs: >>>>> >>>>> [INFO] Installing >>>>> /home/travis/build/geotools/geotools/modules/ogc/net.opengis.wmts/target/net.opengis.wmts-21-SNAPSHOT.jar >>>>> to >>>>> /home/travis/.m2/repository/org/geotools/ogc/net.opengis.wmts/21-SNAPSHOT/net.opengis.wmts-21-SNAPSHOT.jar >>>>> [INFO] Installing >>>>> /home/travis/build/geotools/geotools/modules/ogc/net.opengis.wmts/pom.xml >>>>> to >>>>> /home/travis/.m2/repository/org/geotools/ogc/net.opengis.wmts/21-SNAPSHOT/net.opengis.wmts-21-SNAPSHOT.pom >>>>> [INFO] Installing >>>>> /home/travis/build/geotools/geotools/modules/ogc/net.opengis.wmts/target/net.opengis.wmts-21-SNAPSHOT-sources.jar >>>>> to >>>>> /home/travis/.m2/repository/org/geotools/ogc/net.opengis.wmts/21-SNAPSHOT/net.opengis.wmts-21-SNAPSHOT-sources.jar >>>>> >>>>> >>>>> No output has been received in the last 10m0s, this potentially indicates >>>>> a stalled build or something wrong with the build itself. >>>>> Check the details on how to adjust your build configuration on: >>>>> https://docs.travis-ci.com/user/common-build-problems/#Build-times-out-because-no-output-was-received >>>>> >>>>> The build has been terminated >>>>> >>>>> >>>>> The build always seems to terminate at the same point, right after >>>>> attempring to install >>>>> /home/travis/build/geotools/geotools/modules/ogc/net.opengis.wmts/target/net.opengis.wmts-21-SNAPSHOT-sources.jar >>>>> to >>>>> /home/travis/.m2/repository/org/geotools/ogc/net.opengis.wmts/21-SNAPSHOT/net.opengis.wmts-21-SNAPSHOT-sources.jar >>>>> >>>>> I'm not quite sure what is causing it ... based on the logs I would >>>>> guess an error uploading the jar. Perhaps a permissions problem or lack of >>>>> disk space? >>>>> >>>>> I'm not seeing any similar failures in appveyor or Jenkins. >>>>> >>>>> For now, I'm going to wait until Jenkins is actually up-to-date (and >>>>> run a nightly build, then try restarting the Travis CI, but if anyone has >>>>> any other ideas as to what is causing this issue I would be interested in >>>>> hearing them. >>>>> >>>>> Torben >>>>> >>>>> >>>>> _______________________________________________ >>>> GeoTools-Devel mailing list >>>> GeoTools-Devel@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/geotools-devel >>>> >>> >>> >>> -- >>> >>> Regards, Andrea Aime == GeoServer Professional Services from the >>> experts! Visit http://goo.gl/it488V for more information. == Ing. >>> Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito >>> 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: >>> +39 339 8844549 http://www.geo-solutions.it >>> http://twitter.com/geosolutions_it >>> ------------------------------------------------------- *Con >>> riferimento alla normativa sul trattamento dei dati personali (Reg. UE >>> 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si >>> precisa che ogni circostanza inerente alla presente email (il suo >>> contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è >>> riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il >>> messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra >>> operazione è illecita. Le sarei comunque grato se potesse darmene notizia. >>> This email is intended only for the person or entity to which it is >>> addressed and may contain information that is privileged, confidential or >>> otherwise protected from disclosure. We remind that - as provided by >>> European Regulation 2016/679 “GDPR” - copying, dissemination or use of this >>> e-mail or the information herein by anyone other than the intended >>> recipient is prohibited. If you have received this email by mistake, please >>> notify us immediately by telephone or e-mail.* >>> >> > > -- > > Regards, Andrea Aime == GeoServer Professional Services from the experts! > Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime > @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 > Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 > 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it > ------------------------------------------------------- *Con riferimento > alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - > Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni > circostanza inerente alla presente email (il suo contenuto, gli eventuali > allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i > destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per > errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le > sarei comunque grato se potesse darmene notizia. This email is intended > only for the person or entity to which it is addressed and may contain > information that is privileged, confidential or otherwise protected from > disclosure. We remind that - as provided by European Regulation 2016/679 > “GDPR” - copying, dissemination or use of this e-mail or the information > herein by anyone other than the intended recipient is prohibited. If you > have received this email by mistake, please notify us immediately by > telephone or e-mail.* >
_______________________________________________ GeoTools-Devel mailing list GeoTools-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geotools-devel
