Bonsoir,
Merci pour ta réponse, voici le fichier my.ini en doc joint.
Dans l'espoir que cela pourra t'aider.
pascal Dieudonné
Le 24/02/2016 13:31, Stephane Boireau a écrit :
Bonjour,
Le 24/02/2016 10:07, pascal.dieudonne a écrit :
Je dois faire des tests sur GEPI en local. Étant sous windows 10, j'ai
installé WAMP qui fonctionne correctement. Lors de l'installation de
GEPI (primo installation) à l'étape de la création des tables, j'obtiens
le message d'erreur suivant : voir doc joint.
Pourtant, 235 tables ont bien été crées. Les versions PHP et MYSQL sont
bonnes, mon interclassement est le suivant : utf8_general_ci
La version d'install est la suivante 1.6.8-276fd9c
Sauriez vous d'où peut venir le pb puisque uniquement quelques tables
n'ont pu être crées. Les messages d'erreur sont pour moi peu parlants
(valeur par défaut invalide)
Le paramétrage de ton serveur WAMP pose un problème.
Il me semblait qu'on avait déjà eu une erreur de ce genre, mais je ne
retrouve pas.
Sur le net, on trouve:
http://dev.mysql.com/doc/refman/5.7/en/sql-mode.html#sqlmode_no_zero_date
As-tu un fichier de config du genre:
c:\wamp\bin\mysql\mysql5.1.30\my.ini
? (avec un autre numéro de version mysql peut-être)
Si oui que contient-il?
Cordialement
# Example MySQL config file for medium systems.
#
# This is for a large system with memory of 1G-2G where the system runs mainly
# MySQL.
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /tmp/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[wampmysqld]
#skip-grant-tables
port = 3306
socket = /tmp/mysql.sock
key_buffer_size = 64M
max_allowed_packet = 1M
#Added to reduce memory used (minimum is 400)
table_definition_cache = 600
sort_buffer_size = 2M
net_buffer_length = 8K
read_buffer_size = 2M
read_rnd_buffer_size = 2M
myisam_sort_buffer_size = 32M
#Path to mysql install directory
basedir="C:/wamp/bin/mysql/mysql5.7.9"
log-error="C:/wamp/logs/mysql.log"
#Verbosity Value 1 Errors only, 2 Errors and warnings , 3 Errors, warnings,
and notes
log_error_verbosity=2
#Path to data directory
datadir="C:/wamp/bin/mysql/mysql5.7.9/data"
#Path to the language
#See Documentation:
# http://dev.mysql.com/doc/refman/5.7/en/error-message-language.html
lc-messages-dir="C:/wamp/bin/mysql/mysql5.7.9/share"
lc-messages=fr_FR
# The default storage engine that will be used when create new tables
default-storage-engine=MYISAM
# New for MySQL 5.6 default_tmp_storage_engine if skip-innodb enable
# default_tmp_storage_engine=MYISAM
#To avoid warning messages
secure_file_priv="C:/wamp/tmp"
skip-ssl
explicit_defaults_for_timestamp=true
# Set the SQL mode to strict
#sql-mode="STRICT_ALL_TABLES"
sql-mode="STRICT_ALL_TABLES,ERROR_FOR_DIVISION_BY_ZERO,NO_ZERO_DATE,NO_ZERO_IN_DATE,NO_AUTO_CREATE_USER"
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Disable Federated by default
skip-federated
# Replication Master Server (default)
# binary logging is required for replication
#log-bin=mysql-bin
# binary logging format - mixed recommended
#binlog_format=mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
# New for MySQL 5.6 if no slave
skip-slave-start
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using InnoDB tables
# Chemins de mes bases de données qui sont déplacées
#innodb_data_home_dir = C:/mysql/data/
innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:/mysql/data/
#innodb_log_arch_dir = C:/mysql/data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
# Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[isamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer_size = 2M
write_buffer_size = 2M
[myisamchk]
key_buffer_size = 20M
sort_buffer_size_size = 20M
read_buffer_size = 2M
write_buffer_size = 2M
[mysqlhotcopy]
interactive-timeout
[mysqld]
port = 3306
_________________________________________________________________________________
Documentation Gepi en ligne : http://www.sylogix.org/projects/gepi/wiki
Pour modifier ou r�silier votre abonnement � cette liste :
https://lists.sylogix.net/mailman/listinfo/gepi-users
