When you generate the file from Eagle, is there an option to specify the file type? I am guessing that you have some project setting which is causing you to get the older format for this project. If you look in the fab.gbr file, you should see aperture definitions near the top. If not, then there should be a separate aperture table from Eagle but that is not really the best way to go. It is far better to find whatever setting there is to have the aperture definitions as part of the output file.
-Dan On 7/4/2013 5:19 AM, Robert von Knobloch wrote: > Using libgerbv to process gerber files from eagle, I get: > > WARNING **: Most likely found a RS-274D file...trying to open anyways > > and the file is not included in the output png. > This only occurs with some projects and not others, although all have > the same file name "fab.gbr". > Any pointers as to where to look? > > Thanks, > > Bob ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Gerbv-devel mailing list Gerbv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gerbv-devel
