hello,I had a milling file that is not recognized by Gerbv 2.7.0 on a Debian 64 bit, see attached.
Should show 8 about rectangular windows in the PCB
Can anyone help me implementing this feature? -- Valerio
Unsupported G00 (rout mode) code at line 17 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 18 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 19 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M16 (retract with clamping) code found at line 25 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G00 (rout mode) code at line 26 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 27 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 28 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M16 (retract with clamping) code found at line 34 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G00 (rout mode) code at line 35 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 36 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 37 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M16 (retract with clamping) code found at line 41 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G00 (rout mode) code at line 42 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 43 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 44 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M16 (retract with clamping) code found at line 48 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G00 (rout mode) code at line 49 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 50 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 51 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M16 (retract with clamping) code found at line 55 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G00 (rout mode) code at line 56 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 57 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 58 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M16 (retract with clamping) code found at line 62 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G00 (rout mode) code at line 63 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 64 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 65 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M16 (retract with clamping) code found at line 71 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G00 (rout mode) code at line 72 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 73 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 74 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M16 (retract with clamping) code found at line 80 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G00 (rout mode) code at line 81 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 82 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 83 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M16 (retract with clamping) code found at line 87 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G00 (rout mode) code at line 88 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M15 (Z-axis rout position) code found at line 89 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported G01 (linear mode) code at line 90 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc" Unsupported M17 (retract without clamping) code found at line 94 in file "/home/efa/Documents/GerbV_2.7.0_Linux64.nc"
GerbV_2.7.0_Linux64.nc
Description: Cdf file
_______________________________________________ Gerbv-devel mailing list Gerbv-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gerbv-devel
