pespin has uploaded this change for review. (
https://gerrit.osmocom.org/c/docker-playground/+/27063 )
Change subject: Add ttcn3-ggsn-ogs testsuite
......................................................................
Add ttcn3-ggsn-ogs testsuite
This new setup allows running TTCN3 GGSN_Tests against open5gs, which
will soon gain GTPv1C support.
Change-Id: Ia6c122fce951d369a5d2362cbe99d10d61c15f49
---
A ttcn3-ggsn-test-ogs/jenkins.sh
A ttcn3-ggsn-test-ogs/ogs
A ttcn3-ggsn-test/jenkins-ogs.sh
A ttcn3-ggsn-test/ogs/GGSN_Tests.cfg
A ttcn3-ggsn-test/ogs/freediameter.conf
A ttcn3-ggsn-test/ogs/smfd.yaml
A ttcn3-ggsn-test/ogs/upfd-setup.sh
A ttcn3-ggsn-test/ogs/upfd.sh
A ttcn3-ggsn-test/ogs/upfd.yaml
9 files changed, 1,131 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/docker-playground
refs/changes/63/27063/1
diff --git a/ttcn3-ggsn-test-ogs/jenkins.sh b/ttcn3-ggsn-test-ogs/jenkins.sh
new file mode 120000
index 0000000..b688dd2
--- /dev/null
+++ b/ttcn3-ggsn-test-ogs/jenkins.sh
@@ -0,0 +1 @@
+../ttcn3-ggsn-test/jenkins-ogs.sh
\ No newline at end of file
diff --git a/ttcn3-ggsn-test-ogs/ogs b/ttcn3-ggsn-test-ogs/ogs
new file mode 120000
index 0000000..b048f0e
--- /dev/null
+++ b/ttcn3-ggsn-test-ogs/ogs
@@ -0,0 +1 @@
+../ttcn3-ggsn-test/ogs
\ No newline at end of file
diff --git a/ttcn3-ggsn-test/jenkins-ogs.sh b/ttcn3-ggsn-test/jenkins-ogs.sh
new file mode 100755
index 0000000..57fed00
--- /dev/null
+++ b/ttcn3-ggsn-test/jenkins-ogs.sh
@@ -0,0 +1,65 @@
+#!/bin/sh
+
+. ../jenkins-common.sh
+
+KERNEL_TEST="${KERNEL_TEST:-0}"
+IMAGE_SUFFIX="${IMAGE_SUFFIX:-master}"
+docker_images_require \
+ "open5gs-$IMAGE_SUFFIX" \
+ "ttcn3-ggsn-test"
+
+set_clean_up_trap
+set -e
+
+#Make sure NET_NAME doesn't clash with the AoIP BSC test
+NET_NAME=ttcn3-ggsn-test-ogs
+
+mkdir $VOL_BASE_DIR/ggsn-tester
+cp ogs/GGSN_Tests.cfg $VOL_BASE_DIR/ggsn-tester/
+write_mp_osmo_repo "$VOL_BASE_DIR/ggsn-tester/GGSN_Tests.cfg"
+
+mkdir $VOL_BASE_DIR/ggsn
+cp ogs/smfd.yaml $VOL_BASE_DIR/ggsn/
+cp ogs/upfd.yaml $VOL_BASE_DIR/ggsn/
+cp ogs/freediameter.conf $VOL_BASE_DIR/ggsn/
+cp ogs/upfd.sh $VOL_BASE_DIR/ggsn/
+cp ogs/upfd-setup.sh $VOL_BASE_DIR/ggsn/
+
+SUBNET=3
+network_create $SUBNET
+
+# start container with ggsn (smf+upf) in background
+docker run --cap-add=NET_ADMIN \
+ --device /dev/net/tun:/dev/net/tun \
+ --sysctl net.ipv6.conf.all.disable_ipv6=0 \
+ --rm \
+ --ulimit core=-1 \
+ -v $VOL_BASE_DIR/ggsn:/data \
+ --name ${BUILD_TAG}-ggsn-ogs-smf -d \
+ $DOCKER_ARGS \
+ $(docker_network_params $SUBNET 201) \
+ $REPO_USER/open5gs-$IMAGE_SUFFIX \
+ /bin/sh -c "open5gs-smfd -c /data/smfd.yaml
>/data/open5gs-smfd.out 2>&1"
+
+docker run --cap-add=NET_ADMIN \
+ --device /dev/net/tun:/dev/net/tun \
+ --sysctl net.ipv6.conf.all.disable_ipv6=0 \
+ --rm \
+ --ulimit core=-1 \
+ -v $VOL_BASE_DIR/ggsn:/data \
+ --name ${BUILD_TAG}-ggsn-ogs-upf -d \
+ $DOCKER_ARGS \
+ $(docker_network_params $SUBNET 222) \
+ $REPO_USER/open5gs-$IMAGE_SUFFIX \
+ /bin/sh -c "/data/upfd.sh -c /data/upfd.yaml
>/data/open5gs-upfd.out 2>&1"
+
+# start docker container with testsuite in foreground
+docker run --rm \
+ --sysctl net.ipv6.conf.all.disable_ipv6=0 \
+ $(docker_network_params $SUBNET 202) \
+ --ulimit core=-1 \
+ -v $VOL_BASE_DIR/ggsn-tester:/data \
+ -e "TTCN3_PCAP_PATH=/data" \
+ --name ${BUILD_TAG}-ggsn-test \
+ $DOCKER_ARGS \
+ $REPO_USER/ttcn3-ggsn-test
diff --git a/ttcn3-ggsn-test/ogs/GGSN_Tests.cfg
b/ttcn3-ggsn-test/ogs/GGSN_Tests.cfg
new file mode 100644
index 0000000..ccbda8d
--- /dev/null
+++ b/ttcn3-ggsn-test/ogs/GGSN_Tests.cfg
@@ -0,0 +1,25 @@
+[ORDERED_INCLUDE]
+"/osmo-ttcn3-hacks/Common.cfg"
+"/osmo-ttcn3-hacks/ggsn_tests/GGSN_Tests.default"
+
+[LOGGING]
+*.JUnitLogger.testsuite_name := "GGSN_Tests"
+
+[TESTPORT_PARAMETERS]
+*.GGSNVTY.CTRL_HOSTNAME := "172.18.3.201"
+
+[MODULE_PARAMETERS]
+# our Own IP address
+GGSN_Tests.m_bind_ip_gtpc := "172.18.3.202"
+GGSN_Tests.m_bind_ip_gtpu := "172.18.3.202"
+# GGSN IP address
+GGSN_Tests.m_ggsn_ip_gtpc := "172.18.3.201"
+GGSN_Tests.m_ggsn_ip_gtpu := "172.18.3.201"
+# GGSN announced DNS address
+GGSN_Tests.m_ggsn_ip4_dns1 := "172.18.3.201"
+GGSN_Tests.m_ggsn_ip6_dns1 := "fd02:db8:3::201"
+GGSN_Tests.m_ggsn_impl := GGSN_IMPL_OPEN5GS
+
+[EXECUTE]
+#GGSN_Tests.control
+GGSN_Tests.TC_pdp4_act_deact
diff --git a/ttcn3-ggsn-test/ogs/freediameter.conf
b/ttcn3-ggsn-test/ogs/freediameter.conf
new file mode 100644
index 0000000..612bd35
--- /dev/null
+++ b/ttcn3-ggsn-test/ogs/freediameter.conf
@@ -0,0 +1,267 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included
file(s)
+# where the "include" keyword is found.
+
+
+##############################################################
+## Peer identity and realm
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "smf.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+## Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections
(TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change
in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+SecPort = 0;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA
exchange is completed
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS
protects also the
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections.
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+## Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "172.18.3.201";
+
+
+##############################################################
+## Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+## TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file
function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem",
"/etc/ssl/private/freeDiameter.key";
+TLS_Cred = "/usr/local/etc/freeDiameter/smf.cert.pem",
"/usr/local/etc/freeDiameter/smf.key.pem";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+TLS_CA = "/usr/local/etc/freeDiameter/cacert.pem";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have
been verified before.
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS
format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+# http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function,
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+## Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected
peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value
must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+## Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+## Extensions configuration
+
+# The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+# These extensions may in addition receive the name of a
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_* for extensions useful only to retrieve more information on the
framework execution.
+# acl_* : Access control list, to control which peers are allowed to connect.
+# rt_* : routing extensions that impact how messages are forwarded to other
peers.
+# app_* : applications, these extensions usually register callbacks to handle
specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter
displays some
+# information about some events. This extension does not actually use a
configuration file
+# but receives directly a parameter in the string passed to the extension.
Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default
hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with
few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information
about sent and received messages.
+# The four digits respectively control: connections, routing decisions,
sent/received messages, errors.
+# The values for each digit are:
+# 0 - default - keep the default behavior
+# 1 - quiet - remove any specific log
+# 2 - compact - display only a summary of the information
+# 4 - full - display the complete information on a single long line
+# 8 - tree - display the complete information in an easier to read format
spanning several lines.
+
+LoadExtension =
"/usr/local/lib/x86_64-linux-gnu/freeDiameter/dbg_msg_dumps.fdx" : "0x8888";
+LoadExtension =
"/usr/local/lib/x86_64-linux-gnu/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "/usr/local/lib/x86_64-linux-gnu/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "/usr/local/lib/x86_64-linux-gnu/freeDiameter/dict_nasreq.fdx";
+LoadExtension =
"/usr/local/lib/x86_64-linux-gnu/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "/usr/local/lib/x86_64-linux-gnu/freeDiameter/dict_dcca.fdx";
+LoadExtension =
"/usr/local/lib/x86_64-linux-gnu/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+## Peers configuration
+
+# The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this
behavior (e.g., acl_wl).
+#
+# In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some
+# Diameter nodes and allow connections from these nodes.
+# This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+# No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+# No_TLS; # assume transparent security instead of TLS. DTLS is not
supported yet (will change in future versions).
+# Port = 5868; # The port to connect to
+# TcTimer = 30;
+# TwTimer = 30;
+# ConnectTo = "202.249.37.5";
+# ConnectTo = "2001:200:903:2::202:1";
+# TLS_Prio = "NORMAL";
+# Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP;
Port=3868; } ;
+ConnectPeer = "ttcn3ggsntest.localdomain" { ConnectTo = "172.18.3.202"; Port =
3868; No_TLS; TcTimer = 2; };
+
+
+##############################################################
diff --git a/ttcn3-ggsn-test/ogs/smfd.yaml b/ttcn3-ggsn-test/ogs/smfd.yaml
new file mode 100644
index 0000000..634cc9a
--- /dev/null
+++ b/ttcn3-ggsn-test/ogs/smfd.yaml
@@ -0,0 +1,520 @@
+#
+# logger:
+#
+# o Set OGS_LOG_INFO to all domain level
+# - If `level` is omitted, the default level is OGS_LOG_INFO)
+# - If `domain` is omitted, the all domain level is set from 'level'
+# (Nothing is needed)
+#
+# o Set OGS_LOG_ERROR to all domain level
+# - `level` can be set with none, fatal, error, warn, info, debug, trace
+# level: error
+#
+# o Set OGS_LOG_DEBUG to mme/emm domain level
+# level: debug
+# domain: mme,emm
+#
+# o Set OGS_LOG_TRACE to all domain level
+# level: trace
+# domain: core,pfcp,fd,pfcp,gtp,smf,event,tlv,mem,sock
+#
+logger:
+ file: /data/open5gs-smfd.log
+ level: info
+#
+# smf:
+#
+# <SBI Server>
+#
+# o SBI Server(http://<all address available>:80)
+# sbi:
+#
+# o SBI Server(http://<any address>:80)
+# sbi:
+# - addr:
+# - 0.0.0.0
+# - ::0
+# port: 7777
+#
+# o SBI Server(https://<all address avaiable>:443)
+# sbi:
+# - tls:
+# key: smf.key
+# pem: smf.pem
+#
+# o SBI Server(https://127.0.0.4:443, http://[::1]:80)
+# sbi:
+# - addr: 127.0.0.4
+# tls:
+# key: smf.key
+# pem: smf.pem
+# - addr: ::1
+#
+# o SBI Server(http://smf.open5gs.org:80)
+# sbi:
+# - name: smf.open5gs.org
+#
+# o SBI Server(http://127.0.0.4:7777)
+# sbi:
+# - addr: 127.0.0.4
+# port: 7777
+#
+# o SBI Server(http://<eth0 IP address>:80)
+# sbi:
+# - dev: eth0
+#
+# o Provide custom SBI address to be advertised to NRF
+# sbi:
+# - dev: eth0
+# advertise: open5gs-smf.svc.local
+#
+# sbi:
+# - addr: localhost
+# advertise:
+# - 127.0.0.99
+# - ::1
+#
+# <PFCP Server>
+#
+# o PFCP Server(127.0.0.4:8805, ::1:8805)
+# pfcp:
+# - addr: 127.0.0.4
+# - addr: ::1
+#
+# o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+# pfcp:
+# name: localhost
+#
+# <GTP-C Server>
+#
+# o GTP-C Server(127.0.0.4:2123, [fd69:f21d:873c:fa::3]:2123)
+# gtpc:
+# addr:
+# - 127.0.0.4
+# - fd69:f21d:873c:fa::3
+#
+# o On SMF, Same configuration
+# (127.0.0.4:2123, [fd69:f21d:873c:fa::3]:2123).
+# gtpc:
+# - addr: 127.0.0.4
+# - addr: fd69:f21d:873c:fa::3
+#
+# <GTP-U Server>>
+#
+# o GTP-U Server(127.0.0.4:2152, [::1]:2152)
+# gtpu:
+# - addr: 127.0.0.4
+# - addr: ::1
+#
+# o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+# gtpu:
+# name: localhost
+#
+# <Subnet for UE Pool>
+#
+# o IPv4 Pool
+# subnet:
+# addr: 10.45.0.1/16
+#
+# o IPv4/IPv6 Pool
+# subnet:
+# - addr: 10.45.0.1/16
+# - addr: 2001:db8:cafe::1/48
+#
+#
+# o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, 2001:db8:babe::1/48
+# ; If the UE has unknown DNN/APN(not internet/ims), SMF/UPF will crash.
+#
+# subnet:
+# - addr: 10.45.0.1/16
+# dnn: internet
+# - addr: 2001:db8:cafe::1/48
+# dnn: internet
+# - addr: 10.46.0.1/16
+# dnn: ims
+# - addr: 2001:db8:babe::1/48
+# dnn: ims
+#
+# o Specific DNN/APN with the FALLBACK SUBNET(10.47.0.1/16)
+# ; Note that put the FALLBACK SUBNET last to avoid SMF/UPF crash.
+#
+# subnet:
+# - addr: 10.45.0.1/16
+# dnn: internet
+# - addr: 10.46.0.1/16
+# dnn: ims
+# - addr: 10.50.0.1/16 ## FALLBACK SUBNET
+#
+# o Pool Range Sample
+# subnet:
+# - addr: 10.45.0.1/24
+# range: 10.45.0.100-10.45.0.200
+#
+# subnet:
+# - addr: 10.45.0.1/24
+# range:
+# - 10.45.0.5-10.45.0.50
+# - 10.45.0.100-
+#
+# subnet:
+# - addr: 10.45.0.1/24
+# range:
+# - -10.45.0.200
+# - 10.45.0.210-10.45.0.220
+#
+# subnet:
+# - addr: 10.45.0.1/16
+# range:
+# - 10.45.0.100-10.45.0.200
+# - 10.45.1.100-10.45.1.200
+# - addr: 2001:db8:cafe::1/48
+# range:
+# - 2001:db8:cafe:a0::0-2001:db8:cafe:b0::0
+# - 2001:db8:cafe:c0::0-2001:db8:cafe:d0::0
+#
+# <Domain Name Server>
+#
+# o Primary/Secondary can be configured. Others are ignored.
+#
+# dns:
+# - 8.8.8.8
+# - 8.8.4.4
+# - 2001:4860:4860::8888
+# - 2001:4860:4860::8844
+#
+# <MTU Size>
+#
+# o Provisioning a limit on the size of the packets sent by the MS
+# to avoid packet fragmentation in the backbone network
+# between the MS and the GGSN/PGW and/or across the (S)Gi reference point)
+# when some of the backbone links does not support
+# packets larger then 1500 octets
+#
+# <P-CSCF>
+#
+# o Proxy Call Session Control Function
+#
+# p-cscf:
+# - 127.0.0.1
+# - ::1
+#
+# <SMF Selection - 5G Core only>
+# 1. SMF sends SmfInfo(S-NSSAI, DNN, TAI) to the NRF
+# 2. NRF responds to AMF with SmfInfo during NF-Discovery.
+# 3. AMF selects SMF based on S-NSSAI, DNN and TAI in SmfInfo.
+#
+# Note that if there is no SmfInfo, any AMF can select this SMF.
+#
+# o S-NSSAI[SST:1] and DNN[internet] - At least 1 DNN is required in S-NSSAI
+# info:
+# - s_nssai:
+# - sst: 1
+# dnn:
+# - internet
+#
+# o S-NSSAI[SST:1 SD:009000] and DNN[internet or ims]
+# info:
+# - s_nssai:
+# - sst: 1
+# sd: 009000
+# dnn:
+# - internet
+# - ims
+#
+# o S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:90170 TAC:1]
+# info:
+# - s_nssai:
+# - sst: 1
+# dnn:
+# - internet
+# tai:
+# - plmn_id:
+# mcc: 901
+# mnc: 70
+# tac: 1
+#
+# o If any of conditions below are met:
+# - S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:90170 TAC:1-9]
+# - S-NSSAI[SST:2 SD:000080] and DNN[internet or ims]
+# - S-NSSAI[SST:4] and DNN[internet] and TAI[PLMN-ID:90170 TAC:10-20,30-40]
+#
+# info:
+# - s_nssai:
+# - sst: 1
+# dnn:
+# - internet
+# tai:
+# - plmn_id:
+# mcc: 901
+# mnc: 70
+# range:
+# - 1-9
+# - s_nssai:
+# - sst: 2
+# sd: 000080
+# dnn:
+# - internet
+# - ims
+# - s_nssai:
+# - sst: 4
+# dnn:
+# - internet
+# tai:
+# - plmn_id:
+# mcc: 901
+# mnc: 70
+# range:
+# - 10-20
+# - 30-40
+#
+# o Complex Example
+# info:
+# - s_nssai:
+# - sst: 1
+# dnn:
+# - internet
+# - sst: 1
+# sd: 000080
+# dnn:
+# - internet
+# - ims
+# - sst: 1
+# sd: 009000
+# dnn:
+# [internet, ims]
+# - sst: 2
+# dnn:
+# - internet
+# - sst: 3
+# sd: 123456
+# dnn:
+# - internet
+# tai:
+# - plmn_id:
+# mcc: 901
+# mnc: 70
+# tac: [1, 2, 3]
+# - plmn_id:
+# mcc: 901
+# mnc: 70
+# tac: 4
+# - plmn_id:
+# mcc: 901
+# mnc: 70
+# tac:
+# - 5
+# - 6
+# - plmn_id:
+# mcc: 901
+# mnc: 70
+# range:
+# - 100-200
+# - 300-400
+# - plmn_id:
+# mcc: 901
+# mnc: 70
+# range:
+# - 500-600
+# - 700-800
+# - 900-1000
+# - s_nssai:
+# - sst: 4
+# dnn:
+# - internet
+# tai:
+# - plmn_id:
+# mcc: 901
+# mnc: 70
+# tac: 99
+#
+
+smf:
+ sbi:
+ - addr: 172.18.3.201
+ port: 7777
+ pfcp:
+ - addr: 172.18.3.201
+ gtpc:
+ - addr: 172.18.3.201
+ gtpu:
+ - addr: 172.18.3.201
+ port: 2152
+ subnet:
+ - addr: 176.16.222.1/24
+ dns:
+ - 172.18.3.201
+ - 8.8.8.8
+ mtu: 1400
+ freeDiameter: /data/freediameter.conf
+
+#
+# nrf:
+#
+# <SBI Client>>
+#
+# o SBI Client(http://127.0.0.1:7777)
+# sbi:
+# addr: 127.0.0.10
+# port: 7777
+#
+# o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80)
+# sbi:
+# - addr: 127.0.0.10
+# tls:
+# key: nrf.key
+# pem: nrf.pem
+# - name: nrf.open5gs.org
+#
+# o SBI Client(http://[fd69:f21d:873c:fa::1]:80)
+# If prefer_ipv4 is true, http://127.0.0.10:80 is selected.
+#
+# sbi:
+# addr:
+# - 127.0.0.10
+# - fd69:f21d:873c:fa::1
+#
+nrf:
+ sbi:
+ - addr:
+ - 172.18.3.201
+ port: 7777
+
+#
+# upf:
+#
+# <PFCP Client>>
+#
+# o PFCP Client(127.0.0.7:8805)
+#
+# pfcp:
+# addr: 127.0.0.7
+#
+# <UPF Selection>
+#
+# o Round-Robin
+# (note that round robin can be disabled for a particular node
+# by setting flag 'rr' to 0)
+#
+# upf:
+# pfcp:
+# - addr: 127.0.0.7
+# - addr: 127.0.0.12
+# rr: 0
+# - addr: 127.0.0.19
+#
+# o UPF selection by eNodeB TAC
+# (either single TAC or multiple TACs, DECIMAL representation)
+#
+# upf:
+# pfcp:
+# - addr: 127.0.0.7
+# tac: 1
+# - addr: 127.0.0.12
+# tac: [3,5,8]
+#
+# o UPF selection by UE's DNN/APN (either single DNN/APN or multiple
DNNs/APNs)
+#
+# upf:
+# pfcp:
+# - addr: 127.0.0.7
+# dnn: ims
+# - addr: 127.0.0.12
+# dnn: [internet, web]
+#
+# o UPF selection by CellID(e_cell_id: 28bit, nr_cell_id: 36bit)
+# (either single enb_id or multiple enb_ids, HEX representation)
+#
+# upf:
+# pfcp:
+# - addr: 127.0.0.7
+# e_cell_id: 463
+# - addr: 127.0.0.12
+# nr_cell_id: [123456789, 9413]
+#
+upf:
+ pfcp:
+ - addr: 172.18.3.222
+
+#
+# parameter:
+#
+# o Number of output streams per SCTP associations.
+# sctp_streams: 30
+#
+# o Disable use of IPv4 addresses (only IPv6)
+# no_ipv4: true
+#
+# o Disable use of IPv6 addresses (only IPv4)
+# no_ipv6: true
+#
+# o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+# prefer_ipv4: true
+#
+# o Disable selection of UPF PFCP in Round-Robin manner
+# no_pfcp_rr_select: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+# ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+# gnb: 64
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+# To connect more UEs, you need to increase the size further.
+#
+# - Pool-size 128 => 65536 Number
+# - Pool-size 256 => 16384 Number
+# - Pool-size 512 => 4096 Number
+# - Pool-size 1024 => 1024 Number
+# - Pool-size 2048 => 512 Number
+# - Pool-size 8192 => 128 Number
+# - Pool-size 1024*1024 => 8 Number
+#
+# 128: 65536
+# 256: 16384
+# 512: 4096
+# 1024: 1024
+# 2048: 512
+# 8192: 128
+# big: 8
+#
+pool:
+
+#
+# time:
+#
+# o NF Instance Heartbeat (Default : 0)
+# NFs will not send heart-beat timer in NFProfile
+# NRF will send heart-beat timer in NFProfile
+#
+# o NF Instance Heartbeat (20 seconds)
+# NFs will send heart-beat timer (20 seconds) in NFProfile
+# NRF can change heart-beat timer in NFProfile
+#
+# nf_instance:
+# heartbeat: 20
+#
+# o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+# o Message Wait Duration (3000 ms)
+# message:
+# duration: 3000
+#
+# o Handover Wait Duration (Default : 300 ms)
+# Time to wait for SMF to send
+# PFCP Session Modification Request(Remove Indirect Tunnel) to the UPF
+# after sending Nsmf_PDUSession_UpdateSMContext Response(hoState:COMPLETED)
+#
+# o Handover Wait Duration (500ms)
+# handover:
+# duration: 500
+time:
diff --git a/ttcn3-ggsn-test/ogs/upfd-setup.sh
b/ttcn3-ggsn-test/ogs/upfd-setup.sh
new file mode 100755
index 0000000..7ab538d
--- /dev/null
+++ b/ttcn3-ggsn-test/ogs/upfd-setup.sh
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+if ! grep "ogstun" /proc/net/dev > /dev/null; then
+ ip tuntap add name ogstun mode tun
+fi
+ip addr del 176.16.222.1/16 dev ogstun 2> /dev/null
+ip addr add 176.16.222.1/16 dev ogstun
+#ip addr del cafe::1/64 dev ogstun 2> /dev/null
+#ip addr add cafe::1/64 dev ogstun
+ip link set ogstun up
diff --git a/ttcn3-ggsn-test/ogs/upfd.sh b/ttcn3-ggsn-test/ogs/upfd.sh
new file mode 100755
index 0000000..694df35
--- /dev/null
+++ b/ttcn3-ggsn-test/ogs/upfd.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+set -e
+set -x
+/data/upfd-setup.sh
+#du -lha / | grep freeDiameter
+su - osmocom -c "open5gs-upfd $*"
diff --git a/ttcn3-ggsn-test/ogs/upfd.yaml b/ttcn3-ggsn-test/ogs/upfd.yaml
new file mode 100644
index 0000000..35eeff7
--- /dev/null
+++ b/ttcn3-ggsn-test/ogs/upfd.yaml
@@ -0,0 +1,236 @@
+#
+# logger:
+#
+# o Set OGS_LOG_INFO to all domain level
+# - If `level` is omitted, the default level is OGS_LOG_INFO)
+# - If `domain` is omitted, the all domain level is set from 'level'
+# (Nothing is needed)
+#
+# o Set OGS_LOG_ERROR to all domain level
+# - `level` can be set with none, fatal, error, warn, info, debug, trace
+# level: error
+#
+# o Set OGS_LOG_DEBUG to mme/emm domain level
+# level: debug
+# domain: mme,emm
+#
+# o Set OGS_LOG_TRACE to all domain level
+# level: trace
+# domain: core,pfcp,gtp,upf,event,tlv,mem,sock
+#
+logger:
+ file: /data/open5gs-upfd.log
+ level: info
+
+#
+# upf:
+#
+# <PFCP Server>
+#
+# o PFCP Server(127.0.0.7:8805, ::1:8805)
+# pfcp:
+# - addr: 127.0.0.7
+# - addr: ::1
+#
+# o PFCP-U Server(127.0.0.1:2152, [::1]:2152)
+# pfcp:
+# name: localhost
+#
+# <GTP-U Server>>
+#
+# o GTP-U Server(127.0.0.7:2152, [::1]:2152)
+# gtpu:
+# - addr: 127.0.0.7
+# - addr: ::1
+#
+# o GTP-U Server(127.0.0.1:2152, [::1]:2152)
+# gtpu:
+# name: localhost
+#
+# o User Plane IP Resource information
+# gtpu:
+# - addr:
+# - 127.0.0.7
+# - ::1
+# teid_range_indication: 4
+# teid_range: 10
+# network_instance: internet
+# source_interface: 0
+# - addr: 127.0.10.4
+# teid_range_indication: 4
+# teid_range: 5
+# network_instance: ims
+# source_interface: 1
+#
+# o Provide custom UPF GTP-U address to be advertised inside NGAP messages
+# gtpu:
+# - addr: 10.4.128.21
+# advertise: 172.24.15.30
+#
+# gtpu:
+# - addr: 10.4.128.21
+# advertise:
+# - 127.0.0.1
+# - ::1
+#
+# gtpu:
+# - addr: 10.4.128.21
+# advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#
+# gtpu:
+# - dev: ens3
+# advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org
+#
+# <Subnet for UE network>
+#
+# Note that you need to setup your UE network using TUN device.
+# (ogstun, ogstun2, ogstunX, ..)
+#
+# o IPv4 Pool
+# $ sudo ip addr add 10.45.0.1/16 dev ogstun
+#
+# subnet:
+# addr: 10.45.0.1/16
+#
+# o IPv4/IPv6 Pool
+# $ sudo ip addr add 10.45.0.1/16 dev ogstun
+# $ sudo ip addr add 2001:db8:cafe::1/48 dev ogstun
+#
+# subnet:
+# - addr: 10.45.0.1/16
+# - addr: 2001:db8:cafe::1/48
+#
+#
+# o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, 2001:db8:babe::1/48
+# All other APNs use 10.45.0.1/16, 2001:db8:cafe::1/48
+# $ sudo ip addr add 10.45.0.1/16 dev ogstun
+# $ sudo ip addr add 10.46.0.1/16 dev ogstun
+# $ sudo ip addr add 2001:db8:cafe::1/48 dev ogstun
+# $ sudo ip addr add 2001:db8:babe::1/48 dev ogstun
+#
+# ; If the UE has unknown DNN/APN(not internet/ims), SMF/UPF will crash.
+#
+# subnet:
+# - addr: 10.45.0.1/16
+# dnn: internet
+# - addr: 2001:db8:cafe::1/48
+# dnn: internet
+# - addr: 10.46.0.1/16
+# dnn: ims
+# - addr: 2001:db8:babe::1/48
+# dnn: ims
+#
+# o Specific DNN/APN with the FALLBACK SUBNET(10.47.0.1/16)
+# ; Note that put the FALLBACK SUBNET last to avoid SMF/UPF crash.
+#
+# subnet:
+# - addr: 10.45.0.1/16
+# dnn: internet
+# - addr: 10.46.0.1/16
+# dnn: ims
+# - addr: 10.50.0.1/16 ## FALLBACK SUBNET
+#
+# o Multiple Devices (default: ogstun)
+# $ sudo ip addr add 10.45.0.1/16 dev ogstun
+# $ sudo ip addr add 2001:db8:cafe::1/48 dev ogstun2
+# $ sudo ip addr add 10.46.0.1/16 dev ogstun3
+# $ sudo ip addr add 2001:db8:babe::1/48 dev ogstun3
+#
+# subnet:
+# - addr: 10.45.0.1/16
+# dnn: internet
+# - addr: 2001:db8:cafe::1/48
+# dnn: internet
+# dev: ogstun2
+# - addr: 10.46.0.1/16
+# dnn: ims
+# dev: ogstun3
+# - addr: 2001:db8:babe::1/48
+# dnn: ims
+# dev: ogstun3
+#
+upf:
+ pfcp:
+ - addr: 172.18.3.222
+ gtpu:
+ - addr: 172.18.3.222
+ port: 2152
+ subnet:
+ - addr: 176.16.222.1/24
+ dnn: internet
+ dev: ogstun
+
+#
+# smf:
+#
+# <PFCP Client>>
+#
+# o PFCP Client(127.0.0.4:8805)
+#
+# pfcp:
+# addr: 127.0.0.4
+#
+smf:
+ pfcp:
+ - addr: 172.18.3.201
+
+#
+# parameter:
+#
+# o Number of output streams per SCTP associations.
+# sctp_streams: 30
+#
+# o Disable use of IPv4 addresses (only IPv6)
+# no_ipv4: true
+#
+# o Disable use of IPv6 addresses (only IPv4)
+# no_ipv6: true
+#
+# o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+# prefer_ipv4: true
+#
+parameter:
+
+#
+# max:
+#
+# o Maximum Number of UE per AMF/MME
+# ue: 1024
+# o Maximum Number of gNB/eNB per AMF/MME
+# gnb: 64
+#
+max:
+
+#
+# pool:
+#
+# o The default memory pool size was set assuming 1024 UEs.
+# To connect more UEs, you need to increase the size further.
+#
+# - Pool-size 128 => 65536 Number
+# - Pool-size 256 => 16384 Number
+# - Pool-size 512 => 4096 Number
+# - Pool-size 1024 => 1024 Number
+# - Pool-size 2048 => 512 Number
+# - Pool-size 8192 => 128 Number
+# - Pool-size 1024*1024 => 8 Number
+#
+# 128: 65536
+# 256: 16384
+# 512: 4096
+# 1024: 1024
+# 2048: 512
+# 8192: 128
+# big: 8
+#
+pool:
+
+#
+# time:
+#
+# o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+#
+# o Message Wait Duration (3000 ms)
+# message:
+# duration: 3000
+time:
--
To view, visit https://gerrit.osmocom.org/c/docker-playground/+/27063
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-Change-Id: Ia6c122fce951d369a5d2362cbe99d10d61c15f49
Gerrit-Change-Number: 27063
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pes...@sysmocom.de>
Gerrit-MessageType: newchange
