laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bsc/+/27629 )
Change subject: doc/examples: add a multi-trx config config example ...................................................................... doc/examples: add a multi-trx config config example So far we had no multi-trx config examples at all. Let's add one. Use unique 'RSL TEI' for each TRX, as this simplifies analyzing the Abis protocol traces. Also use the new 'TCH/F_TCH/H_SDCCH8_PDCH'. Change-Id: I20f86fa74dc4bd71538627ec59c5d2cd3678a089 Fixes: OS#4748 --- A doc/examples/osmo-bsc/osmo-bsc-4trx.cfg 1 file changed, 161 insertions(+), 0 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/doc/examples/osmo-bsc/osmo-bsc-4trx.cfg b/doc/examples/osmo-bsc/osmo-bsc-4trx.cfg new file mode 100644 index 0000000..68d6a38 --- /dev/null +++ b/doc/examples/osmo-bsc/osmo-bsc-4trx.cfg @@ -0,0 +1,161 @@ +! osmo-bsc configuration example with 4 TRX +e1_input + e1_line 0 driver ipa +network + network country code 1 + mobile network code 1 + encryption a5 0 + neci 1 + paging any use tch 0 + bts 0 + type osmo-bts + band DCS1800 + cell_identity 6969 + location_area_code 1 + base_station_id_code 63 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + radio-link-timeout 32 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + channel-description attach 1 + channel-description bs-pa-mfrms 5 + channel-description bs-ag-blks-res 1 + early-classmark-sending forbidden + ipa unit-id 6969 0 + oml ipa stream-id 255 line 0 + codec-support fr hr amr + gprs mode none + trx 0 + rf_locked 0 + arfcn 871 + nominal power 23 + ! to use full TRX power, set max_power_red 0 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH + hopping enabled 0 + timeslot 1 + phys_chan_config SDCCH8+CBCH + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 6 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + trx 1 + rf_locked 0 + arfcn 873 + nominal power 23 + ! to use full TRX power, set max_power_red 0 + max_power_red 20 + rsl e1 tei 1 + timeslot 0 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 6 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + trx 2 + rf_locked 0 + arfcn 875 + nominal power 23 + ! to use full TRX power, set max_power_red 0 + max_power_red 20 + rsl e1 tei 2 + timeslot 0 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 6 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + trx 3 + rf_locked 0 + arfcn 877 + nominal power 23 + ! to use full TRX power, set max_power_red 0 + max_power_red 20 + rsl e1 tei 3 + timeslot 0 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 6 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH + hopping enabled 0 +msc 0 + allow-emergency allow + mgw remote-ip 127.0.0.1 + mgw remote-port 2427 + mgw local-port 2727 +bsc + mid-call-timeout 0 -- To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/27629 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-Change-Id: I20f86fa74dc4bd71538627ec59c5d2cd3678a089 Gerrit-Change-Number: 27629 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <[email protected]> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <[email protected]> Gerrit-Reviewer: pespin <[email protected]> Gerrit-MessageType: merged
