neels has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-msc/+/28049 )
Change subject: fix crash on CM Serv Rej: fix use count mismatch
......................................................................
fix crash on CM Serv Rej: fix use count mismatch
With comments, clarify the code paths where a CM Service use count has
not yet been placed on the conn (just send CM Service Reject) and where
the use count is placed (decrement count on CM Service Reject).
Place the CM Service use count slightly earlier:
- it is then correctly present when checking the mobile identity in
cm_serv_reuse_conn(), avoiding the crash reported in OS#5532.
- there is only one place incrementing the use count instead of two.
Related: OS#5532
Change-Id: I6c735b79b67108bcaadada3f01c7046e262f939b
---
M src/libmsc/gsm_04_08.c
M src/libmsc/msc_a.c
M tests/msc_vlr/msc_vlr_test_reject_concurrency.err
3 files changed, 24 insertions(+), 7 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-msc refs/changes/49/28049/1
diff --git a/src/libmsc/gsm_04_08.c b/src/libmsc/gsm_04_08.c
index b5d46fd..9d3b5a2 100644
--- a/src/libmsc/gsm_04_08.c
+++ b/src/libmsc/gsm_04_08.c
@@ -246,7 +246,9 @@
return msc_a_tx_dtap_to_i(msc_a, msg);
}
-/* 9.2.6 CM service reject */
+/* 9.2.6 CM service reject.
+ * For an active and valid CM Service Request, instead use
msc_vlr_tx_cm_serv_rej(), which also takes care of
+ * decrementing the use token for that service type. */
static int msc_gsm48_tx_mm_serv_rej(struct msc_a *msc_a,
enum gsm48_reject_value value)
{
@@ -701,7 +703,6 @@
accept_reuse:
LOG_MSC_A_CAT(msc_a, DMM, LOGL_DEBUG, "re-using already accepted
connection\n");
- msc_a_get(msc_a, msc_a_cm_service_type_to_use(cm_serv_type));
msub_update_id(msc_a->c.msub);
return net->vlr->ops.tx_cm_serv_acc(msc_a, cm_serv_type);
}
@@ -729,6 +730,14 @@
struct osmo_mobile_identity mi;
int rc;
+ /* There are two ways to respond with a CM Service Reject:
+ * Directly and only send the CM Service Reject with
msc_gsm48_tx_mm_serv_rej().
+ * Decrement the CM Service use count token and send the message with
msc_vlr_tx_cm_serv_rej().
+ *
+ * Until we accept the CM Service Request message as such, there is no
use count placed for the service type.
+ * So in here use msc_gsm48_tx_mm_serv_rej() to respond.
+ */
+
/* Make sure that both header and CM Service Request fit into the
buffer */
if (msgb_l3len(msg) < sizeof(*gh) + sizeof(*req)) {
LOG_MSC_A(msc_a, LOGL_ERROR, "Rx CM SERVICE REQUEST: wrong
message size (%u < %zu)\n",
@@ -791,13 +800,16 @@
if (!msc_a_cm_service_type_to_use(req->cm_service_type))
return msc_gsm48_tx_mm_serv_rej(msc_a,
GSM48_REJECT_SRV_OPT_NOT_SUPPORTED);
+ /* At this point, the CM Service Request message is being accepted.
+ * Increment the matching use token, and from here on use
msc_vlr_tx_cm_serv_rej() to respond in case of
+ * failure. */
+ msc_a_get(msc_a, msc_a_cm_service_type_to_use(req->cm_service_type));
+
if (msc_a_is_accepted(msc_a))
return cm_serv_reuse_conn(msc_a, &mi, req->cm_service_type);
osmo_signal_dispatch(SS_SUBSCR, S_SUBSCR_IDENTITY, &mi);
- msc_a_get(msc_a, msc_a_cm_service_type_to_use(req->cm_service_type));
-
is_utran = (msc_a->c.ran->type == OSMO_RAT_UTRAN_IU);
vlr_proc_acc_req(msc_a->c.fi,
MSC_A_EV_AUTHENTICATED, MSC_A_EV_CN_CLOSE, NULL,
@@ -1508,7 +1520,8 @@
return gsm48_tx_mm_info(msc_a);
}
-/* VLR asks us to transmit a CM Service Reject */
+/* VLR asks us to transmit a CM Service Reject.
+ * Decrement the CM Service type's use token and send the CM Service Reject
message. */
static int msc_vlr_tx_cm_serv_rej(void *msc_conn_ref, enum
osmo_cm_service_type cm_service_type,
enum gsm48_reject_value cause)
{
diff --git a/src/libmsc/msc_a.c b/src/libmsc/msc_a.c
index e2bf975..5761ed7 100644
--- a/src/libmsc/msc_a.c
+++ b/src/libmsc/msc_a.c
@@ -1792,6 +1792,10 @@
return msc_a_start_assignment(msc_a, cc_trans);
}
+/* Map CM Service type to use token.
+ * Given a CM Service type, return a matching token intended for
osmo_use_count.
+ * For unknown service type, return NULL.
+ */
const char *msc_a_cm_service_type_to_use(enum osmo_cm_service_type
cm_service_type)
{
switch (cm_service_type) {
diff --git a/tests/msc_vlr/msc_vlr_test_reject_concurrency.err
b/tests/msc_vlr/msc_vlr_test_reject_concurrency.err
index 67b4819..25ccdfb 100644
--- a/tests/msc_vlr/msc_vlr_test_reject_concurrency.err
+++ b/tests/msc_vlr/msc_vlr_test_reject_concurrency.err
@@ -1032,8 +1032,8 @@
DBSSAP
msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
RAN decode: DTAP
DRLL
msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
Dispatching 04.08 message: MM GSM48_MT_MM_CM_SERV_REQ
DMM
msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}: Rx
CM SERVICE REQUEST cm_service_type=Short-Messaging-Service
-DMM
msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
re-using already accepted connection
DREF
msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}: +
cm_service_sms: now used by 3 (2*cm_service_sms,rx_from_ms)
+DMM
msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
re-using already accepted connection
DBSSAP
msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
Sending DTAP: MM GSM48_MT_MM_CM_SERV_ACC
DMSC
msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
RAN encode: DTAP on GERAN-A
- DTAP --GERAN-A--> MS: GSM48_MT_MM_CM_SERV_ACC: 0521
@@ -1842,8 +1842,8 @@
DBSSAP
msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:PAGING_RESP){MSC_A_ST_AUTHENTICATED}:
RAN decode: DTAP
DRLL
msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:PAGING_RESP){MSC_A_ST_AUTHENTICATED}:
Dispatching 04.08 message: MM GSM48_MT_MM_CM_SERV_REQ
DMM
msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}: Rx
CM SERVICE REQUEST cm_service_type=Short-Messaging-Service
-DMM
msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
re-using already accepted connection
DREF
msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}: +
cm_service_sms: now used by 3 (sms,rx_from_ms,cm_service_sms)
+DMM
msc_a(IMSI-901700000004620:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
re-using already accepted connection
DBSSAP
msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
Sending DTAP: MM GSM48_MT_MM_CM_SERV_ACC
DMSC
msc_a(IMSI-901700000004620:MSISDN-46071:GERAN-A:CM_SERVICE_REQ){MSC_A_ST_AUTHENTICATED}:
RAN encode: DTAP on GERAN-A
- DTAP --GERAN-A--> MS: GSM48_MT_MM_CM_SERV_ACC: 0521
--
To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/28049
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-msc
Gerrit-Branch: master
Gerrit-Change-Id: I6c735b79b67108bcaadada3f01c7046e262f939b
Gerrit-Change-Number: 28049
Gerrit-PatchSet: 1
Gerrit-Owner: neels <[email protected]>
Gerrit-MessageType: newchange
