laforge has uploaded this change for review. (
https://gerrit.osmocom.org/c/simtrace2/+/28330 )
Change subject: HACK: dump enabled interrupts and priorities during startup
......................................................................
HACK: dump enabled interrupts and priorities during startup
Change-Id: I6a19aaa8674fa510e4e346cd14a3545f7bfcc838
---
M firmware/libcommon/source/mode_cardemu.c
1 file changed, 32 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/30/28330/1
diff --git a/firmware/libcommon/source/mode_cardemu.c
b/firmware/libcommon/source/mode_cardemu.c
index 7f52647..694377a 100644
--- a/firmware/libcommon/source/mode_cardemu.c
+++ b/firmware/libcommon/source/mode_cardemu.c
@@ -584,6 +584,35 @@
TRACE_ENTRY();
}
+struct relevant_irq {
+ uint32_t irq;
+ uint32_t prio;
+ const char *name;
+};
+static const struct relevant_irq relevant_irqs[] = {
+ { UDP_IRQn, 14, "USB" },
+ { CONSOLE_IRQ, 15, "CONSOLE" },
+ { FIRST_USART_IRQ, 0, "7816_0" },
+#ifdef CARDEMU_SECOND_UART
+ { USART0_IRQn, 0, "7816_1" },
+#endif
+#ifdef DETECT_VCC_BY_ADC
+ { ADC_IRQn, 13, "ADC" },
+#endif
+ { PIOA_IRQn, 10, "PIOA" },
+ { PIOB_IRQn, 10, "PIOB" },
+ { PIOC_IRQn, 10, "PIOC" },
+};
+void dump_irq_prios(void)
+{
+ printf("Interrupt Enable Mask (ISER): %08x%08x\n\r", NVIC->ISER[1],
NVIC->ISER[0]);
+ for (unsigned int i = 0; i < ARRAY_SIZE(relevant_irqs); i++) {
+ const struct relevant_irq *ri = &relevant_irqs[i];
+ printf("IRQ prio %02u (%s): current=%u, expected=%u\r\n",
ri->irq, ri->name,
+ NVIC_GetPriority(ri->irq), ri->prio);
+ }
+}
+
/* called if config is activated */
void mode_cardemu_init(void)
{
@@ -653,6 +682,9 @@
sim_switch_use_physical(1, 1);
/* TODO check RST and VCC */
#endif /* CARDEMU_SECOND_UART */
+
+ dump_irq_prios();
+
}
/* called if config is deactivated */
--
To view, visit https://gerrit.osmocom.org/c/simtrace2/+/28330
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: simtrace2
Gerrit-Branch: master
Gerrit-Change-Id: I6a19aaa8674fa510e4e346cd14a3545f7bfcc838
Gerrit-Change-Number: 28330
Gerrit-PatchSet: 1
Gerrit-Owner: laforge <[email protected]>
Gerrit-MessageType: newchange
