osmith has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-bsc/+/33676 )
Change subject: Fix various typos
......................................................................
Fix various typos
Change-Id: I2726f18156f96999159f7b5f7c6c5a2d93667131
---
M src/osmo-bsc/a_reset.c
M src/osmo-bsc/abis_rsl.c
M src/osmo-bsc/assignment_fsm.c
M src/osmo-bsc/bsc_subscr_conn_fsm.c
M src/osmo-bsc/bts.c
M src/osmo-bsc/bts_nokia_site.c
M src/osmo-bsc/bts_vty.c
M src/osmo-bsc/chan_alloc.c
M src/osmo-bsc/lcs_ta_req.c
M src/osmo-bsc/neighbor_ident_vty.c
M src/osmo-bsc/nm_bts_fsm.c
M src/osmo-bsc/osmo_bsc_main.c
M src/osmo-bsc/paging.c
M src/utils/meas_udp2db.c
14 files changed, 31 insertions(+), 22 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/76/33676/1
diff --git a/src/osmo-bsc/a_reset.c b/src/osmo-bsc/a_reset.c
index d23ffa7..c2c89e3 100644
--- a/src/osmo-bsc/a_reset.c
+++ b/src/osmo-bsc/a_reset.c
@@ -42,7 +42,7 @@
static void a_reset_link_up(void *data)
{
struct bsc_msc_data *msc = data;
- LOGP(DMSC, LOGL_NOTICE, "(msc%d) BSSMAP assocation is up\n", msc->nr);
+ LOGP(DMSC, LOGL_NOTICE, "(msc%d) BSSMAP association is up\n", msc->nr);
osmo_stat_item_inc(osmo_stat_item_group_get_item(msc->msc_statg,
MSC_STAT_MSC_LINKS_ACTIVE), 1);
osmo_stat_item_inc(osmo_stat_item_group_get_item(msc->network->bsc_statg,
BSC_STAT_NUM_MSC_CONNECTED), 1);
osmo_signal_dispatch(SS_MSC, S_MSC_CONNECTED, msc);
@@ -51,7 +51,7 @@
static void a_reset_link_lost(void *data)
{
struct bsc_msc_data *msc = data;
- LOGP(DMSC, LOGL_NOTICE, "(msc%d) BSSMAP assocation is down\n", msc->nr);
+ LOGP(DMSC, LOGL_NOTICE, "(msc%d) BSSMAP association is down\n",
msc->nr);
osmo_stat_item_dec(osmo_stat_item_group_get_item(msc->msc_statg,
MSC_STAT_MSC_LINKS_ACTIVE), 1);
osmo_stat_item_dec(osmo_stat_item_group_get_item(msc->network->bsc_statg,
BSC_STAT_NUM_MSC_CONNECTED), 1);
osmo_signal_dispatch(SS_MSC, S_MSC_LOST, msc);
diff --git a/src/osmo-bsc/abis_rsl.c b/src/osmo-bsc/abis_rsl.c
index 54357de..0c3be1a 100644
--- a/src/osmo-bsc/abis_rsl.c
+++ b/src/osmo-bsc/abis_rsl.c
@@ -1996,12 +1996,12 @@
return false;
}
- /* No free TCH/F or TCH/H was found, we now select one of the busy
lchans and initate a release on that lchan.
- * This will take a short amount of time. We need to come back and
check regulary to see if we managed to
+ /* No free TCH/F or TCH/H was found, we now select one of the busy
lchans and initiate a release on that lchan.
+ * This will take a short amount of time. We need to come back and
check regularly to see if we managed to
* free up another lchan. */
if (!rqd->release_lchan) {
struct gsm_lchan *release_lchan;
- /* Pick any busy TCH/F or TCH/H lchan and inititate a channel
+ /* Pick any busy TCH/F or TCH/H lchan and initiate a channel
* release to make room for the incoming emergency call */
rqd->release_lchan = release_lchan = get_any_lchan(rqd->bts);
if (!release_lchan) {
diff --git a/src/osmo-bsc/assignment_fsm.c b/src/osmo-bsc/assignment_fsm.c
index 02ca29c..d58bca2 100644
--- a/src/osmo-bsc/assignment_fsm.c
+++ b/src/osmo-bsc/assignment_fsm.c
@@ -222,7 +222,7 @@
}
}
- /* Only AoIP networks include a speech codec (choosen) in the
+ /* Only AoIP networks include a speech codec (chosen) in the
* assignment complete message. */
if (gscon_is_aoip(conn)) {
/* Extrapolate speech codec from speech mode */
diff --git a/src/osmo-bsc/bsc_subscr_conn_fsm.c
b/src/osmo-bsc/bsc_subscr_conn_fsm.c
index 6300ca6..c84e6c9 100644
--- a/src/osmo-bsc/bsc_subscr_conn_fsm.c
+++ b/src/osmo-bsc/bsc_subscr_conn_fsm.c
@@ -80,7 +80,7 @@
{GSCON_EV_MO_COMPL_L3, "MO_COMPL_L3"},
{GSCON_EV_A_CONN_CFM, "MO-CONNECT.cfm"},
{GSCON_EV_A_CLEAR_CMD, "CLEAR_CMD"},
- {GSCON_EV_A_DISC_IND, "DISCONNET.ind"},
+ {GSCON_EV_A_DISC_IND, "DISCONNECT.ind"},
{GSCON_EV_A_COMMON_ID_IND, "COMMON_ID.ind"},
{GSCON_EV_ASSIGNMENT_START, "ASSIGNMENT_START"},
{GSCON_EV_ASSIGNMENT_END, "ASSIGNMENT_END"},
diff --git a/src/osmo-bsc/bts.c b/src/osmo-bsc/bts.c
index 0292386..bd61501 100644
--- a/src/osmo-bsc/bts.c
+++ b/src/osmo-bsc/bts.c
@@ -1014,7 +1014,7 @@
switch (ts->pchan_is) {
/* Not allowed on CCCH/BCCH */
case GSM_PCHAN_CCCH:
- /* Preceeding timeslot shall not exceed 2 dB */
+ /* Preceding timeslot shall not exceed 2 dB */
if (prev->c0_max_power_red_db > 0)
prev->c0_max_power_red_db = 2;
/* fall-through */
diff --git a/src/osmo-bsc/bts_nokia_site.c b/src/osmo-bsc/bts_nokia_site.c
index 2028009..dc8ff14 100644
--- a/src/osmo-bsc/bts_nokia_site.c
+++ b/src/osmo-bsc/bts_nokia_site.c
@@ -1338,7 +1338,7 @@
GET_NEXT_BYTE;
- /* encoding bit, construced means that other elements are
contained */
+ /* encoding bit, constructed means that other elements are
contained */
constructed = ((ub & 0x20) ? 1 : 0);
if ((ub & 0x1F) == 0x1F) {
@@ -1397,7 +1397,7 @@
GET_NEXT_BYTE;
- /* encoding bit, construced means that other elements are
contained */
+ /* encoding bit, constructed means that other elements are
contained */
constructed = ((ub & 0x20) ? 1 : 0);
if ((ub & 0x1F) == 0x1F) {
diff --git a/src/osmo-bsc/bts_vty.c b/src/osmo-bsc/bts_vty.c
index 657d03e..5110659 100644
--- a/src/osmo-bsc/bts_vty.c
+++ b/src/osmo-bsc/bts_vty.c
@@ -4242,7 +4242,7 @@
vty_out(vty, "auto%s", VTY_NEWLINE);
}
-/* TODO: generalize and move indention handling to libosmocore */
+/* TODO: generalize and move indentation handling to libosmocore */
#define cfg_out(fmt, args...) \
vty_out(vty, "%*s" fmt, indent, "", ##args);
diff --git a/src/osmo-bsc/chan_alloc.c b/src/osmo-bsc/chan_alloc.c
index 4fbf8be..cc8da3d 100644
--- a/src/osmo-bsc/chan_alloc.c
+++ b/src/osmo-bsc/chan_alloc.c
@@ -63,7 +63,7 @@
if (!nm_is_running(&ts->mo.nm_state))
continue;
- /* A dynamic timeslot currently in PDCH mode are
available as TCH or SDCCH8, beause they can be switched
+ /* A dynamic timeslot currently in PDCH mode are
available as TCH or SDCCH8, because they can be switched
* to TCH or SDCCH mode at any moment. Count
TCH/F_TCH/H_SDCCH8_PDCH as one total timeslot, even though it may
* be switched to TCH/H and would then count as two --
hence opt for pessimistic load. */
if ((ts->pchan_on_init == GSM_PCHAN_OSMO_DYN ||
diff --git a/src/osmo-bsc/lcs_ta_req.c b/src/osmo-bsc/lcs_ta_req.c
index f0bb02e..a1fa873 100644
--- a/src/osmo-bsc/lcs_ta_req.c
+++ b/src/osmo-bsc/lcs_ta_req.c
@@ -89,7 +89,7 @@
struct lcs_ta_req *lcs_ta_req;
if (lcs_loc_req->ta_req) {
LOG_LCS_TA_REQ(lcs_loc_req->ta_req, LOGL_ERROR,
- "Cannot start anoter TA Request FSM, this TA
Request is still active\n");
+ "Cannot start another TA Request FSM, this TA
Request is still active\n");
return -ENOTSUP;
}
lcs_ta_req = lcs_ta_req_alloc(lcs_loc_req->fi,
LCS_LOC_REQ_EV_TA_REQ_END);
diff --git a/src/osmo-bsc/neighbor_ident_vty.c
b/src/osmo-bsc/neighbor_ident_vty.c
index 7e58e37..44b9057 100644
--- a/src/osmo-bsc/neighbor_ident_vty.c
+++ b/src/osmo-bsc/neighbor_ident_vty.c
@@ -494,7 +494,7 @@
{
vty_out(vty, "%% Warning: The CTRL interface for Neighbor Address
Resolution is now deprecated."
"Upgrade osmo-pcu and drop the 'neighbor-resolution bind "
VTY_IPV46_CMD " [<0-65535>]' VTY "
- "option in order to let osmo-pcu use the new resoluton method
using the PCUIF over IPA "
+ "option in order to let osmo-pcu use the new resolution method
using the PCUIF over IPA "
"multiplex, which will work out of the box without required
configuration.%s", VTY_NEWLINE);
osmo_talloc_replace_string(bsc_gsmnet, &bsc_gsmnet->neigh_ctrl.addr,
argv[0]);
if (argc > 1)
diff --git a/src/osmo-bsc/nm_bts_fsm.c b/src/osmo-bsc/nm_bts_fsm.c
index dd05f9a..e601e18 100644
--- a/src/osmo-bsc/nm_bts_fsm.c
+++ b/src/osmo-bsc/nm_bts_fsm.c
@@ -122,7 +122,7 @@
bts->bts_nr, 0xff, 0xff,
NM_STATE_UNLOCKED);
/* Message containing BTS attributes, including the
interference band bounds, was ACKed by the BTS.
- * Store the sent bounds as the ones being used for logging and
comparing intereference levels. */
+ * Store the sent bounds as the ones being used for logging and
comparing interference levels. */
bts->interf_meas_params_used = bts->interf_meas_params_cfg;
}
diff --git a/src/osmo-bsc/osmo_bsc_main.c b/src/osmo-bsc/osmo_bsc_main.c
index 0757da0..ff73ebc 100644
--- a/src/osmo-bsc/osmo_bsc_main.c
+++ b/src/osmo-bsc/osmo_bsc_main.c
@@ -870,7 +870,7 @@
struct mgcp_client *mgcp_client_single;
unsigned int pool_members_initalized;
- /* Initialize MGW pool. This initalizes and connects all MGCP clients
that are currently configured in
+ /* Initialize MGW pool. This initializes and connects all MGCP clients
that are currently configured in
* the pool. Adding additional MGCP clients to the pool is possible but
the user has to configure and
* (re)connect them manually from the VTY. */
if (!mgcp_client_pool_empty(bsc_gsmnet->mgw.mgw_pool)) {
@@ -890,7 +890,7 @@
LOGP(DNM, LOGL_NOTICE, "No MGW pool configured, using MGW configuration
in VTY node 'msc'\n");
mgcp_client_single = mgcp_client_init(bsc_gsmnet, bsc_gsmnet->mgw.conf);
if (!mgcp_client_single) {
- LOGP(DNM, LOGL_ERROR, "MGW (single) client initalization
failed\n");
+ LOGP(DNM, LOGL_ERROR, "MGW (single) client initialization
failed\n");
return -EINVAL;
}
if (mgcp_client_connect(mgcp_client_single)) {
diff --git a/src/osmo-bsc/paging.c b/src/osmo-bsc/paging.c
index 1cee164..b7842dd 100644
--- a/src/osmo-bsc/paging.c
+++ b/src/osmo-bsc/paging.c
@@ -73,8 +73,8 @@
.tv_nsec = 500 * 1000 * 1000,
};
-/* If no CCCH Lod Ind is received before this time period, the BTS is
considered
- * to have stopped sending CCCH Load Indication, probaby due to being under
Load
+/* If no CCCH Load Ind is received before this time period, the BTS is
considered
+ * to have stopped sending CCCH Load Indication, probably due to being under
Load
* Threshold: */
#define bts_no_ccch_load_ind_timeout_sec(bts) ((bts)->ccch_load_ind_period * 2)
@@ -361,7 +361,7 @@
* coming from abis_rsl.c
*
* We attempt to iterate once over the list of items but
- * only upto available_slots.
+ * only up to available_slots.
*/
static void paging_handle_pending_requests(struct gsm_bts_paging_state
*paging_bts)
{
@@ -562,7 +562,7 @@
} else if (bts_entry->initial_req_list_len == 1) {
/* Worker timer is armed -> there was already one req before
* bts_entry->initial_req_list_len == 1 -> There were no
initial requests
- * in the list, aka the timer is waiting for
retransmition,
+ * in the list, aka the timer is waiting for
retransmission,
* which is a longer period.
* Let's recaculate the time to adapt it to initial_period: */
struct timespec now, elapsed, tdiff;
diff --git a/src/utils/meas_udp2db.c b/src/utils/meas_udp2db.c
index f40f137..0c97d8b 100644
--- a/src/utils/meas_udp2db.c
+++ b/src/utils/meas_udp2db.c
@@ -1,4 +1,4 @@
-/* liesten to meas_feed on UDP and write it to sqlite3 database */
+/* listen to meas_feed on UDP and write it to sqlite3 database */
/* (C) 2012 by Harald Welte <[email protected]>
*
--
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/33676
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I2726f18156f96999159f7b5f7c6c5a2d93667131
Gerrit-Change-Number: 33676
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <[email protected]>
Gerrit-MessageType: newchange
