laforge has submitted this change. (
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33720 )
Change subject: MGW_Tests: Add test for "confecho" connection.
......................................................................
MGW_Tests: Add test for "confecho" connection.
The test uses two connections: "confecho" and "sendonly". It is expected
that "confecho" connection receives as many RTP packets as it sends,
because it echoes back its packets. It is also expected that "sendonly"
connection receives the same amount of RTP packets.
Change-Id: I7df4a58ad9287a564b2daf7548b882c03787f7f2
---
M mgw/MGCP_Test.ttcn
1 file changed, 67 insertions(+), 0 deletions(-)
Approvals:
laforge: Looks good to me, approved
pespin: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/mgw/MGCP_Test.ttcn b/mgw/MGCP_Test.ttcn
index 7d01b97..73591b2 100644
--- a/mgw/MGCP_Test.ttcn
+++ b/mgw/MGCP_Test.ttcn
@@ -2283,6 +2283,58 @@
setverdict(pass);
}
+ testcase TC_two_crcx_confecho_sendonly_rtp() runs on dummy_CT {
+ var RtpFlowData flow[2];
+ var MgcpEndpoint ep := c_mgw_ep_rtpbridge & "2@" & c_mgw_domain;
+ var MgcpCallId call_id := '1225'H;
+ var RtpemStats stats[2];
+
+ f_init(ep);
+
+ /* "Talker" is sending to MGW and receives echo. */
+ flow[0] := valueof(t_RtpFlow(mp_local_ipv4, mp_remote_ipv4,
112, "GSM-HR-08/8000/1"));
+ flow[0].em.portnr := 10000;
+ f_flow_create(RTPEM[0], ep, call_id, "confecho", flow[0]);
+
+ /* "Listener" receives from MGW. */
+ flow[1] := valueof(t_RtpFlow(mp_local_ipv4, mp_remote_ipv4,
112, "GSM-HR-08/8000/1"));
+ flow[1].em.portnr := 20000;
+ f_flow_create(RTPEM[1], ep, call_id, "sendonly", flow[1]);
+
+
+ f_rtpem_mode(RTPEM[0], RTPEM_MODE_BIDIR);
+ f_rtpem_mode(RTPEM[1], RTPEM_MODE_BIDIR);
+ f_sleep(1.0);
+ f_flow_delete(RTPEM[0]);
+ f_flow_delete(RTPEM[1], ep, call_id);
+
+ stats[0] := f_rtpem_stats_get(RTPEM[0]);
+ stats[1] := f_rtpem_stats_get(RTPEM[1]);
+
+ /* The "Talker" will receive his RTP, so TX must match RX.
+ * As RTP from "Listener" is ignored, no extra packets shall be
received. */
+ if (stats[0].num_pkts_tx != stats[0].num_pkts_rx) {
+ setverdict(fail, "Talker does not receive as many
packets as it transmits!");
+ }
+ if (stats[0].bytes_payload_tx != stats[0].bytes_payload_rx) {
+ setverdict(fail, "Talker does not receive as many
payload as it transmits!");
+ }
+
+ /* The "Listener" will also receive RTP of the "Talker",
+ * so TX of "Talker" must match RX of "Listener". */
+ if (stats[0].num_pkts_tx != stats[1].num_pkts_rx) {
+ setverdict(fail, "Listener does not receive as many
packets as talker transmits!");
+ }
+ if (stats[0].bytes_payload_tx != stats[1].bytes_payload_rx) {
+ setverdict(fail, "Listener does not receive as many
payload as talker transmits!");
+ }
+
+ f_rtpem_stats_err_check(stats[0]);
+ f_rtpem_stats_err_check(stats[1]);
+
+ setverdict(pass);
+ }
+
/* create two local RTP emulations; create two connections on MGW EP,
see if
* exchanged data is converted between ts101318 and rfc5993 */
@@ -3081,6 +3133,7 @@
execute(TC_two_crcx_mdcx_and_rtp());
execute(TC_two_crcx_and_unsolicited_rtp());
execute(TC_two_crcx_and_one_mdcx_rtp_ho());
+ execute(TC_two_crcx_confecho_sendonly_rtp());
execute(TC_ts101318_rfc5993_rtp_conversion());
execute(TC_ts101318_rfc5993_rtp_conversion_fmtp());
execute(TC_amr_oa_bwe_rtp_conversion());
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/33720
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I7df4a58ad9287a564b2daf7548b882c03787f7f2
Gerrit-Change-Number: 33720
Gerrit-PatchSet: 4
Gerrit-Owner: jolly <[email protected]>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: dexter <[email protected]>
Gerrit-Reviewer: laforge <[email protected]>
Gerrit-Reviewer: pespin <[email protected]>
Gerrit-MessageType: merged
