osmith has uploaded this change for review. ( https://gerrit.osmocom.org/c/docker-playground/+/36389?usp=email )
Change subject: ttcn3-bts-test: add env var to not run all configs ...................................................................... ttcn3-bts-test: add env var to not run all configs Make it possible to e.g. run only one of the generic/oml/hopping configurations. I made a version of this patch a few weeks ago for testing OS#6375, and I'm submitting it now so I can add multiple configurations for ttcn3-ggsn-test in the next patch with the same logic. Change-Id: I1dce5e6aa4b5d67f9f8c96ced611ab2875c353c8 --- M README.md M jenkins-common.sh M ttcn3-bts-test/jenkins.sh 3 files changed, 150 insertions(+), 45 deletions(-) git pull ssh://gerrit.osmocom.org:29418/docker-playground refs/changes/89/36389/1 diff --git a/README.md b/README.md index 436fdd0..4c6c40a 100644 --- a/README.md +++ b/README.md @@ -28,15 +28,29 @@ containers (see "caching" below) * `DOCKER_ARGS`: pass extra arguments to docker, e.g. to mount local sources for building as done in osmo-dev.git/ttcn3/ttcn3.sh +* `TEST_CONFIGS`: for tests that can run with multiple config sets (e.g. + `ttcn3-bts-test`), run only some of them. See `TEST_CONFIGS_ALL` in the + `jenkins.sh` for possible values. ### Run only one test +Run only `TC_gsup_sai` in `ttcn3-hlr-test`: + ``` $ cd ttcn3-hlr-test $ export DOCKER_ARGS="-e TEST_NAME=TC_gsup_sai" $ ./jenkins.sh ``` +Run only `TC_est_dchan` in `ttcn3-bts-test`, with the `generic` configuration: + +``` +$ cd ttcn3-bts-test +$ export DOCKER_ARGS="-e TEST_NAME=TC_est_dchan" +$ export TEST_CONFIGS="generic" +$ ./jenkins.sh +``` + ### Using nightly packages from a different date Pick a date from [here](https://downloads.osmocom.org/obs-mirror/) and use it: diff --git a/jenkins-common.sh b/jenkins-common.sh index 7978749..b4956bd 100644 --- a/jenkins-common.sh +++ b/jenkins-common.sh @@ -569,6 +569,49 @@ "$config" } +# Output the name of the test config and check if it is enabled. Use this +# function in jenkins.sh, after setting TEST_CONFIGS_ALL, e.g.: +# TEST_CONFIGS_ALL="generic oml hopping" +# The user can then set TEST_CONFIGS to only run one of the test +# configurations. +# $1: one of TEST_CONFIGS_ALL, e.g. "classic" +test_config_enabled() { + local config="$1" + local i + local valid=0 + + set +x + echo + echo "### Test configuration: $1 ###" + echo + set -x + + for i in $TEST_CONFIGS_ALL; do + if [ "$config" = "$i" ]; then + valid=1 + break + fi + done + + if [ "$valid" != "1" ]; then + set +x + echo "ERROR: config name '$config' is not one of '$TEST_CONFIGS_ALL'" + exit 1 + fi + + if [ -z "$TEST_CONFIGS" ]; then + return 0 + fi + + for i in $TEST_CONFIGS; do + if [ "$config" = "$i" ]; then + return 0 + fi + done + + return 1 +} + set -x # non-jenkins execution: assume local user name diff --git a/ttcn3-bts-test/jenkins.sh b/ttcn3-bts-test/jenkins.sh index f932b4a..0e9fd3e 100755 --- a/ttcn3-bts-test/jenkins.sh +++ b/ttcn3-bts-test/jenkins.sh @@ -1,4 +1,6 @@ #!/bin/sh +TEST_CONFIGS_ALL="generic virtphy oml hopping" +TEST_CONFIGS="${TEST_CONFIGS:-"generic oml hopping"}" . ../jenkins-common.sh IMAGE_SUFFIX="${IMAGE_SUFFIX:-master}" @@ -13,12 +15,14 @@ set -e clean_up() { - # append ':hopping' to the classnames, - # e.g. "classname='BTS_Tests'" => "classname='BTS_Tests:hopping'" - # e.g. "classname='BTS_Tests_SMSCB'" => "classname='BTS_Tests_SMSCB:hopping'" - # so the hopping test cases would not interfere with non-hopping ones in Jenkins - sed -i "s/classname='\([^']\+\)'/classname='\1:hopping'/g" \ - $VOL_BASE_DIR/bts-tester-hopping/junit-xml-hopping-*.log + if test_config_enabled "hopping"; then + # append ':hopping' to the classnames, + # e.g. "classname='BTS_Tests'" => "classname='BTS_Tests:hopping'" + # e.g. "classname='BTS_Tests_SMSCB'" => "classname='BTS_Tests_SMSCB:hopping'" + # so the hopping test cases would not interfere with non-hopping ones in Jenkins + sed -i "s/classname='\([^']\+\)'/classname='\1:hopping'/g" \ + $VOL_BASE_DIR/bts-tester-hopping/junit-xml-hopping-*.log + fi } start_bsc() { @@ -167,49 +171,77 @@ mkdir $VOL_BASE_DIR/virtphy # 1) classic test suite with BSC for OML and trxcon+fake_trx -network_replace_subnet_in_configs -start_bsc -start_bts trx 1 -start_fake_trx -start_trxcon -start_testsuite generic +if test_config_enabled "generic"; then + network_replace_subnet_in_configs + + start_bsc + start_bts trx 1 + start_fake_trx + start_trxcon + + start_testsuite generic + + docker_kill_wait ${BUILD_TAG}-trxcon + docker_kill_wait ${BUILD_TAG}-fake_trx + docker_kill_wait ${BUILD_TAG}-bts + docker_kill_wait ${BUILD_TAG}-bsc +fi # 2) some GPRS tests require virt_phy -echo "Changing to virtphy configuration" -# switch from osmo-bts-trx + trxcon + faketrx to virtphy + osmo-bts-virtual -docker_kill_wait ${BUILD_TAG}-trxcon -docker_kill_wait ${BUILD_TAG}-fake_trx -docker_kill_wait ${BUILD_TAG}-bts -cp virtphy/osmo-bts.gen.cfg $VOL_BASE_DIR/bts/ -network_replace_subnet_in_configs -# FIXME: multicast to/from a docker bridge network is currently not possible. -# See https://github.com/moby/libnetwork/issues/2397. -echo "XXX: not running the virtphy configuration" -#start_bts virtual 0 -#start_virtphy -# ... and execute the testsuite again with different cfg -#start_testsuite virtphy +if test_config_enabled "virtphy"; then + # FIXME: multicast to/from a docker bridge network is currently not possible. + # See https://github.com/moby/libnetwork/issues/2397. + set +x + echo "ERROR: not running the virtphy configuration" + exit 1 + + cp virtphy/osmo-bts.gen.cfg $VOL_BASE_DIR/bts/ + network_replace_subnet_in_configs + + start_bsc + start_bts virtual 0 + start_virtphy + + start_testsuite virtphy + + docker_kill_wait ${BUILD_TAG}-virtphy + docker_kill_wait ${BUILD_TAG}-bts + docker_kill_wait ${BUILD_TAG}-bsc +fi # 3) OML tests require us to run without BSC -docker_kill_wait ${BUILD_TAG}-bsc -# switch back from virtphy + osmo-bts-virtual to osmo-bts-trx -#docker_kill_wait ${BUILD_TAG}-virtphy -#docker_kill_wait ${BUILD_TAG}-bts +if test_config_enabled "oml"; then + cp oml/osmo-bts.gen.cfg $VOL_BASE_DIR/bts/ + network_replace_subnet_in_configs -cp oml/osmo-bts.gen.cfg $VOL_BASE_DIR/bts/ -network_replace_subnet_in_configs -start_bts trx 1 -start_fake_trx -start_trxcon -# ... and execute the testsuite again with different cfg -start_testsuite oml + start_bsc + start_bts trx 1 + start_fake_trx + start_trxcon + + start_testsuite oml + + docker_kill_wait ${BUILD_TAG}-trxcon + docker_kill_wait ${BUILD_TAG}-fake_trx + docker_kill_wait ${BUILD_TAG}-bts + docker_kill_wait ${BUILD_TAG}-bsc +fi # 4) Frequency hopping tests require different configuration files -cp fh/osmo-bsc.gen.cfg $VOL_BASE_DIR/bsc/ -cp generic/osmo-bts.gen.cfg $VOL_BASE_DIR/bts/ -# restart the BSC/BTS and run the testsuite again -docker_kill_wait ${BUILD_TAG}-bts -network_replace_subnet_in_configs -start_bsc -start_bts trx 1 -start_testsuite hopping +if test_config_enabled "hopping"; then + cp fh/osmo-bsc.gen.cfg $VOL_BASE_DIR/bsc/ + cp generic/osmo-bts.gen.cfg $VOL_BASE_DIR/bts/ + network_replace_subnet_in_configs + + start_bsc + start_bts trx 1 + start_fake_trx + start_trxcon + + start_testsuite hopping + + docker_kill_wait ${BUILD_TAG}-trxcon + docker_kill_wait ${BUILD_TAG}-fake_trx + docker_kill_wait ${BUILD_TAG}-bsc + docker_kill_wait ${BUILD_TAG}-bts +fi -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/36389?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I1dce5e6aa4b5d67f9f8c96ced611ab2875c353c8 Gerrit-Change-Number: 36389 Gerrit-PatchSet: 1 Gerrit-Owner: osmith <[email protected]> Gerrit-MessageType: newchange
