Hello Jenkins Builder, I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-e1-hardware/+/36679?usp=email to look at the new patch set (#2). The following approvals got outdated and were removed: Verified+1 by Jenkins Builder Change subject: gateware: Rework the low-level line state monitoring ticks ...................................................................... gateware: Rework the low-level line state monitoring ticks The 'tick' system was meant to allow the firmware to monitor the low level state of the line, beyong just "not aligned", but it was never really useful in the present state. Now we have more tick source available (but only one can be measured at the same time). More specifically, the firmware can monitor the presence/absence of raw pulses (LOS condition), it can also monitor the number of '1' pulses to detect an AIS signals, or simply the rate of RX pulses (to tune the local oscillator to incoming signal rate). Signed-off-by: Sylvain Munaut <t...@246tnt.com> Change-Id: I31fa8a717a26643f1b6ca5644bee1d8c41a2512e --- M gateware/common/rtl/soc_base.v M gateware/cores/no2e1 M gateware/e1-tracer/doc/mem-map.md M gateware/e1-tracer/rtl/misc.v M gateware/e1-tracer/rtl/top.v M gateware/icE1usb-proto/doc/mem-map.md M gateware/icE1usb-proto/rtl/misc.v M gateware/icE1usb-proto/rtl/top.v M gateware/icE1usb/doc/mem-map.md M gateware/icE1usb/rtl/misc.v M gateware/icE1usb/rtl/top.v 11 files changed, 176 insertions(+), 65 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-e1-hardware refs/changes/79/36679/2 -- To view, visit https://gerrit.osmocom.org/c/osmo-e1-hardware/+/36679?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1-hardware Gerrit-Branch: master Gerrit-Change-Id: I31fa8a717a26643f1b6ca5644bee1d8c41a2512e Gerrit-Change-Number: 36679 Gerrit-PatchSet: 2 Gerrit-Owner: tnt <t...@246tnt.com> Gerrit-Reviewer: Jenkins Builder Gerrit-MessageType: newpatchset