osmith has submitted this change. (
https://gerrit.osmocom.org/c/libosmocore/+/37562?usp=email )
Change subject: osmo-release: use colored output
......................................................................
osmo-release: use colored output
Make it easier to see OK, ERROR and (especially since these are
non-fatal) the WARN lines.
Change-Id: If31b1185a9b138c07ebf14a3d2928f3376b7cb9e
---
M osmo-release.sh
1 file changed, 57 insertions(+), 28 deletions(-)
Approvals:
pespin: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/osmo-release.sh b/osmo-release.sh
index 8b3bbd1..9edfccd 100755
--- a/osmo-release.sh
+++ b/osmo-release.sh
@@ -22,6 +22,23 @@
# Test stuff but don't modify stuff:
DRY_RUN="${DRY_RUN:-0}"
+RESET="\033[1;0m"
+RED="\033[1;31m"
+GREEN="\033[1;32m"
+YELLOW="\033[1;33m"
+
+ok() {
+ echo "${GREEN}OK:${RESET} $@"
+}
+
+warn() {
+ echo "${YELLOW}WARN:${RESET} $@"
+}
+
+error() {
+ echo "${RED}ERROR:${RESET} $@"
+}
+
libversion_to_lib_major() {
libversion="$1"
current="$(echo "$libversion" | cut -d ":" -f 1)"
@@ -52,16 +69,16 @@
if [ "z$debctrl_match_count" != "z0" ]; then
#echo "Dependency <$dep, $ver> from configure.ac
matched in debian/control! ($debctrl_match_count)"
if [ "z$debctrl_match_count" != "z1" ]; then
- echo "WARN: configure.ac <$dep, $ver> matches
debian/control $debctrl_match_count times, manual check required!"
+ warn "configure.ac <$dep, $ver> matches
debian/control $debctrl_match_count times, manual check required!"
else # 1 match:
parsed_match=$(echo "$debctrl_match" | tr -d
"(" | tr -d ")" | tr -d "," | tr -d " " | tr -d "\t" | sed "s/>=/ /g")
debctrl_dep=$(echo "$parsed_match" | cut -d " "
-f 1 | sed "s/-dev//g")
debctrl_ver=$(echo "$parsed_match" | cut -d " "
-f 2)
if [ "z$dep" != "z$debctrl_dep" ] || [ "z$ver"
!= "z$debctrl_ver" ]; then
- echo "ERROR: configure.ac <$dep, $ver>
does NOT match debian/control <$debctrl_dep, $debctrl_ver>!"
+ error "configure.ac <$dep, $ver> does
NOT match debian/control <$debctrl_dep, $debctrl_ver>!"
return_error=1
#else
- # echo "OK: configure.ac <$dep, $ver>
matches debian/control <$debctrl_dep, $debctrl_ver>"
+ # ok "configure.ac <$dep, $ver> matches
debian/control <$debctrl_dep, $debctrl_ver>"
fi
fi
fi
@@ -73,10 +90,10 @@
# catch and forward exit from pipe subshell "while read":
if [ $? -ne 0 ]; then
- echo "ERROR: exiting due to previous errors"
+ error "exiting due to previous errors"
exit 1
fi
- echo "OK: dependency specific versions in configure.ac and
debian/control match"
+ ok "dependency specific versions in configure.ac and debian/control
match"
}
# Make sure that depedency requirement versions match in configure.ac vs
contrib/*.spec.in.
@@ -97,16 +114,16 @@
if [ "z$rpmspecin_match_count" != "z0" ]; then
#echo "Dependency <$dep, $ver> from configure.ac
matched in contrib/*.spec.in! ($rpmspecin_match_count)"
if [ "z$rpmspecin_match_count" != "z1" ]; then
- echo "WARN: configure.ac <$dep, $ver> matches
contrib/*.spec.in $rpmspecin_match_count times, manual check required!"
+ warn "configure.ac <$dep, $ver> matches
contrib/*.spec.in $rpmspecin_match_count times, manual check required!"
else # 1 match:
parsed_match=$(echo "$rpmspecin_match" | tr -d
"(" | tr -d ")" | tr -d ":" | tr -d " " | tr -d "\t" | sed "s/BuildRequires//g"
| sed "s/pkgconfig//g" |sed "s/>=/ /g")
rpmspecin_dep=$(echo "$parsed_match" | cut -d "
" -f 1)
rpmspecin_ver=$(echo "$parsed_match" | cut -d "
" -f 2)
if [ "z$dep" != "z$rpmspecin_dep" ] || [
"z$ver" != "z$rpmspecin_ver" ]; then
- echo "ERROR: configure.ac <$dep, $ver>
does NOT match contrib/*.spec.in <$rpmspecin_dep, $rpmspecin_ver>!"
+ error "configure.ac <$dep, $ver> does
NOT match contrib/*.spec.in <$rpmspecin_dep, $rpmspecin_ver>!"
return_error=1
#else
- # echo "OK: configure.ac <$dep, $ver>
matches contrib/*.spec.in <$debctrl_dep, $debctrl_ver>"
+ # ok "configure.ac <$dep, $ver> matches
contrib/*.spec.in <$debctrl_dep, $debctrl_ver>"
fi
fi
fi
@@ -118,10 +135,10 @@
# catch and forward exit from pipe subshell "while read":
if [ $? -ne 0 ]; then
- echo "ERROR: exiting due to previous errors"
+ error "exiting due to previous errors"
exit 1
fi
- echo "OK: dependency specific versions in configure.ac and
contrib/*.spec.in match"
+ ok "dependency specific versions in configure.ac and contrib/*.spec.in
match"
}
# Make sure that patches under debian/patches/ apply:
@@ -132,10 +149,10 @@
for patch in ${GIT_TOPDIR}/debian/patches/*.patch; do
git apply --check $patch
if [ $? -ne 0 ]; then
- echo "ERROR: patch no longer applies! $patch"
+ error "patch no longer applies! $patch"
exit 1
else
- echo "OK: patch applies: $patch"
+ ok "patch applies: $patch"
fi
done
}
@@ -146,34 +163,34 @@
major="$(libversion_to_lib_major "$libversion")"
file_matches="$(find "${GIT_TOPDIR}/debian" -name
"lib*${major}.install" | wc -l)"
if [ "z$file_matches" = "z0" ]; then
- echo "ERROR: Found no matching
debian/lib*$major.install file for LIBVERSION=$libversion"
+ error "Found no matching debian/lib*$major.install file
for LIBVERSION=$libversion"
exit 1
elif [ "z$file_matches" = "z1" ]; then
- echo "OK: Found matching debian/lib*$major.install for
LIBVERSION=$libversion"
+ ok "Found matching debian/lib*$major.install for
LIBVERSION=$libversion"
else
- echo "WARN: Found $file_matches files matching
debian/lib*$major.install for LIBVERSION=$libversion, manual check required!"
+ warn "Found $file_matches files matching
debian/lib*$major.install for LIBVERSION=$libversion, manual check required!"
fi
control_matches="$(grep -e "Package"
"${GIT_TOPDIR}/debian/control" | grep "lib" | grep "$major$" | wc -l)"
if [ "z$control_matches" = "z0" ]; then
- echo "ERROR: Found no matching Package lib*$major in
debian/control for LIBVERSION=$libversion"
+ error "Found no matching Package lib*$major in
debian/control for LIBVERSION=$libversion"
exit 1
elif [ "z$control_matches" = "z1" ]; then
- echo "OK: Found 'Package: lib*$major' in debian/control
for LIBVERSION=$libversion"
+ ok "Found 'Package: lib*$major' in debian/control for
LIBVERSION=$libversion"
else
- echo "WARN: Found $file_matches files matching
'Package: lib*$major' in debian/control for LIBVERSION=$libversion, manual
check required!"
+ warn "Found $file_matches files matching 'Package:
lib*$major' in debian/control for LIBVERSION=$libversion, manual check
required!"
fi
dhstrip_lib_total="$(grep -e "dh_strip"
"${GIT_TOPDIR}/debian/rules" | grep "\-plib" | wc -l)"
dhstrip_lib_matches="$(grep -e "dh_strip"
"${GIT_TOPDIR}/debian/rules" | grep "\-plib" | grep "$major" | wc -l)"
if [ "z$dhstrip_lib_total" != "z0" ]; then
if [ "z$dhstrip_lib_matches" = "z0" ] ; then
- echo "ERROR: Found no matching 'dh_strip
-plib*$major' line in debian/rules for LIBVERSION=$libversion"
+ error "Found no matching 'dh_strip
-plib*$major' line in debian/rules for LIBVERSION=$libversion"
exit 1
elif [ "z$dhstrip_lib_total" = "z1" ]; then
- echo "OK: Found 'dh_strip -plib*$major' in
debian/rules for LIBVERSION=$libversion"
+ ok "Found 'dh_strip -plib*$major' in
debian/rules for LIBVERSION=$libversion"
else
- echo "WARN: Found
$dhstrip_lib_matches/$dhstrip_lib_total dh_strip matches 'dh_strip
-plib*$major' in debian/rules for LIBVERSION=$libversion, manual check
required!"
+ warn "Found
$dhstrip_lib_matches/$dhstrip_lib_total dh_strip matches 'dh_strip
-plib*$major' in debian/rules for LIBVERSION=$libversion, manual check
required!"
fi
fi
done
@@ -196,22 +213,22 @@
control_matches="$(grep -e "%files"
"${GIT_TOPDIR}/contrib/"*.spec.in | grep "lib" | grep "$major$" | wc -l)"
if [ "z$control_matches" = "z0" ]; then
- echo "ERROR: Found no matching '%files -n lib*$major'
in contrib/*.spec.in for LIBVERSION=$libversion"
+ error "Found no matching '%files -n lib*$major' in
contrib/*.spec.in for LIBVERSION=$libversion"
exit 1
elif [ "z$control_matches" = "z1" ]; then
- echo "OK: Found '%files -n lib*$major' in
contrib/*.spec.in for LIBVERSION=$libversion"
+ ok "Found '%files -n lib*$major' in contrib/*.spec.in
for LIBVERSION=$libversion"
else
- echo "WARN: Found $file_matches files matching '%files
-n lib*$major' in contrib/*.spec.in for LIBVERSION=$libversion, manual check
required!"
+ warn "Found $file_matches files matching '%files -n
lib*$major' in contrib/*.spec.in for LIBVERSION=$libversion, manual check
required!"
fi
control_matches="$(grep -e "_libdir"
"${GIT_TOPDIR}/contrib/"*.spec.in | grep "/lib" | grep "so.$major" | wc -l)"
if [ "z$control_matches" = "z0" ]; then
- echo "ERROR: Found no matching
'%_libdir/lib*.so.$major*' in contrib/*.spec.in for LIBVERSION=$libversion"
+ error "Found no matching '%_libdir/lib*.so.$major*' in
contrib/*.spec.in for LIBVERSION=$libversion"
exit 1
elif [ "z$control_matches" = "z1" ]; then
- echo "OK: Found '%_libdir/lib*.so.$major*' in
contrib/*.spec.in for LIBVERSION=$libversion"
+ ok "Found '%_libdir/lib*.so.$major*' in
contrib/*.spec.in for LIBVERSION=$libversion"
else
- echo "WARN: Found $file_matches files matching
'%_libdir/lib*.so.$major*' in contrib/*.spec.in for LIBVERSION=$libversion,
manual check required!"
+ warn "Found $file_matches files matching
'%_libdir/lib*.so.$major*' in contrib/*.spec.in for LIBVERSION=$libversion,
manual check required!"
fi
done
# catch and forward exit from pipe subshell "while read":
@@ -244,7 +261,7 @@
if [ "z$LIBVERS" != "z" ]; then
if [ "z$MAKEMOD" = "z" ] && [ "z$ALLOW_NO_LIBVERSION_CHANGE" = "z0" ];
then
- echo "ERROR: Before releasing, please modify some of the
libversions:"
+ error "Before releasing, please modify some of the libversions:"
for l in $LIBVERS; do echo " $l"; done
echo "After making changes, add modified file(s) to the index
using git-add."
echo "You should NOT be doing this unless you've read and
understood following article:"
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/37562?usp=email
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: If31b1185a9b138c07ebf14a3d2928f3376b7cb9e
Gerrit-Change-Number: 37562
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <[email protected]>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: osmith <[email protected]>
Gerrit-Reviewer: pespin <[email protected]>
Gerrit-MessageType: merged
