Kévin Redon has uploaded this change for review. (
https://gerrit.osmocom.org/9913
Change subject: DFU: use central DFU override check
......................................................................
DFU: use central DFU override check
TRACE_INFO will also provide the DFU start reason, but TRACE_INFO
(TRACE_LEVEL >= 4) should only be used for debugging.
WARNING: With TRACE_LEVEL >= 4 the DFU binary is over the maximum of
16 kiB allocated for the DFU bootloader.
Thus make combined will not boot the main application because its
start if after the expecte 16 kiB address; and flashing using DFU
will overwrite the DFU bootloader itself.
Change-Id: I82323e0f76c03f67df7dc8f2b6783166cc25f3aa
---
M firmware/apps/dfu/main.c
M firmware/libboard/common/source/board_cstartup_gnu.c
2 files changed, 49 insertions(+), 28 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/13/9913/1
diff --git a/firmware/apps/dfu/main.c b/firmware/apps/dfu/main.c
index 26cbb8c..796a13f 100644
--- a/firmware/apps/dfu/main.c
+++ b/firmware/apps/dfu/main.c
@@ -159,22 +159,32 @@
int USBDFU_OverrideEnterDFU(void)
{
uint32_t *app_part = (uint32_t *)FLASH_ADDR(0);
+ /* at the first call we are before the text segment has been relocated,
+ * so g_dfu is not initialized yet */
+ g_dfu = &_g_dfu;
+ static bool dfu_magic = false;
+ if (dfu_magic || (!dfu_magic && USB_DFU_MAGIC == g_dfu->magic)) {
+ dfu_magic = true;
+ return 1;
+ }
/* If the loopback jumper is set, we enter DFU mode */
- if (board_override_enter_dfu())
- return 1;
+ if (board_override_enter_dfu()) {
+ return 2;
+ }
/* if the first word of the application partition doesn't look
* like a stack pointer (i.e. point to RAM), enter DFU mode */
- if ((app_part[0] < IRAM_ADDR) ||
- ((uint8_t *)app_part[0] > IRAM_END))
- return 1;
+ if ((app_part[0] < IRAM_ADDR) || ((uint8_t *)app_part[0] > IRAM_END)) {
+ return 3;
+ }
/* if the second word of the application partition doesn't look
* like a function from flash (reset vector), enter DFU mode */
if (((uint32_t *)app_part[1] < app_part) ||
- ((uint8_t *)app_part[1] > IFLASH_END))
- return 1;
+ ((uint8_t *)app_part[1] > IFLASH_END)) {
+ return 4;
+ }
return 0;
}
@@ -218,7 +228,7 @@
EEFC_ReadUniqueID(g_unique_id);
- printf("\n\r\n\r"
+ printf("\n\r\n\r"
"=============================================================================\n\r"
"DFU bootloader %s for board %s (C) 2010-2017 by Harald
Welte\n\r"
"=============================================================================\n\r",
@@ -230,6 +240,31 @@
g_unique_id[2], g_unique_id[3]);
TRACE_INFO("Reset Cause: 0x%x\n\r", reset_cause);
+#if (TRACE_LEVEL >= TRACE_LEVEL_INFO)
+ /* Find out why we are in the DFU bootloader, and not the main
application */
+ TRACE_INFO("DFU bootloader start reason: ");
+ switch (USBDFU_OverrideEnterDFU()) {
+ case 0:
+ TRACE_INFO_WP("none\n\r");
+ break;
+ case 1:
+ TRACE_INFO_WP("DFU switch requested by main application\n\r");
+ break;
+ case 2:
+ TRACE_INFO_WP("bootloader forced (button pressed or jumper
set)\n\r");
+ break;
+ case 3:
+ TRACE_INFO_WP("stack pointer (first application word) does no
point in RAM\n\r");
+ break;
+ case 4: // the is no reason
+ TRACE_INFO_WP("reset vector (second application word) does no
point in flash\n\r");
+ break;
+ default:
+ TRACE_INFO_WP("unknown\n\r");
+ break;
+ }
+#endif
+
/* clear g_dfu on power-up reset */
if (reset_cause == 0)
memset(g_dfu, 0, sizeof(*g_dfu));
diff --git a/firmware/libboard/common/source/board_cstartup_gnu.c
b/firmware/libboard/common/source/board_cstartup_gnu.c
index 42231fb..bfe59ad 100644
--- a/firmware/libboard/common/source/board_cstartup_gnu.c
+++ b/firmware/libboard/common/source/board_cstartup_gnu.c
@@ -159,26 +159,12 @@
#if defined(BOARD_USB_DFU) && defined(APPLICATION_dfu)
- /* we are before the text segment has been relocated, so g_dfu is
- * not initialized yet */
- g_dfu = &_g_dfu;
- if ((g_dfu->magic != USB_DFU_MAGIC) && !USBDFU_OverrideEnterDFU()) {
- /* start application if valid
- * the application starts with the vector table
- * the first entry in the vector table is the initial stack pointer
(SP) address
- * the stack will be placed in RAM, which begins at 0x2000 0000
- * there is up to 48 KB of RAM (0xc000)
- * since the stack grown "downwards" it should start at the end of the
RAM: max 0x2000 c000
- * if the SP is not in this range (e.g. flash has been erased) there
is no valid application
- * the second entry in the vector table is the reset address,
corresponding to the application start
- */
- if
(((*((uint32_t*)(IFLASH_ADDR+BOARD_DFU_BOOT_SIZE)))&0xFFFF0000)==0x20000000) {
- UART_Exit();
- __disable_irq();
- BootIntoApp();
- /* Infinite loop */
- while ( 1 ) ;
- }
+ if (!USBDFU_OverrideEnterDFU()) {
+ UART_Exit();
+ __disable_irq();
+ BootIntoApp();
+ /* Infinite loop */
+ while ( 1 ) ;
}
#endif
--
To view, visit https://gerrit.osmocom.org/9913
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: simtrace2
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I82323e0f76c03f67df7dc8f2b6783166cc25f3aa
Gerrit-Change-Number: 9913
Gerrit-PatchSet: 1
Gerrit-Owner: Kévin Redon <kre...@sysmocom.de>
