osmith has uploaded this change for review. ( https://gerrit.osmocom.org/12072
Change subject: sip-connector: update vty reference
......................................................................
sip-connector: update vty reference
Change-Id: I79b91847337b6022f8f750533301b3bf0eb086df
---
M doc/manuals/vty/sipconn_vty_reference.xml
1 file changed, 106 insertions(+), 14 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-sip-connector
refs/changes/72/12072/1
diff --git a/doc/manuals/vty/sipconn_vty_reference.xml
b/doc/manuals/vty/sipconn_vty_reference.xml
index 35aad6b..dee42e6 100644
--- a/doc/manuals/vty/sipconn_vty_reference.xml
+++ b/doc/manuals/vty/sipconn_vty_reference.xml
@@ -188,7 +188,7 @@
<param name='1' doc='Prefix each log message with the log level name'
/>
</params>
</command>
- <command id='logging print file (0|1|basename)'>
+ <command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
@@ -196,6 +196,7 @@
<param name='0' doc='Don't prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and
line' />
<param name='basename' doc='Prefix each log message with the source
file's basename (strip leading paths) and line' />
+ <param name='[last]' doc='Log source file info at the end of a log
line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
@@ -205,11 +206,10 @@
<param name='MASK' doc='List of logging categories to log, e.g.
'abc:mno:xyz'. Available log categories depend on the specific
application, refer to the 'logging level' command. Optionally add
individual log levels like 'abc,1:mno,3:xyz,5', where the level
numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging level
(all|sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(everything|debug|info|notice|error|fatal)'>
+ <command id='logging level
(sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
<param name='sip' doc='SIP interface' />
<param name='mncc' doc='MNCC interface' />
<param name='app' doc='Application interface' />
@@ -232,7 +232,6 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol'
/>
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='everything' doc='Don't use. It doesn't log
anything' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels'
/>
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -240,6 +239,38 @@
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
+ <command id='logging level set-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='set-all' doc='Once-off set all categories to the given
log level. There is no single command to take back these changes -- each
category is set to the given level, period.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='logging level force-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Globally force all logging categories to
a specific level. This is released by the 'no logging level
force-all' command. Note: any 'logging level <category>
<level>' commands will have no visible effect after this, until the
forced level is released.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='no logging level force-all'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Release any globally forced log level set
with 'logging level force-all <level>'' />
+ </params>
+ </command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
@@ -308,8 +339,7 @@
<param name='show' doc='Show running system information' />
<param name='startup-config' doc='Contentes of startup configuration'
/>
</params>
- </command>
- <command id='show version'>
+ </command> <command id='show version'>
<params>
<param name='show' doc='Show running system information' />
<param name='version' doc='Displays program version' />
@@ -451,7 +481,7 @@
<param name='1' doc='Prefix each log message with the log level name'
/>
</params>
</command>
- <command id='logging print file (0|1|basename)'>
+ <command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
@@ -459,6 +489,7 @@
<param name='0' doc='Don't prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and
line' />
<param name='basename' doc='Prefix each log message with the source
file's basename (strip leading paths) and line' />
+ <param name='[last]' doc='Log source file info at the end of a log
line. If omitted, log source file info just before the log text.' />
</params>
</command>
<command id='logging set-log-mask MASK'>
@@ -468,11 +499,10 @@
<param name='MASK' doc='List of logging categories to log, e.g.
'abc:mno:xyz'. Available log categories depend on the specific
application, refer to the 'logging level' command. Optionally add
individual log levels like 'abc,1:mno,3:xyz,5', where the level
numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
</params>
</command>
- <command id='logging level
(all|sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(everything|debug|info|notice|error|fatal)'>
+ <command id='logging level
(sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
<param name='sip' doc='SIP interface' />
<param name='mncc' doc='MNCC interface' />
<param name='app' doc='Application interface' />
@@ -495,7 +525,6 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol'
/>
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='everything' doc='Don't use. It doesn't log
anything' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels'
/>
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -503,6 +532,38 @@
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
+ <command id='logging level set-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='set-all' doc='Once-off set all categories to the given
log level. There is no single command to take back these changes -- each
category is set to the given level, period.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='logging level force-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Globally force all logging categories to
a specific level. This is released by the 'no logging level
force-all' command. Note: any 'logging level <category>
<level>' commands will have no visible effect after this, until the
forced level is released.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='no logging level force-all'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Release any globally forced log level set
with 'logging level force-all <level>'' />
+ </params>
+ </command>
<command id='show logging vty'>
<params>
<param name='show' doc='Show running system information' />
@@ -855,7 +916,7 @@
<param name='1' doc='Prefix each log message with the log level name'
/>
</params>
</command>
- <command id='logging print file (0|1|basename)'>
+ <command id='logging print file (0|1|basename) [last]'>
<params>
<param name='logging' doc='Configure logging' />
<param name='print' doc='Log output settings' />
@@ -863,13 +924,13 @@
<param name='0' doc='Don't prefix each log message' />
<param name='1' doc='Prefix each log message with the source file and
line' />
<param name='basename' doc='Prefix each log message with the source
file's basename (strip leading paths) and line' />
+ <param name='[last]' doc='Log source file info at the end of a log
line. If omitted, log source file info just before the log text.' />
</params>
</command>
- <command id='logging level
(all|sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(everything|debug|info|notice|error|fatal)'>
+ <command id='logging level
(sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf)
(debug|info|notice|error|fatal)'>
<params>
<param name='logging' doc='Configure logging' />
<param name='level' doc='Set the log level for a specified category' />
- <param name='all' doc='Global setting for all subsystems' />
<param name='sip' doc='SIP interface' />
<param name='mncc' doc='MNCC interface' />
<param name='app' doc='Application interface' />
@@ -892,7 +953,6 @@
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol'
/>
<param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
- <param name='everything' doc='Don't use. It doesn't log
anything' />
<param name='debug' doc='Log debug messages and higher levels' />
<param name='info' doc='Log informational messages and higher levels'
/>
<param name='notice' doc='Log noticeable messages and higher levels' />
@@ -900,6 +960,38 @@
<param name='fatal' doc='Log only fatal messages' />
</params>
</command>
+ <command id='logging level set-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='set-all' doc='Once-off set all categories to the given
log level. There is no single command to take back these changes -- each
category is set to the given level, period.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='logging level force-all (debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Globally force all logging categories to
a specific level. This is released by the 'no logging level
force-all' command. Note: any 'logging level <category>
<level>' commands will have no visible effect after this, until the
forced level is released.' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels'
/>
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='no logging level force-all'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='force-all' doc='Release any globally forced log level set
with 'logging level force-all <level>'' />
+ </params>
+ </command>
</node>
<node id='config-stats'>
<name>config-stats</name>
--
To view, visit https://gerrit.osmocom.org/12072
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-sip-connector
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I79b91847337b6022f8f750533301b3bf0eb086df
Gerrit-Change-Number: 12072
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <[email protected]>
