Kévin Redon has uploaded this change for review. (
https://gerrit.osmocom.org/12804
Change subject: add system LED definition
......................................................................
add system LED definition
Change-Id: I97dc71ac00b64fdd05e0ff4c7e16e1b68b57b695
---
M sysmoOCTSIM/atmel_start_config.atstart
M sysmoOCTSIM/atmel_start_pins.h
M sysmoOCTSIM/driver_init.c
3 files changed, 22 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-ccid-firmware
refs/changes/04/12804/1
diff --git a/sysmoOCTSIM/atmel_start_config.atstart
b/sysmoOCTSIM/atmel_start_config.atstart
index af87e97..7492bf6 100644
--- a/sysmoOCTSIM/atmel_start_config.atstart
+++ b/sysmoOCTSIM/atmel_start_config.atstart
@@ -1044,6 +1044,13 @@
configuration:
usb_gclk_selection: Generic clock generator 1
pads:
+ LED_system:
+ name: PC18
+ definition: Atmel:SAME54_Drivers:0.0.1::SAME54P20A-AU::pad::PC18
+ mode: Digital output
+ user_label: LED_system
+ configuration:
+ pad_initial_level: High
PA24:
name: PA24
definition: Atmel:SAME54_Drivers:0.0.1::SAME54P20A-AU::pad::PA24
diff --git a/sysmoOCTSIM/atmel_start_pins.h b/sysmoOCTSIM/atmel_start_pins.h
index 3631847..7c774ed 100644
--- a/sysmoOCTSIM/atmel_start_pins.h
+++ b/sysmoOCTSIM/atmel_start_pins.h
@@ -31,5 +31,6 @@
#define PA25 GPIO(GPIO_PORTA, 25)
#define PB24 GPIO(GPIO_PORTB, 24)
#define PB25 GPIO(GPIO_PORTB, 25)
+#define LED_system GPIO(GPIO_PORTC, 18)
#endif // ATMEL_START_PINS_H_INCLUDED
diff --git a/sysmoOCTSIM/driver_init.c b/sysmoOCTSIM/driver_init.c
index efd24bc..9fbc7ed 100644
--- a/sysmoOCTSIM/driver_init.c
+++ b/sysmoOCTSIM/driver_init.c
@@ -176,6 +176,20 @@
{
init_mcu();
+ // GPIO on PC18
+
+ gpio_set_pin_level(LED_system,
+ // <y> Initial level
+ // <id> pad_initial_level
+ // <false"> Low
+ // <true"> High
+ true);
+
+ // Set pin direction to output
+ gpio_set_pin_direction(LED_system, GPIO_DIRECTION_OUT);
+
+ gpio_set_pin_function(LED_system, GPIO_PIN_FUNCTION_OFF);
+
UART_debug_init();
USB_DEVICE_INSTANCE_init();
--
To view, visit https://gerrit.osmocom.org/12804
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ccid-firmware
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I97dc71ac00b64fdd05e0ff4c7e16e1b68b57b695
Gerrit-Change-Number: 12804
Gerrit-PatchSet: 1
Gerrit-Owner: Kévin Redon <[email protected]>
