laforge has submitted this change and it was merged. (
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/14710 )
Change subject: rename TC_ho_out_fail_no_ho_detect to
TC_ho_out_fail_no_result_after_ho_cmd
......................................................................
rename TC_ho_out_fail_no_ho_detect to TC_ho_out_fail_no_result_after_ho_cmd
Change-Id: If84a1d4535ee12e33a50588e178bf1ebb6fb2cd5
---
M bsc/BSC_Tests.ttcn
M bsc/expected-results.xml
2 files changed, 6 insertions(+), 9 deletions(-)
Approvals:
laforge: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/bsc/BSC_Tests.ttcn b/bsc/BSC_Tests.ttcn
index 854dbbc..44a9172 100644
--- a/bsc/BSC_Tests.ttcn
+++ b/bsc/BSC_Tests.ttcn
@@ -3121,11 +3121,8 @@
/* BSC asks for inter-BSC-out HO, receives BSSMAP Handover Command, but then
no reply is received about HO outcome
* (neither BSSMAP Clear Command for success nor RR Handover Failure). 48.008
3.1.5.3.3 "Abnormal Conditions" applies
- * and the lchan is released.
- * Note: this test is a misnomer. On missing HO Detect, normally the old BSS
receives an RR Handover Failure from the
- * MS. Instead, this test is about the scenario in "Abnormal Conditions" as
explained above. Leaving the test's name
- * unchanged to not confuse jenkins result reports. */
-private function f_tc_ho_out_fail_no_ho_detect(charstring id) runs on
MSC_ConnHdlr {
+ * and the lchan is released. */
+private function f_tc_ho_out_fail_no_result_after_ho_cmd(charstring id) runs
on MSC_ConnHdlr {
g_pars := f_gen_test_hdlr_pars();
var PDU_BSSAP ass_req := f_gen_ass_req();
@@ -3198,13 +3195,13 @@
setverdict(pass);
f_sleep(1.0);
}
-testcase TC_ho_out_fail_no_ho_detect() runs on test_CT {
+testcase TC_ho_out_fail_no_result_after_ho_cmd() runs on test_CT {
var MSC_ConnHdlr vc_conn;
f_init(1, true);
f_sleep(1.0);
- vc_conn := f_start_handler(refers(f_tc_ho_out_fail_no_ho_detect));
+ vc_conn :=
f_start_handler(refers(f_tc_ho_out_fail_no_result_after_ho_cmd));
vc_conn.done;
}
@@ -4135,7 +4132,7 @@
execute( TC_ho_out_of_this_bsc() );
execute( TC_ho_out_fail_no_msc_response() );
execute( TC_ho_out_fail_rr_ho_failure() );
- execute( TC_ho_out_fail_no_ho_detect() );
+ execute( TC_ho_out_fail_no_result_after_ho_cmd() );
execute( TC_ho_into_this_bsc() );
execute( TC_ho_in_fail_msc_clears() );
diff --git a/bsc/expected-results.xml b/bsc/expected-results.xml
index d2c474c..3ea202c 100644
--- a/bsc/expected-results.xml
+++ b/bsc/expected-results.xml
@@ -87,7 +87,7 @@
<testcase classname='BSC_Tests' name='TC_ho_out_of_this_bsc' time='MASKED'/>
<testcase classname='BSC_Tests' name='TC_ho_out_fail_no_msc_response'
time='MASKED'/>
<testcase classname='BSC_Tests' name='TC_ho_out_fail_rr_ho_failure'
time='MASKED'/>
- <testcase classname='BSC_Tests' name='TC_ho_out_fail_no_ho_detect'
time='MASKED'/>
+ <testcase classname='BSC_Tests' name='TC_ho_out_fail_no_result_after_ho_cmd'
time='MASKED'/>
<testcase classname='BSC_Tests' name='TC_ho_into_this_bsc' time='MASKED'/>
<testcase classname='BSC_Tests' name='TC_ho_in_fail_msc_clears'
time='MASKED'/>
<testcase classname='BSC_Tests'
name='TC_ho_in_fail_msc_clears_after_ho_detect' time='MASKED'/>
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/14710
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: If84a1d4535ee12e33a50588e178bf1ebb6fb2cd5
Gerrit-Change-Number: 14710
Gerrit-PatchSet: 4
Gerrit-Owner: neels <[email protected]>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <[email protected]>
Gerrit-Reviewer: neels <[email protected]>
Gerrit-MessageType: merged
