pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bts/+/15706
Change subject: bts-trx: Time out if no clock ind recvd after RSP POWERON ...................................................................... bts-trx: Time out if no clock ind recvd after RSP POWERON Before this patch, if due to whatever reason the TRX started fine (RSP POWERON 0) and sockets were created but no CLOCK IND was ever received by the BTS, it wouldn't notice since the timerfd timeouts (bts_shutdown("no clock")) are only checked after the first CLOCK IND is sent by the TRX. As a result, the BTS would be kept on forever saying everything is fine but it would be sending no DL burst at all to the TRX (tested with a modfied osmo-trx dropping clock indication). With this patch, new APIs are added to indicate the scheduler_trx code the timeframes where clock ind are expected (between RSP POWERON 0 and RSP POWEROFF 0); if TRX sends clock indications out of that timeframe, BTs lower layers will drop them (controlled by "powered" bool). Hence, the scheduler_trx can now place a timeout (reusing same timerfd because its new use is exclusive in time with its other previous use) when it is told that CLOCK IND should start appearing, and if none arrives in considerable time, then the BTS can be shut down to notify the rest of the network. Related: OS#4215 Change-Id: Iba5dbe867aff10e70ec73dbf1f7aeeecb15c0a4d --- M include/osmo-bts/scheduler.h M src/osmo-bts-trx/l1_if.c M src/osmo-bts-trx/scheduler_trx.c 3 files changed, 57 insertions(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/06/15706/1 diff --git a/include/osmo-bts/scheduler.h b/include/osmo-bts/scheduler.h index e693e3e..3100a1d 100644 --- a/include/osmo-bts/scheduler.h +++ b/include/osmo-bts/scheduler.h @@ -175,6 +175,12 @@ /*! \brief PHY informs us of new (current) GSM frame number */ int trx_sched_clock(struct gsm_bts *bts, uint32_t fn); +/*! \brief PHY informs us clock indications should start to be received */ +int trx_sched_clock_started(struct gsm_bts *bts); + +/*! \brief PHY informs us no more clock indications should be received anymore */ +int trx_sched_clock_stopped(struct gsm_bts *bts); + /*! \brief set multiframe scheduler to given physical channel config */ int trx_sched_set_pchan(struct l1sched_trx *l1t, uint8_t tn, enum gsm_phys_chan_config pchan); diff --git a/src/osmo-bts-trx/l1_if.c b/src/osmo-bts-trx/l1_if.c index 1079128..38b43b9 100644 --- a/src/osmo-bts-trx/l1_if.c +++ b/src/osmo-bts-trx/l1_if.c @@ -176,10 +176,13 @@ plink->u.osmotrx.poweronoff_sent = false; if (poweronoff) { - if (rc == 0 && pinst->phy_link->state != PHY_LINK_CONNECTED) + if (rc == 0 && pinst->phy_link->state != PHY_LINK_CONNECTED) { + trx_sched_clock_started(pinst->trx->bts); phy_link_state_set(pinst->phy_link, PHY_LINK_CONNECTED); - else if (rc != 0 && pinst->phy_link->state != PHY_LINK_SHUTDOWN) + } else if (rc != 0 && pinst->phy_link->state != PHY_LINK_SHUTDOWN) { + trx_sched_clock_stopped(pinst->trx->bts); phy_link_state_set(pinst->phy_link, PHY_LINK_SHUTDOWN); + } } } diff --git a/src/osmo-bts-trx/scheduler_trx.c b/src/osmo-bts-trx/scheduler_trx.c index af639e2..c967db8 100644 --- a/src/osmo-bts-trx/scheduler_trx.c +++ b/src/osmo-bts-trx/scheduler_trx.c @@ -1682,6 +1682,52 @@ return -1; } +/*! \brief This is the cb of the initial timer set upon start. On timeout, it + * means it wasn't replaced and hence no CLOCK IND was received. */ +static int trx_start_noclockind_to_cb(struct osmo_fd *ofd, unsigned int what) +{ + struct gsm_bts *bts = ofd->data; + struct bts_trx_priv *bts_trx = (struct bts_trx_priv *)bts->model_priv; + struct osmo_trx_clock_state *tcs = &bts_trx->clk_s; + + osmo_fd_close(&tcs->fn_timer_ofd); /* Avoid being called again */ + bts_shutdown(bts, "No clock since TRX was started"); + return -1; +} + +/*! \brief PHY informs us clock indications should start to be received */ +int trx_sched_clock_started(struct gsm_bts *bts) +{ + struct bts_trx_priv *bts_trx = (struct bts_trx_priv *)bts->model_priv; + struct osmo_trx_clock_state *tcs = &bts_trx->clk_s; + struct timespec it_val = {10, 0}; + struct timespec it_intval = {0, 0}; + + LOGP(DL1C, LOGL_NOTICE, "GSM clock started, waiting for clock indications\n"); + osmo_fd_close(&tcs->fn_timer_ofd); + memset(tcs, 0, sizeof(*tcs)); + tcs->fn_timer_ofd.fd = -1; + /* Set up timeout to shutdown BTS if no clock ind is received in 10 + * seconds. Upon clock ind receival, fn_timer_ofd will be reused and + * timeout won't trigger. + */ + osmo_timerfd_setup(&tcs->fn_timer_ofd, trx_start_noclockind_to_cb, bts); + osmo_timerfd_schedule(&tcs->fn_timer_ofd, &it_val, &it_intval); + return 0; +} + +/*! \brief PHY informs us no more clock indications should be received anymore */ +int trx_sched_clock_stopped(struct gsm_bts *bts) +{ + struct bts_trx_priv *bts_trx = (struct bts_trx_priv *)bts->model_priv; + struct osmo_trx_clock_state *tcs = &bts_trx->clk_s; + + LOGP(DL1C, LOGL_NOTICE, "GSM clock stopped\n"); + osmo_fd_close(&tcs->fn_timer_ofd); + + return 0; +} + /*! reset clock with current fn and schedule it. Called when trx becomes * available or when max clock skew is reached */ static int trx_setup_clock(struct gsm_bts *bts, struct osmo_trx_clock_state *tcs, -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/15706 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: Iba5dbe867aff10e70ec73dbf1f7aeeecb15c0a4d Gerrit-Change-Number: 15706 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pes...@sysmocom.de> Gerrit-MessageType: newchange