pespin has submitted this change and it was merged. ( https://gerrit.osmocom.org/c/osmo-gsm-manuals/+/15739 )
Change subject: sigtran-osmocom.adoc: Fix typos ...................................................................... sigtran-osmocom.adoc: Fix typos Change-Id: I31314dd36bac202103483bc93350736bfbc76be1 --- M common/chapters/sigtran-osmocom.adoc 1 file changed, 7 insertions(+), 7 deletions(-) Approvals: laforge: Looks good to me, approved Jenkins Builder: Verified diff --git a/common/chapters/sigtran-osmocom.adoc b/common/chapters/sigtran-osmocom.adoc index 1f2bb1e..a0bc475 100644 --- a/common/chapters/sigtran-osmocom.adoc +++ b/common/chapters/sigtran-osmocom.adoc @@ -152,8 +152,8 @@ . implement SCCP connection coupling. This is something like a proxy for connection-oriented SCCP, and is what is used in SS7 to route - beyond a given MTP netwokr (e.g. at gateways between different MTP - networks) + beyond a given MTP network (e.g. at gateways between different MTP + networks). . consider all SCCP messages to be destined for the local point code of the receiver. This then means that the SG functionality must be @@ -231,7 +231,7 @@ * to point all BSCs and the MSC to connect to the IP+Port of the STP * to configure the point code of the MSC in the BSCs -==== A minimaal 3G configuration to get started +==== A minimal 3G configuration to get started You will be running the following programs: @@ -252,7 +252,7 @@ ---- You can use the OsmoSTP fully dynamic registration feature, so the -HNBGWs, the SMC and the SGSNwill simply register with their point +HNBGWs, the MSC and the SGSN will simply register with their point codes to the STP, and the STP will create most configuration on the fly. @@ -345,7 +345,7 @@ |Description|More verbose description (for human user only) |Protocol|Protocol (M3UA, SUA, IPA) to be operated by this server |Routing Key|Routing Key (mostly Point Code) routed to this AS -|Traffic Mode|Theoretically Bradcast, Load-Balance. Currently only Ovverride +|Traffic Mode|Theoretically Broadcast, Load-Balance. Currently only Override |Recovery Timeout|Duration of the AS T(r) recovery timer. During this time, outgoing messages are queued. If the AS is ACTIVE before timer expiration, the queue is drained. At @@ -398,7 +398,7 @@ === Osmocom SCCP Instances -An Osmocom SS7 Instance can be bound to an Osmocom SS7 Instance. It +An Osmocom SCCP Instance can be bound to an Osmocom SS7 Instance. It will register/bind for the ITU-standard Service Indicator (SI). === Osmocom SCCP User @@ -419,7 +419,7 @@ This is how Osmocom represents each individual connection of connection-oriented SCCP. -To illustrate the practical applicaiton: For the common use case of +To illustrate the practical application: For the common use case of the A or Iu interfaces, this means that every dedicated radio channel that is currently active to any UE/MS has one SCCP connection to the MSC and/or SGSN. -- To view, visit https://gerrit.osmocom.org/c/osmo-gsm-manuals/+/15739 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-gsm-manuals Gerrit-Branch: master Gerrit-Change-Id: I31314dd36bac202103483bc93350736bfbc76be1 Gerrit-Change-Number: 15739 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pes...@sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <lafo...@osmocom.org> Gerrit-Reviewer: pespin <pes...@sysmocom.de> Gerrit-MessageType: merged