tsaitgaist has uploaded this change for review. ( 
https://gerrit.osmocom.org/c/osmo-asf4-dfu/+/16855 )


Change subject: fix DFU magic address and linker script
......................................................................

fix DFU magic address and linker script

using the address specified in the linker script leads to a large
output binary (as large as the address specified.
instead the address is now specified in the source file.

Change-Id: I69ad101593e903b74084f179cfc97fccccdfa5a3
---
M gcc/gcc/same54p20a_flash.ld
M usb_dfu_main.c
2 files changed, 3 insertions(+), 9 deletions(-)



  git pull ssh://gerrit.osmocom.org:29418/osmo-asf4-dfu refs/changes/55/16855/1

diff --git a/gcc/gcc/same54p20a_flash.ld b/gcc/gcc/same54p20a_flash.ld
index 32ded77..6aa3fb1 100644
--- a/gcc/gcc/same54p20a_flash.ld
+++ b/gcc/gcc/same54p20a_flash.ld
@@ -48,12 +48,6 @@
 /* Section Definitions */
 SECTIONS
 {
-    /* Location of the DFU magic. The application must set the magic value 
"DFU!" (e.g. 0x44465521) at this address to force the DFU bootloader to start 
(e.g. to perform a DFU detach) */
-    .dfu_magic 0x20000000 :
-    {
-        KEEP(*(.dfu_magic)) ;
-    }
-
     .text :
     {
         . = ALIGN(4);
diff --git a/usb_dfu_main.c b/usb_dfu_main.c
index 7fd54d3..f431d29 100644
--- a/usb_dfu_main.c
+++ b/usb_dfu_main.c
@@ -28,7 +28,7 @@
 static uint32_t* application_start_address;

 /** Location of the DFU magic value to force starting DFU */
-static uint32_t dfu_magic __attribute__ ((section (".dfu_magic"))) 
__attribute__ ((__used__));
+static volatile uint32_t* dfu_magic = (uint32_t*)HSRAM_ADDR; // magic value 
should be written at start of RAM

 /** Check if the bootloader is valid
  *  \return true if the bootloader is valid and can be run
@@ -51,8 +51,8 @@
  */
 static bool check_force_dfu(void)
 {
-       if (0x44465521 == dfu_magic) { // check for the magic value which can 
be set by the main application
-               dfu_magic = 0; // erase value so we don't stay in the DFU 
bootloader upon reset
+       if (0x44465521 == *dfu_magic) { // check for the magic value which can 
be set by the main application
+               *dfu_magic = 0; // erase value so we don't stay in the DFU 
bootloader upon reset
                return true;
        }
        if (0 == gpio_get_pin_level(BUTTON_FORCE_DFU)) { // signal is low when 
button is pressed

--
To view, visit https://gerrit.osmocom.org/c/osmo-asf4-dfu/+/16855
To unsubscribe, or for help writing mail filters, visit 
https://gerrit.osmocom.org/settings

Gerrit-Project: osmo-asf4-dfu
Gerrit-Branch: sysmoOCTSIM
Gerrit-Change-Id: I69ad101593e903b74084f179cfc97fccccdfa5a3
Gerrit-Change-Number: 16855
Gerrit-PatchSet: 1
Gerrit-Owner: tsaitgaist <kre...@sysmocom.de>
Gerrit-MessageType: newchange

Reply via email to