Hi, I had a similar problem and whatever the cause of the original download problem, the issue with the
>>> WARNING: Stream does not start with requested frame, ignoring data.. WARNING: Stream does not start with requested frame, ignoring data.. 35295.987 kB / 953.41 sec (44.1%) Download may be incomplete (downloaded about 44.10%), try resuming <<< ... is that get_iplayer cannot resume properly. I 'fixed' this by deleting the partial download file then re-downloading. I did this probably a day after I tried the original download and it worked file. Regards Michael -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Clive Sent: 13 July 2011 23:12 To: [email protected] Subject: Re: Errors downloading this evening On 13/07/2011 23:00, Tony Quinn wrote: > In message <[email protected]>, Nigel Taylor > <[email protected]> writes >> Hi, > >> You need to upgrade what you are seeing is a known problem. You need the >> latest rtmpdump version 2.3, (rtmpdump version 2.4 source is available, >> but no built windows version yet) your's is 2.2d. > > FWIW, I have *just* updated rtmpdump and am getting the same errors. > Will investigate further in the morning ---Ditto--- But I had re-installed middle of last week when I started getting problems. Initially I went again for Falco and after this evening's install, it d/l like a train but gave me an aac. I had been using the script which did a further remux to m4a so copied over the .pl in the new install with the m4a version - and it all fell apart again. So I removed the m4a version and copied back the version from this evening's install - and it still all fell apart. So, I conclude that my Falco "train" experience was luck. Clive _______________________________________________ get_iplayer mailing list [email protected] http://lists.infradead.org/mailman/listinfo/get_iplayer _______________________________________________ get_iplayer mailing list [email protected] http://lists.infradead.org/mailman/listinfo/get_iplayer
