Dear Guerric, Can you try again without the automatic refinement option in the file elastostatic.param (REFINE = 0). I think the computation of a posteriori error criterion is not well parallelized (I planned to work on the stabilization of the parallelization on a near future).
Yves. Le 10/06/2013 10:45, Guerric Beaugrand a écrit : > Dear Getfem users, > > I think I need your help. I have two processor core, I successfully > compiled the library in parallel mode (mpich2, mumps 4.10) and when I > run the elastostatic file with the command: > mpirun-np 2. / elastostatic. / elastostatic.param > I have the following errors: > > #################################################################### > min = 2.22462e-06 > Nb elt to be refined : 392 > Input Error: Incorrect ncuts. > Partition time 0.00189495 > Trace 2 in getfem_models.cc, line 1827: Mass term assembly for > Dirichlet condition > Trace 2 in getfem_models.cc, line 1869: Source term assembly for > Dirichlet condition > Input Error: Incorrect ncuts. > Partition time 0.0017879 > Total number of variables : 8980 > Trace 2 in getfem_models.cc, line 3265: Stiffness matrix assembly for > isotropic linearized elasticity > terminate called after throwing an instance of 'gmm::gmm_error' > what(): Error in getfem_assembling_tensors.cc, line 1818 : > error: the convex 683 is not part of the mesh > Total number of variables : 8980 > > ===================================================================================== > = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES > = EXIT CODE: 134 > = CLEANING UP REMAINING PROCESSES > = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES > ===================================================================================== > APPLICATION TERMINATED WITH THE EXIT STRING: Aborted (signal 6) > #################################################################### > > I tried several version of metis, but it changes nothing. I saw > Daniele Bettella > (https://mail.gna.org/public/getfem-users/2008-07/msg00006.html) had > had the same problem, but the answer is not in the archives. > > Someone already solved this problem? Any ideas? > > Thank you in advance, > > regards, > Guerric > > > _______________________________________________ > Getfem-users mailing list > [email protected] > https://mail.gna.org/listinfo/getfem-users -- Yves Renard ([email protected]) tel : (33) 04.72.43.87.08 Pole de Mathematiques, INSA-Lyon fax : (33) 04.72.43.85.29 20, rue Albert Einstein 69621 Villeurbanne Cedex, FRANCE http://math.univ-lyon1.fr/~renard ---------
_______________________________________________ Getfem-users mailing list [email protected] https://mail.gna.org/listinfo/getfem-users
