I tried the ATI driver. I got a blank screen. Here is what I got for teh
debug info
Mach64 detected: Mach64 GX - Graphics Pro Turbo 1600
doing read/write test...
wrote 0x55555555, got back 0xffffffff.
Mach64: Register Dump.
crtc_h_total 0xffffffff.
crtc_h_sync 0xffffffff.
crtc_v_total 0xffffffff.
crtc_v_sync 0xffffffff.
crtc_vline 0xffffffff.
crtc_display_start 0xffffffff.
crtc_int_cntl 0xffffffff.
crtc_gen_cntl 0xffffffff.
clock_cntl 0xffffffff.
bus_cntl 0xffffffff.
mem_cntl 0xffffffff.
dac_cntl 0xffffffff.
config_cntl 0xffffffff.
gen_test_cntl 0xffffffff.
mach64_detect: Unknown ram size (7) - using 8MB
Claimed framebuffer memory:
virtual address: 0xc901c000
physical base address: 0xfe000000
size: 8 MB
phys address lines: 0xffffffff
mach64_detect: Aperture size: 8 MB.
mach64_detect: Aperture location (physical): 0xfe000000.
mach64_detect: MMIO_Base: 0xc981bc00 RAM: 8192 Kb.
mach64_detect: Dac Type `SC15021'.
Mach64 detected: Mach64 GX - Graphics Pro Turbo 1600, rev 1, LFB Base 0xfe000000.
wrote 0xAAAAAAAA, got back 0xffffffff.
wrote 0x55555555, got back 0xffffffff.
KGI monitor driver rev $Revision: 1.12 $
ATI Technologies Mach64 integrated DAC driver $Revision: 1.9 $
Mach64 CT/VT/GT integrated PLL clock driver rev $Revision: 1.7 $
Manufacturer Model driver loaded.
mach64.c:169: Display start: 0x7ffff8 pixels
mach64.c:170: Display pitch: 0x1ffc pixels
kgifb_init: xres 640 yres 480 bpp 8 vaddr 0xc901c000 paddr 0xfe000000 size 8388608
fb1: KGI frame buffer device using 8192K of video memory
then blank screen.
-----==
----== _
---== (_)__ __ ____ __ James Simmons
--== / / _ \/ // /\ \/ / [EMAIL PROTECTED]
-=====/_/_//_/\_,_/ /_/\_\ fbcon/gfx developer
The choice of a GNU generation
