Hi Lucas! First! never be sorry to ask! we are here for this, at least I hope we can help you...
Let's start from the set up, it seems to me that the error can be given by the wrong version of CSnake for your source code. For Gimias 1.3.0 CSnake version is 2.4.2 (on gimias1.3.0 download page the link to csnake is the correct one) could you please install it and try to perform the following steps? * configure thirdParty ( you don't need to compile I think ) * install files * create cmake * compile solution tell us if in any of these steps you find an error Chiara -----Original Message----- From: Lucas Klaus Beyer [mailto:[email protected]] Sent: miércoles, 02 de marzo de 2011 17:29 To: [email protected] Subject: [Gimias-developers] Compiling 1.3.0 on windows: problems with "generateCLP" Hello, First, sorry for the long post, I try to provide as much info as possible. I did my best following your compilation guide, but I still face problems. I wonder if those are due to mistakes on my part or bugs in the build-system. My setup: - MS Visual C++ 2008 - Gimias 1.3.0 source code from http://sourceforge.net/projects/gimias/files/GIMIAS%20v1.3.0/Developer/gimia s-v1.3.0-source.zip/download - CSnake 2.4.0 - CMake 2.8 - source folder: D:/pdp-gimias - build folder: D:/pdp-gimias-build 1. Building "by hand", i.e. opening the CILAB_TOOLKIT.sln and compiling BUILD_ALL works fine. Then, compiling INSTALL doesn't work due to the following error message: 1>-- Install configuration: "Debug" 1>CMake Error at cmake_install.cmake:31 (FILE): 1> file INSTALL cannot find 1> "D:/pdp-gimias/gimias-source/thirdParty/thirdParty/MSVC/MSVC7.1/msvcr71.dll" . I searched the whole D:/pdp-gimias folder for any "msvc*.dll" file but found none at all. Is this a leftover from older versions? 2. Anyways, I went ahead figuring the manual just says to "compile the solution", not to "install" it. Thus I executed the next step which should be "Create CMake files and run CMake" if I got it right. It ran until the console showed "-- Generating done", the GUI didn't react anymore but I still left it running for about half an hour. Seeing both the CPU and HDD activity was near-zero during all that time, I killed the process. This is the error I then saw in the CSnake logbox: Working, patience please... Action: Create C Make Files And Run C Make. Stopped, error in process. CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: Add depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: Add depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: Add depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: AffineRegistration depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: AffineRegistration depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: AffineRegistration depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: AffineTransform depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: AffineTransform depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: AffineTransform depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: BSplineDeformableRegistration depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: BSplineDeformableRegistration depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: BSplineDeformableRegistration depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: BinaryThresholdImageFilter depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: BinaryThresholdImageFilter depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: BinaryThresholdImageFilter depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: Cast depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: Cast depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: Cast depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: CheckerBoard depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: CheckerBoard depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: CheckerBoard depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: Add depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: AffineRegistration depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: AffineTransform depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: BSplineDeformableRegistration depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: BinaryThresholdImageFilter depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: Cast depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: CheckerBoard depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: ConfidenceConnected depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: CurvatureAnisotropicDiffusion depends on unknown target: generateCLP CMake Error: Unknown Target referenced : generateCLP CMake Error: Target: GaussianBlurImageFilter depends on unknown target: generateCLP 4. I then executed the next step, namely "Install files to Build Folder", which seems to have worked. 5. Opened the Gimias.sln solution and compiled BUILD_ALL, which fails for the obvious reason: 1>Generating AddCLP.h 1>The command "D:\pdp-gimias-build\bin\Debug\GenerateCLP.exe" is either misspelled or couldn't be found. 6. The quick fix for me was to copy D:/pdp-gimias-build/thirdParty/bin/Debug/GenerateCLP.exe to D:/pdp-gimias-build/bin/Debug But this doesn't "feel right". tl;dr: Did I do something wrong or is that a bug or an omission in the documentation? Best regards, Lucas ---------------------------------------------------------------------------- -- Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Gimias-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gimias-developers ------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev _______________________________________________ Gimias-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/gimias-developers
