On Sun, 28 Dec 2003 13:35:03 -0800 (PST), Gezim Hoxha <[EMAIL PROTECTED]> wrote: > I'm really frustrated with the storke tool in gimp > 1.3.23, and I hope it's because of my ignorance. > Almost all selections (except rectangular ones) turn > out really ugly when storked...here is an example with > a circle > http://www.geocities.com/hgezim/stroke.html
The circle is converted to line segments for stroking, and unfortunately there are not enough of them (12 here) so the results are ugly. Ideally, it should be possible to configure how close the segments fit the shape of the selection. It would also be nice to configure if the stroking is done inside, outside or on both sides of the edges of the selection. Anyway, there is a workaround that should allow you to get a better circle until some new options are added for stroking selections: just convert the selection to a path, then stroke the path. The results should look a bit better. Note that you will probably need to double the stroke width because that parameter is not interpreted in the same way for selections and for paths. Also, you may have to adjust the radius of your circle (another difference, probably related to stroking inside or on both sides of the line segments). -Raphael _______________________________________________ Gimp-developer mailing list [EMAIL PROTECTED] http://lists.xcf.berkeley.edu/mailman/listinfo/gimp-developer
