I have exact the same
problem, whereas the installation on Windows is rather easy. Hope that someone
can give a good advice.
[mailto:[EMAIL PROTECTED] On Behalf Of Ron Eggler
Sent: woensdag 12 januari 2005
Subject: [Gimp-user] Install gimp2
had to update glib(2.6.0), pkconfig (0.14.0) but still get
checking for pkg-config... /usr/local/bin/pkg-config
checking for GLIB - version >= 2.4.5... no
*** Could not run GLIB test program, checking why...
*** The test program compiled, but did not run. This usually means
*** that the run-time linker is not finding GLIB or finding the wrong
*** version of GLIB. If it is not finding GLIB, you'll need to set your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point
*** to the installed location Also, make sure you have run ldconfig if
*** is required on your system
*** If you have an old version installed, it is best to remove it, although
*** you may also be able to get things to work by modifying LD_LIBRARY_PATH
configure: error: Test for GLIB failed. See the file 'INSTALL' for help.
erm, yes i have an older version installed but if i remove
it in yast, it tells me it couldn't remove it cause several applications would
need it. i updated to version 2.6.0.
what do i have to do to solve this problem?
- RE: [Gimp-user] Install gimp2 Deem Vermeulen