Hi Alex,

Thanks for the tip - my gini network is now set up ok. However, when I tried 
compiling I got several errors. I tried compiling again and then it just 
worked! So looks like in gini if it doesn't work the first time, just try try 
again until it works.

Peter

-----Original Message-----
From: Alexis Malozemoff [mailto:[EMAIL PROTECTED]
Sent: Thu 10/16/2008 10:01 PM
To: Peter Ochodo
Cc: gini@cs.mcgill.ca
Subject: Re: [gini] urgent: error when setting up fig 10.3 in assignment3
 
Amazingly, if you ignore the error, set all your subnets, and restart
gini there is no problem.
Why this is happening, I'm not sure.

Alex

2008/10/16 Peter Ochodo <[EMAIL PROTECTED]>:
>
> Hey Prof Mahesh sir & Alex,
>
> When I compose a topology consisting 1 router, 1 subnet & 1 uml; Link them 
> {router - subnet - uml}; then set the subnet network address and hit accept, 
> everything is nice and dandy.
>
> However, when I compose the same topology (router - subnet - uml) next to my 
> first topology, then set the subnet network address, then hit accept ... 
> Kaboom! I get the error below. I have attached a screenshot of the simple 
> gini topology that I have just described.
>
> This is pretty serious because I can't compose figure 10.3 and proceed with 
> the experiments. Please advise.
>
> I reinstalled gini using 1.02 tar file on the website, but still have the 
> same problem.
>
> Thanks
>
> Peter
>
> ***********************************ERROR********************************************
>
> Error: 12
> <class '_tkinter.TclError'> Exception in Tk callback
>  Function: <function <lambda> at 0x874a64c> (type: <type 'function'>)
>  Args: ()
> Traceback (innermost last):
>  File "/home/peter/gini/share/gbuilder/Pmw/Pmw_1_3/lib/PmwBase.py", line 
> 1747, in __call__
>    return apply(self.func, args)
>  File "/home/peter/gini/bin/gbuilder", line 1461, in <lambda>
>    buttons.add('Accept', command=lambda : self.save_subnet(req_list, 
> opt_list, toplevel))
>  File "/home/peter/gini/bin/gbuilder", line 2104, in save_subnet
>    self.update_subnet(req_p, opt_p)
>  File "/home/peter/gini/bin/gbuilder", line 2079, in update_subnet
>    self.force_ip(target_device, self.current_obj[1], 1)
>  File "/home/peter/gini/bin/gbuilder", line 3283, in force_ip
>    self.balloon.tagbind(self.canvas, self.find_by_range(xco, yco), 
> target_obj.balloon_help())
>  File "/home/peter/gini/share/gbuilder/Pmw/Pmw_1_3/lib/PmwBalloon.py", line 
> 143, in tagbind
>    sHelp = statusHelp, bHelp = balloonHelp:
>  File "/usr/lib/python2.5/lib-tk/Tkinter.py", line 2121, in tag_bind
>    sequence, func, add)
>  File "/usr/lib/python2.5/lib-tk/Tkinter.py", line 949, in _bind
>    self.tk.call(what + (sequence, cmd))
> <class '_tkinter.TclError'>: wrong # args: should be 
> ".139277964.139277900.139364012.139333612.139363980 bind tagOrId ?sequence? 
> ?command?"
>
> _______________________________________________
> gini mailing list
> gini@cs.mcgill.ca
> http://mailman.cs.mcgill.ca/mailman/listinfo/gini
>
>

_______________________________________________
gini mailing list
gini@cs.mcgill.ca
http://mailman.cs.mcgill.ca/mailman/listinfo/gini

Reply via email to