Mark messages in some perl scripts for translation.
In these series v5:
- Add and use a subroutine to comment lines. This way we can mark strings
for translation without including the comment char within them.
- Mark for translation a message for the user when she is composing an
e-mail in git-send-email.perl.
Interdiff included below.
Vasco Almeida (16):
Git.pm: add subroutines for commenting lines
i18n: add--interactive: mark strings for translation
i18n: add--interactive: mark simple here-documents for translation
i18n: add--interactive: mark strings with interpolation for
translation
i18n: clean.c: match string with git-add--interactive.perl
i18n: add--interactive: mark plural strings
i18n: add--interactive: mark patch prompt for translation
i18n: add--interactive: i18n of help_patch_cmd
i18n: add--interactive: mark edit_hunk_manually message for
translation
i18n: add--interactive: remove %patch_modes entries
i18n: add--interactive: mark status words for translation
i18n: send-email: mark strings for translation
i18n: send-email: mark warnings and errors for translation
i18n: send-email: mark string with interpolation for translation
i18n: send-email: mark composing message for translation
i18n: difftool: mark warnings for translation
Makefile | 3 +-
builtin/clean.c | 10 +-
git-add--interactive.perl | 329 ++++++++++++++++++++++++++++++----------------
git-difftool.perl | 22 ++--
git-send-email.perl | 192 ++++++++++++++-------------
perl/Git.pm | 23 ++++
perl/Git/I18N.pm | 19 ++-
t/t0202/test.pl | 14 +-
8 files changed, 391 insertions(+), 221 deletions(-)
-- >8 --
diff --git a/git-add--interactive.perl b/git-add--interactive.perl
index 4754104..56e6889 100755
--- a/git-add--interactive.perl
+++ b/git-add--interactive.perl
@@ -1039,26 +1039,26 @@ sub color_diff {
my %edit_hunk_manually_modes = (
stage => N__(
-"# If the patch applies cleanly, the edited hunk will immediately be
-# marked for staging."),
+"If the patch applies cleanly, the edited hunk will immediately be
+marked for staging."),
stash => N__(
-"# If the patch applies cleanly, the edited hunk will immediately be
-# marked for stashing."),
+"If the patch applies cleanly, the edited hunk will immediately be
+marked for stashing."),
reset_head => N__(
-"# If the patch applies cleanly, the edited hunk will immediately be
-# marked for unstaging."),
+"If the patch applies cleanly, the edited hunk will immediately be
+marked for unstaging."),
reset_nothead => N__(
-"# If the patch applies cleanly, the edited hunk will immediately be
-# marked for applying."),
+"If the patch applies cleanly, the edited hunk will immediately be
+marked for applying."),
checkout_index => N__(
-"# If the patch applies cleanly, the edited hunk will immediately be
-# marked for discarding"),
+"If the patch applies cleanly, the edited hunk will immediately be
+marked for discarding"),
checkout_head => N__(
-"# If the patch applies cleanly, the edited hunk will immediately be
-# marked for discarding."),
+"If the patch applies cleanly, the edited hunk will immediately be
+marked for discarding."),
checkout_nothead => N__(
-"# If the patch applies cleanly, the edited hunk will immediately be
-# marked for applying."),
+"If the patch applies cleanly, the edited hunk will immediately be
+marked for applying."),
);
sub edit_hunk_manually {
@@ -1068,21 +1068,22 @@ sub edit_hunk_manually {
my $fh;
open $fh, '>', $hunkfile
or die sprintf(__("failed to open hunk edit file for writing:
%s"), $!);
- print $fh __("# Manual hunk edit mode -- see bottom for a quick
guide\n");
+ print $fh Git::comment_lines __("Manual hunk edit mode -- see bottom
for a quick guide\n");
print $fh @$oldtext;
my $is_reverse = $patch_mode_flavour{IS_REVERSE};
my ($remove_plus, $remove_minus) = $is_reverse ? ('-', '+') : ('+',
'-');
- print $fh sprintf(__(
-"# ---
-# To remove '%s' lines, make them ' ' lines (context).
-# To remove '%s' lines, delete them.
-# Lines starting with # will be removed.
-#\n"), $remove_minus, $remove_plus),
-__($edit_hunk_manually_modes{$patch_mode}), __(
+ my $comment_line_char = Git::config("core.commentchar") || '#';
+ print $fh Git::comment_lines sprintf(__(
+"---
+To remove '%s' lines, make them ' ' lines (context).
+To remove '%s' lines, delete them.
+Lines starting with %s will be removed.
+\n"), $remove_minus, $remove_plus, $comment_line_char) .
+__($edit_hunk_manually_modes{$patch_mode}) ."\n". __(
# TRANSLATORS: 'it' refers to the patch mentioned in the previous messages.
-" If it does not apply cleanly, you will be given
-# an opportunity to edit again. If all lines of the hunk are removed,
-# then the edit is aborted and the hunk is left unchanged.\n");
+"If it does not apply cleanly, you will be given an opportunity to
+edit again. If all lines of the hunk are removed, then the edit is
+aborted and the hunk is left unchanged.\n");
close $fh;
chomp(my $editor = run_cmd_pipe(qw(git var GIT_EDITOR)));
@@ -1094,7 +1095,7 @@ __($edit_hunk_manually_modes{$patch_mode}), __(
open $fh, '<', $hunkfile
or die sprintf(__("failed to open hunk edit file for reading:
%s"), $!);
- my @newtext = grep { !/^#/ } <$fh>;
+ my @newtext = grep { !/^$comment_line_char/ } <$fh>;
close $fh;
unlink $hunkfile;
diff --git a/git-send-email.perl b/git-send-email.perl
index 5c01425..bbeb9fb 100755
--- a/git-send-email.perl
+++ b/git-send-email.perl
@@ -671,18 +671,20 @@ if ($compose) {
my $tpl_subject = $initial_subject || '';
my $tpl_reply_to = $initial_reply_to || '';
- print $c <<EOT;
+ print $c <<EOT1, Git::prefix_lines("GIT: ", __ <<EOT2), <<EOT3;
From $tpl_sender # This line is ignored.
-GIT: Lines beginning in "GIT:" will be removed.
-GIT: Consider including an overall diffstat or table of contents
-GIT: for the patch you are writing.
-GIT:
-GIT: Clear the body content if you don't wish to send a summary.
+EOT1
+Lines beginning in "GIT:" will be removed.
+Consider including an overall diffstat or table of contents
+for the patch you are writing.
+
+Clear the body content if you don't wish to send a summary.
+EOT2
From: $tpl_sender
Subject: $tpl_subject
In-Reply-To: $tpl_reply_to
-EOT
+EOT3
for my $f (@files) {
print $c get_patch_subject($f);
}
diff --git a/perl/Git.pm b/perl/Git.pm
index b273282..17be59f 100644
--- a/perl/Git.pm
+++ b/perl/Git.pm
@@ -1438,6 +1438,29 @@ sub END {
} # %TEMP_* Lexical Context
+=item prefix_lines ( PREFIX, STRING )
+
+Prefixes lines in C<STRING> with C<PREFIX>.
+
+=cut
+
+sub prefix_lines {
+ my ($prefix, $string) = @_;
+ $string =~ s/^/$prefix/mg;
+ return $string;
+}
+
+=item comment_lines ( STRING )
+
+Comments lines following core.commentchar configuration.
+
+=cut
+
+sub comment_lines {
+ my $comment_line_char = config("core.commentchar") || '#';
+ return prefix_lines("$comment_line_char ", @_);
+}
+
=back
=head1 ERROR HANDLING
diff --git a/perl/Git/I18N.pm b/perl/Git/I18N.pm
index 32c4568..c41425c 100644
--- a/perl/Git/I18N.pm
+++ b/perl/Git/I18N.pm
@@ -74,7 +74,7 @@ Git::I18N - Perl interface to Git's Gettext localizations
printf __("The following error occurred: %s\n"), $error;
- printf __n("commited %d file", "commited %d files", $files), $files;
+ printf __n("commited %d file\n", "commited %d files\n", $files), $files;
=head1 DESCRIPTION
@@ -95,12 +95,14 @@ L<Locale::Messages>'s gettext function if all goes well,
otherwise our
passthrough fallback function.
=head2 __n($$$)
+
L<Locale::Messages>'s ngettext function or passthrough fallback function.
=head2 N__($)
-No-op that only returns its argument. Use this if you want xgettext to
-extract the text to the pot template but do not want to trigger retrival of
-the translation at run time.
+
+No-operation that only returns its argument. Use this if you want xgettext to
+extract the text to the pot template but do not want to trigger retrival of the
+translation at run time.
=head1 AUTHOR
-- >8 --
--
2.11.0.rc0.23.g8236252
