tree 26fca6996c9b3fe89cf86864681adcffc62aac6c
parent 70db3d91a5228c98603c55fa06c87184a1f9f6db
author Russell King <[EMAIL PROTECTED]> Wed, 27 Jul 2005 11:35:54 +0100
committer Russell King <[EMAIL PROTECTED]> Wed, 27 Jul 2005 11:35:54 +0100

[SERIAL] Expose 8250_pci setup/removal/suspend/resume functions

Re-jig the setup/removal/suspend/resume of 8250 pci ports so that they
know slightly less about how they're attached to a PCI device.  Expose
this as the new interface for registering PCI serial ports, as well as
the pciserial_board structure and associated flag definitions.

Signed-off-by: Russell King <[EMAIL PROTECTED]>

 drivers/serial/8250_pci.c |  233 +++++++++++++++++++++++-----------------------
 include/linux/8250_pci.h  |   38 +++++++
 2 files changed, 159 insertions(+), 112 deletions(-)

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -34,38 +34,6 @@
 #undef SERIAL_DEBUG_PCI
 
 /*
- * Definitions for PCI support.
- */
-#define FL_BASE_MASK           0x0007
-#define FL_BASE0               0x0000
-#define FL_BASE1               0x0001
-#define FL_BASE2               0x0002
-#define FL_BASE3               0x0003
-#define FL_BASE4               0x0004
-#define FL_GET_BASE(x)         (x & FL_BASE_MASK)
-
-/* Use successive BARs (PCI base address registers),
-   else use offset into some specified BAR */
-#define FL_BASE_BARS           0x0008
-
-/* do not assign an irq */
-#define FL_NOIRQ               0x0080
-
-/* Use the Base address register size to cap number of ports */
-#define FL_REGION_SZ_CAP       0x0100
-
-struct pciserial_board {
-       unsigned int flags;
-       unsigned int num_ports;
-       unsigned int base_baud;
-       unsigned int uart_offset;
-       unsigned int reg_shift;
-       unsigned int first_offset;
-};
-
-struct serial_private;
-
-/*
  * init function returns:
  *  > 0 - number of ports
  *  = 0 - use board->num_ports
@@ -1528,60 +1496,14 @@ serial_pci_matches(struct pciserial_boar
            board->first_offset == guessed->first_offset;
 }
 
-/*
- * Probe one serial board.  Unfortunately, there is no rhyme nor reason
- * to the arrangement of serial ports on a PCI card.
- */
-static int __devinit
-pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+struct serial_private *
+pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
 {
        struct uart_port serial_port;
        struct serial_private *priv;
-       struct pciserial_board *board, tmp;
        struct pci_serial_quirk *quirk;
        int rc, nr_ports, i;
 
-       if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
-               printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
-                       ent->driver_data);
-               return -EINVAL;
-       }
-
-       board = &pci_boards[ent->driver_data];
-
-       rc = pci_enable_device(dev);
-       if (rc)
-               return rc;
-
-       if (ent->driver_data == pbn_default) {
-               /*
-                * Use a copy of the pci_board entry for this;
-                * avoid changing entries in the table.
-                */
-               memcpy(&tmp, board, sizeof(struct pciserial_board));
-               board = &tmp;
-
-               /*
-                * We matched one of our class entries.  Try to
-                * determine the parameters of this board.
-                */
-               rc = serial_pci_guess_board(dev, board);
-               if (rc)
-                       goto disable;
-       } else {
-               /*
-                * We matched an explicit entry.  If we are able to
-                * detect this boards settings with our heuristic,
-                * then we no longer need this entry.
-                */
-               memcpy(&tmp, &pci_boards[pbn_default],
-                      sizeof(struct pciserial_board));
-               rc = serial_pci_guess_board(dev, &tmp);
-               if (rc == 0 && serial_pci_matches(board, &tmp))
-                       moan_device("Redundant entry in serial pci_table.",
-                                   dev);
-       }
-
        nr_ports = board->num_ports;
 
        /*
@@ -1598,8 +1520,10 @@ pciserial_init_one(struct pci_dev *dev, 
         */
        if (quirk->init) {
                rc = quirk->init(dev);
-               if (rc < 0)
-                       goto disable;
+               if (rc < 0) {
+                       priv = ERR_PTR(rc);
+                       goto err_out;
+               }
                if (rc)
                        nr_ports = rc;
        }
@@ -1608,8 +1532,8 @@ pciserial_init_one(struct pci_dev *dev, 
                       sizeof(unsigned int) * nr_ports,
                       GFP_KERNEL);
        if (!priv) {
-               rc = -ENOMEM;
-               goto deinit;
+               priv = ERR_PTR(-ENOMEM);
+               goto err_deinit;
        }
 
        memset(priv, 0, sizeof(struct serial_private) +
@@ -1617,7 +1541,6 @@ pciserial_init_one(struct pci_dev *dev, 
 
        priv->dev = dev;
        priv->quirk = quirk;
-       pci_set_drvdata(dev, priv);
 
        memset(&serial_port, 0, sizeof(struct uart_port));
        serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
@@ -1643,24 +1566,21 @@ pciserial_init_one(struct pci_dev *dev, 
 
        priv->nr = i;
 
-       return 0;
+       return priv;
 
- deinit:
+ err_deinit:
        if (quirk->exit)
                quirk->exit(dev);
- disable:
-       pci_disable_device(dev);
-       return rc;
+ err_out:
+       return priv;
 }
+EXPORT_SYMBOL_GPL(pciserial_init_ports);
 
-static void __devexit pciserial_remove_one(struct pci_dev *dev)
+void pciserial_remove_ports(struct serial_private *priv)
 {
-       struct serial_private *priv = pci_get_drvdata(dev);
        struct pci_serial_quirk *quirk;
        int i;
 
-       pci_set_drvdata(dev, NULL);
-
        for (i = 0; i < priv->nr; i++)
                serial8250_unregister_port(priv->line[i]);
 
@@ -1673,25 +1593,123 @@ static void __devexit pciserial_remove_o
        /*
         * Find the exit quirks.
         */
-       quirk = find_quirk(dev);
+       quirk = find_quirk(priv->dev);
        if (quirk->exit)
-               quirk->exit(dev);
+               quirk->exit(priv->dev);
+
+       kfree(priv);
+}
+EXPORT_SYMBOL_GPL(pciserial_remove_ports);
+
+void pciserial_suspend_ports(struct serial_private *priv)
+{
+       int i;
+
+       for (i = 0; i < priv->nr; i++)
+               if (priv->line[i] >= 0)
+                       serial8250_suspend_port(priv->line[i]);
+}
+EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
+
+void pciserial_resume_ports(struct serial_private *priv)
+{
+       int i;
+
+       /*
+        * Ensure that the board is correctly configured.
+        */
+       if (priv->quirk->init)
+               priv->quirk->init(priv->dev);
+
+       for (i = 0; i < priv->nr; i++)
+               if (priv->line[i] >= 0)
+                       serial8250_resume_port(priv->line[i]);
+}
+EXPORT_SYMBOL_GPL(pciserial_resume_ports);
+
+/*
+ * Probe one serial board.  Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int __devinit
+pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+       struct serial_private *priv;
+       struct pciserial_board *board, tmp;
+       int rc;
+
+       if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
+               printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
+                       ent->driver_data);
+               return -EINVAL;
+       }
+
+       board = &pci_boards[ent->driver_data];
+
+       rc = pci_enable_device(dev);
+       if (rc)
+               return rc;
+
+       if (ent->driver_data == pbn_default) {
+               /*
+                * Use a copy of the pci_board entry for this;
+                * avoid changing entries in the table.
+                */
+               memcpy(&tmp, board, sizeof(struct pciserial_board));
+               board = &tmp;
+
+               /*
+                * We matched one of our class entries.  Try to
+                * determine the parameters of this board.
+                */
+               rc = serial_pci_guess_board(dev, board);
+               if (rc)
+                       goto disable;
+       } else {
+               /*
+                * We matched an explicit entry.  If we are able to
+                * detect this boards settings with our heuristic,
+                * then we no longer need this entry.
+                */
+               memcpy(&tmp, &pci_boards[pbn_default],
+                      sizeof(struct pciserial_board));
+               rc = serial_pci_guess_board(dev, &tmp);
+               if (rc == 0 && serial_pci_matches(board, &tmp))
+                       moan_device("Redundant entry in serial pci_table.",
+                                   dev);
+       }
+
+       priv = pciserial_init_ports(dev, board);
+       if (!IS_ERR(priv)) {
+               pci_set_drvdata(dev, priv);
+               return 0;
+       }
+
+       rc = PTR_ERR(priv);
 
+ disable:
        pci_disable_device(dev);
+       return rc;
+}
 
-       kfree(priv);
+static void __devexit pciserial_remove_one(struct pci_dev *dev)
+{
+       struct serial_private *priv = pci_get_drvdata(dev);
+
+       pci_set_drvdata(dev, NULL);
+
+       pciserial_remove_ports(priv);
+
+       pci_disable_device(dev);
 }
 
 static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
 {
        struct serial_private *priv = pci_get_drvdata(dev);
 
-       if (priv) {
-               int i;
+       if (priv)
+               pciserial_suspend_ports(priv);
 
-               for (i = 0; i < priv->nr; i++)
-                       serial8250_suspend_port(priv->line[i]);
-       }
        pci_save_state(dev);
        pci_set_power_state(dev, pci_choose_state(dev, state));
        return 0;
@@ -1705,21 +1723,12 @@ static int pciserial_resume_one(struct p
        pci_restore_state(dev);
 
        if (priv) {
-               int i;
-
                /*
                 * The device may have been disabled.  Re-enable it.
                 */
                pci_enable_device(dev);
 
-               /*
-                * Ensure that the board is correctly configured.
-                */
-               if (priv->quirk->init)
-                       priv->quirk->init(dev);
-
-               for (i = 0; i < priv->nr; i++)
-                       serial8250_resume_port(priv->line[i]);
+               pciserial_resume_ports(priv);
        }
        return 0;
 }
diff --git a/include/linux/8250_pci.h b/include/linux/8250_pci.h
--- a/include/linux/8250_pci.h
+++ b/include/linux/8250_pci.h
@@ -1,2 +1,40 @@
+/*
+ * Definitions for PCI support.
+ */
+#define FL_BASE_MASK           0x0007
+#define FL_BASE0               0x0000
+#define FL_BASE1               0x0001
+#define FL_BASE2               0x0002
+#define FL_BASE3               0x0003
+#define FL_BASE4               0x0004
+#define FL_GET_BASE(x)         (x & FL_BASE_MASK)
+
+/* Use successive BARs (PCI base address registers),
+   else use offset into some specified BAR */
+#define FL_BASE_BARS           0x0008
+
+/* do not assign an irq */
+#define FL_NOIRQ               0x0080
+
+/* Use the Base address register size to cap number of ports */
+#define FL_REGION_SZ_CAP       0x0100
+
+struct pciserial_board {
+       unsigned int flags;
+       unsigned int num_ports;
+       unsigned int base_baud;
+       unsigned int uart_offset;
+       unsigned int reg_shift;
+       unsigned int first_offset;
+};
+
+struct serial_private;
+
+struct serial_private *
+pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board);
+void pciserial_remove_ports(struct serial_private *priv);
+void pciserial_suspend_ports(struct serial_private *priv);
+void pciserial_resume_ports(struct serial_private *priv);
+
 int pci_siig10x_fn(struct pci_dev *dev, int enable);
 int pci_siig20x_fn(struct pci_dev *dev, int enable);
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to