tree 48e3407b76918314af13b7f38f4a3d2813f11fe8
parent 293da76b3d4c2f362f906bce8c5d2e053bdf8d44
author Frank Rowand <[EMAIL PROTECTED]> Wed, 29 Jun 2005 06:48:04 -0700
committer Paul Mackerras <[EMAIL PROTECTED]> Mon, 29 Aug 2005 10:53:32 +1000

[PATCH] ppc64: change duplicate Kconfig menu "General setup" to "Bus Options"

arch/ppc64/Kconfig defines a "General setup" menu, but also sources
init/Kconfig which also defines a "General setup" menu.  Both of these
menus appear at the top level of make menuconfig.  Having two menus with
the same name is confusing.  This patch renames the ppc64/Kconfig menu to
be "Bus Options" and moves options in this menu which are not bus related
to the end of the "Platform support" menu.

There are many variations among architectures on the exact naming of the
"Bus Options" menu.  I chose to use the simplest one, which is also used
in arch/ppc/Kconfig.

Signed-off-by: Frank Rowand <[EMAIL PROTECTED]>
Signed-off-by: Paul Mackerras <[EMAIL PROTECTED]>

 arch/ppc64/Kconfig |   68 ++++++++++++++++++++++++++---------------------------
 1 files changed, 34 insertions(+), 34 deletions(-)

diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig
--- a/arch/ppc64/Kconfig
+++ b/arch/ppc64/Kconfig
@@ -350,13 +350,46 @@ config SECCOMP
 
          If unsure, say Y. Only embedded should say N here.
 
+source "fs/Kconfig.binfmt"
+
+config HOTPLUG_CPU
+       bool "Support for hot-pluggable CPUs"
+       depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+       select HOTPLUG
+       ---help---
+         Say Y here to be able to turn CPUs off and on.
+
+         Say N if you are unsure.
+
+config PROC_DEVICETREE
+       bool "Support for Open Firmware device tree in /proc"
+       depends on !PPC_ISERIES
+       help
+         This option adds a device-tree directory under /proc which contains
+         an image of the device tree that the kernel copies from Open
+         Firmware. If unsure, say Y here.
+
+config CMDLINE_BOOL
+       bool "Default bootloader kernel arguments"
+       depends on !PPC_ISERIES
+
+config CMDLINE
+       string "Initial kernel command string"
+       depends on CMDLINE_BOOL
+       default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
+       help
+         On some platforms, there is currently no way for the boot loader to
+         pass arguments to the kernel. For these platforms, you can supply
+         some command-line options at build time by entering them here.  In
+         most cases you will need to specify the root device here.
+
 endmenu
 
 config ISA_DMA_API
        bool
        default y
 
-menu "General setup"
+menu "Bus Options"
 
 config ISA
        bool
@@ -389,45 +422,12 @@ config PCI_DOMAINS
        bool
        default PCI
 
-source "fs/Kconfig.binfmt"
-
 source "drivers/pci/Kconfig"
 
-config HOTPLUG_CPU
-       bool "Support for hot-pluggable CPUs"
-       depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
-       select HOTPLUG
-       ---help---
-         Say Y here to be able to turn CPUs off and on.
-
-         Say N if you are unsure.
-
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
 
-config PROC_DEVICETREE
-       bool "Support for Open Firmware device tree in /proc"
-       depends on !PPC_ISERIES
-       help
-         This option adds a device-tree directory under /proc which contains
-         an image of the device tree that the kernel copies from Open
-         Firmware. If unsure, say Y here.
-
-config CMDLINE_BOOL
-       bool "Default bootloader kernel arguments"
-       depends on !PPC_ISERIES
-
-config CMDLINE
-       string "Initial kernel command string"
-       depends on CMDLINE_BOOL
-       default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
-       help
-         On some platforms, there is currently no way for the boot loader to
-         pass arguments to the kernel. For these platforms, you can supply
-         some command-line options at build time by entering them here.  In
-         most cases you will need to specify the root device here.
-
 endmenu
 
 source "net/Kconfig"
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to