tree 15c05e097ad2446d78b5ec56acb7b9a7783e9a29
parent 7dfe508a821adf180beafa29761b4a303536d67b
author Richard Purdie <[EMAIL PROTECTED]> Wed, 07 Sep 2005 17:24:35 +0100
committer Russell King <[EMAIL PROTECTED]> Wed, 07 Sep 2005 17:24:35 +0100

[ARM] 2883/1: PXA Sharpsl: Add detection of new PXA based Zaurii machine types

Patch from Richard Purdie

Add machine detection routines for several new models of PXA based Zaurii
(SL-C3000 - Spitz, SL-C1000 - Akita, SL-C3100 - Borzoi, SL-C6000 - Tosa).
Sharp continue to use broken bootloaders in ROM.

Signed-off-by: Richard Purdie <[EMAIL PROTECTED]>
Signed-off-by: Russell King <[EMAIL PROTECTED]>

 arch/arm/boot/compressed/head-sharpsl.S |  113 ++++++++++++++++++++++++--------
 1 files changed, 86 insertions(+), 27 deletions(-)

diff --git a/arch/arm/boot/compressed/head-sharpsl.S 
b/arch/arm/boot/compressed/head-sharpsl.S
--- a/arch/arm/boot/compressed/head-sharpsl.S
+++ b/arch/arm/boot/compressed/head-sharpsl.S
@@ -7,7 +7,8 @@
  * so we have to figure out the machine for ourselves...
  *
  * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
- * and Husky (SL-C760).
+ * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000),
+ * Akita (SL-C1000) and Borzoi (SL-C3100).
  *
  */
 
@@ -23,6 +24,22 @@
 
 __SharpSL_start:
 
+/* Check for TC6393 - if found we have a Tosa */
+       ldr     r7, .TOSAID
+       mov     r1, #0x10000000         @ Base address of TC6393 chip
+       mov     r6, #0x03
+       ldrh    r3, [r1, #8]            @ Load TC6393XB Revison: This is 0x0003
+       cmp     r6, r3
+       beq     .SHARPEND               @ Success -> tosa
+
+/* Check for pxa270 - if found, branch */
+       mrc p15, 0, r4, c0, c0          @ Get Processor ID
+       and     r4, r4, #0xffffff00
+       ldr     r3, .PXA270ID
+       cmp     r4, r3
+       beq     .PXA270
+
+/* Check for w100 - if not found we have a Poodle */
        ldr     r1, .W100ADDR           @ Base address of w100 chip + regs 
offset
 
        mov r6, #0x31                   @ Load Magic Init value
@@ -30,7 +47,7 @@ __SharpSL_start:
        mov r5, #0x3000
 .W100LOOP:
        subs r5, r5, #1
-    bne .W100LOOP
+       bne .W100LOOP
        mov r6, #0x30                   @ Load 2nd Magic Init value
        str     r6, [r1, #0x280]        @ to SCRATCH_UMSK
 
@@ -40,45 +57,52 @@ __SharpSL_start:
        cmp     r6, r3
        bne     .SHARPEND                       @ We have no w100 - Poodle
 
-       mrc p15, 0, r6, c0, c0  @ Get Processor ID
-       and     r6, r6, #0xffffff00
+/* Check for pxa250 - if found we have a Corgi */
        ldr     r7, .CORGIID
        ldr     r3, .PXA255ID
-       cmp     r6, r3
+       cmp     r4, r3
        blo     .SHARPEND                       @ We have a PXA250 - Corgi
 
-       mov     r1, #0x0c000000         @ Base address of NAND chip
-       ldrb    r3, [r1, #24]   @ Load FLASHCTL
-       bic     r3, r3, #0x11           @ SET NCE
-       orr     r3, r3, #0x0a           @ SET CLR + FLWP
-       strb    r3, [r1, #24]   @ Save to FLASHCTL
-       mov     r2, #0x90               @ Command "readid"
-       strb    r2, [r1, #20]   @ Save to FLASHIO
-       bic     r3, r3, #2                      @ CLR CLE
-       orr     r3, r3, #4                      @ SET ALE
-       strb    r3, [r1, #24]   @ Save to FLASHCTL
-       mov             r2, #0                  @ Address 0x00
-       strb    r2, [r1, #20]   @ Save to FLASHIO
-       bic     r3, r3, #4                      @ CLR ALE
-       strb    r3, [r1, #24]   @ Save to FLASHCTL
-.SHARP1:
-       ldrb    r3, [r1, #24]   @ Load FLASHCTL
-       tst     r3, #32                         @ Is chip ready?
-       beq     .SHARP1
-       ldrb    r2, [r1, #20]   @ NAND Manufacturer ID
-       ldrb    r3, [r1, #20]   @ NAND Chip ID
+/* Check for 64MiB flash - if found we have a Shepherd */
+       bl      get_flash_ids
        ldr     r7, .SHEPHERDID
        cmp     r3, #0x76                       @ 64MiB flash
        beq     .SHARPEND                       @ We have Shepherd
+
+/* Must be a Husky */
        ldr     r7, .HUSKYID            @ Must be Husky
        b .SHARPEND
 
+.PXA270:
+/* Check for 16MiB flash - if found we have Spitz */
+       bl      get_flash_ids
+       ldr     r7, .SPITZID
+       cmp     r3, #0x73                       @ 16MiB flash
+       beq     .SHARPEND                       @ We have Spitz
+
+/* Check for a second SCOOP chip - if found we have Borzoi */
+       ldr     r1, .SCOOP2ADDR
+       ldr     r7, .BORZOIID
+       mov     r6, #0x0140
+       strh    r6, [r1]
+       ldrh    r6, [r1]
+       cmp     r6, #0x0140
+       beq     .SHARPEND                       @ We have Borzoi
+
+/* Must be Akita */
+       ldr     r7, .AKITAID
+       b       .SHARPEND                       @ We have Borzoi
+
 .PXA255ID:
        .word   0x69052d00              @ PXA255 Processor ID
+.PXA270ID:
+       .word   0x69054100              @ PXA270 Processor ID
 .W100ID:
        .word   0x57411002              @ w100 Chip ID
 .W100ADDR:
        .word   0x08010000              @ w100 Chip ID Reg Address
+.SCOOP2ADDR:
+       .word   0x08800040
 .POODLEID:
        .word   MACH_TYPE_POODLE
 .CORGIID:
@@ -87,6 +111,41 @@ __SharpSL_start:
        .word   MACH_TYPE_SHEPHERD
 .HUSKYID:
        .word   MACH_TYPE_HUSKY
-.SHARPEND:
-
+.TOSAID:
+       .word   MACH_TYPE_TOSA
+.SPITZID:
+       .word   MACH_TYPE_SPITZ
+.AKITAID:
+       .word   MACH_TYPE_AKITA
+.BORZOIID:
+       .word   MACH_TYPE_BORZOI
+
+/*
+ * Return: r2 - NAND Manufacturer ID
+ *         r3 - NAND Chip ID
+ * Corrupts: r1
+ */
+get_flash_ids:
+       mov     r1, #0x0c000000         @ Base address of NAND chip
+       ldrb    r3, [r1, #24]           @ Load FLASHCTL
+       bic     r3, r3, #0x11           @ SET NCE
+       orr     r3, r3, #0x0a           @ SET CLR + FLWP
+       strb    r3, [r1, #24]           @ Save to FLASHCTL
+       mov     r2, #0x90               @ Command "readid"
+       strb    r2, [r1, #20]           @ Save to FLASHIO
+       bic     r3, r3, #2              @ CLR CLE
+       orr     r3, r3, #4              @ SET ALE
+       strb    r3, [r1, #24]           @ Save to FLASHCTL
+       mov     r2, #0                  @ Address 0x00
+       strb    r2, [r1, #20]           @ Save to FLASHIO
+       bic     r3, r3, #4              @ CLR ALE
+       strb    r3, [r1, #24]           @ Save to FLASHCTL
+.fids1:
+       ldrb    r3, [r1, #24]           @ Load FLASHCTL
+       tst     r3, #32                 @ Is chip ready?
+       beq     .fids1
+       ldrb    r2, [r1, #20]           @ NAND Manufacturer ID
+       ldrb    r3, [r1, #20]           @ NAND Chip ID
+       mov     pc, lr
 
+.SHARPEND:
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to