Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2c8dc071517ec2843869024dc82be2e246f41064
Commit:     2c8dc071517ec2843869024dc82be2e246f41064
Parent:     15e3589e59c35ed33823dda3d38ad171222b83b4
Author:     David Brownell <[EMAIL PROTECTED]>
AuthorDate: Thu Jan 18 00:45:48 2007 -0500
Committer:  Dmitry Torokhov <[EMAIL PROTECTED]>
CommitDate: Thu Jan 18 00:45:48 2007 -0500

    Input: ads7846 - be more compatible with the hwmon framework
    
     - Hook up to hwmon
         * show sensor attributes only if hwmon is present
         * ... and the board's reference voltage is known
         * otherwise be just a touchscreen
     - Report voltages per hwmon convention
         * measure in millivolts
         * voltages are named in[0-8]_input (ugh)
         * for 7846 chips, properly range-adjust vBATT/in1_input
    
    Battery measurements help during recharge monitoring.  On OSK/Mistral,
    the measured voltage agreed with a multimeter to several decimal places.
    
    Signed-off-by: David Brownell <[EMAIL PROTECTED]>
    Signed-off-by: Dmitry Torokhov <[EMAIL PROTECTED]>
---
 drivers/input/touchscreen/Kconfig   |    9 +-
 drivers/input/touchscreen/ads7846.c |  306 +++++++++++++++++++++++++----------
 2 files changed, 224 insertions(+), 91 deletions(-)

diff --git a/drivers/input/touchscreen/Kconfig 
b/drivers/input/touchscreen/Kconfig
index 29ca0ab..4bec842 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -12,13 +12,18 @@ menuconfig INPUT_TOUCHSCREEN
 if INPUT_TOUCHSCREEN
 
 config TOUCHSCREEN_ADS7846
-       tristate "ADS 7846 based touchscreens"
+       tristate "ADS 7846/7843 based touchscreens"
        depends on SPI_MASTER
+       depends on HWMON = n || HWMON
        help
          Say Y here if you have a touchscreen interface using the
-         ADS7846 controller, and your board-specific initialization
+         ADS7846 or ADS7843 controller, and your board-specific setup
          code includes that in its table of SPI devices.
 
+         If HWMON is selected, and the driver is told the reference voltage
+         on your board, you will also get hwmon interfaces for the voltage
+         (and on ads7846, temperature) sensors of this chip.
+
          If unsure, say N (but it's safe to say "Y").
 
          To compile this driver as a module, choose M here: the
diff --git a/drivers/input/touchscreen/ads7846.c 
b/drivers/input/touchscreen/ads7846.c
index b18c63a..cd251ef 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -17,8 +17,9 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-#include <linux/device.h>
+#include <linux/hwmon.h>
 #include <linux/init.h>
+#include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
@@ -69,7 +70,7 @@ struct ts_event {
        u16     x;
        u16     y;
        u16     z1, z2;
-       int    ignore;
+       int     ignore;
 };
 
 struct ads7846 {
@@ -77,7 +78,12 @@ struct ads7846 {
        char                    phys[32];
 
        struct spi_device       *spi;
+
+#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
        struct attribute_group  *attr_group;
+       struct class_device     *hwmon;
+#endif
+
        u16                     model;
        u16                     vref_delay_usecs;
        u16                     x_plate_ohms;
@@ -170,7 +176,12 @@ struct ads7846 {
 
 /*
  * Non-touchscreen sensors only use single-ended conversions.
+ * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
+ * ads7846 lets that pin be unconnected, to use internal vREF.
  */
+static unsigned vREF_mV;
+module_param(vREF_mV, uint, 0);
+MODULE_PARM_DESC(vREF_mV, "external vREF voltage, in milliVolts");
 
 struct ser_req {
        u8                      ref_on;
@@ -198,50 +209,55 @@ static int ads7846_read12_ser(struct device *dev, 
unsigned command)
        struct ser_req          *req = kzalloc(sizeof *req, GFP_KERNEL);
        int                     status;
        int                     sample;
-       int                     i;
+       int                     use_internal;
 
        if (!req)
                return -ENOMEM;
 
        spi_message_init(&req->msg);
 
-       /* activate reference, so it has time to settle; */
-       req->ref_on = REF_ON;
-       req->xfer[0].tx_buf = &req->ref_on;
-       req->xfer[0].len = 1;
-       req->xfer[1].rx_buf = &req->scratch;
-       req->xfer[1].len = 2;
-
-       /*
-        * for external VREF, 0 usec (and assume it's always on);
-        * for 1uF, use 800 usec;
-        * no cap, 100 usec.
-        */
-       req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+       /* FIXME boards with ads7846 might use external vref instead ... */
+       use_internal = (ts->model == 7846);
+
+       /* maybe turn on internal vREF, and let it settle */
+       if (use_internal) {
+               req->ref_on = REF_ON;
+               req->xfer[0].tx_buf = &req->ref_on;
+               req->xfer[0].len = 1;
+               spi_message_add_tail(&req->xfer[0], &req->msg);
+
+               req->xfer[1].rx_buf = &req->scratch;
+               req->xfer[1].len = 2;
+
+               /* for 1uF, settle for 800 usec; no cap, 100 usec.  */
+               req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+               spi_message_add_tail(&req->xfer[1], &req->msg);
+       }
 
        /* take sample */
        req->command = (u8) command;
        req->xfer[2].tx_buf = &req->command;
        req->xfer[2].len = 1;
+       spi_message_add_tail(&req->xfer[2], &req->msg);
+
        req->xfer[3].rx_buf = &req->sample;
        req->xfer[3].len = 2;
+       spi_message_add_tail(&req->xfer[3], &req->msg);
 
        /* REVISIT:  take a few more samples, and compare ... */
 
-       /* turn off reference */
-       req->ref_off = REF_OFF;
-       req->xfer[4].tx_buf = &req->ref_off;
-       req->xfer[4].len = 1;
-       req->xfer[5].rx_buf = &req->scratch;
-       req->xfer[5].len = 2;
-
-       CS_CHANGE(req->xfer[5]);
-
-       /* group all the transfers together, so we can't interfere with
-        * reading touchscreen state; disable penirq while sampling
-        */
-       for (i = 0; i < 6; i++)
-               spi_message_add_tail(&req->xfer[i], &req->msg);
+       /* maybe off internal vREF */
+       if (use_internal) {
+               req->ref_off = REF_OFF;
+               req->xfer[4].tx_buf = &req->ref_off;
+               req->xfer[4].len = 1;
+               spi_message_add_tail(&req->xfer[4], &req->msg);
+
+               req->xfer[5].rx_buf = &req->scratch;
+               req->xfer[5].len = 2;
+               CS_CHANGE(req->xfer[5]);
+               spi_message_add_tail(&req->xfer[5], &req->msg);
+       }
 
        ts->irq_disabled = 1;
        disable_irq(spi->irq);
@@ -261,25 +277,173 @@ static int ads7846_read12_ser(struct device *dev, 
unsigned command)
        return status ? status : sample;
 }
 
-#define SHOW(name) static ssize_t \
+#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
+
+#define SHOW(name, var, adjust) static ssize_t \
 name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
 { \
+       struct ads7846 *ts = dev_get_drvdata(dev); \
        ssize_t v = ads7846_read12_ser(dev, \
-                       READ_12BIT_SER(name) | ADS_PD10_ALL_ON); \
+                       READ_12BIT_SER(var) | ADS_PD10_ALL_ON); \
        if (v < 0) \
                return v; \
-       return sprintf(buf, "%u\n", (unsigned) v); \
+       return sprintf(buf, "%u\n", adjust(ts, v)); \
 } \
 static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
 
-SHOW(temp0)
-SHOW(temp1)
-SHOW(vaux)
-SHOW(vbatt)
+
+/* Sysfs conventions report temperatures in millidegrees Celcius.
+ * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high
+ * accuracy scheme without calibration data.  For now we won't try either;
+ * userspace sees raw sensor values, and must scale/calibrate appropriately.
+ */
+static inline unsigned null_adjust(struct ads7846 *ts, ssize_t v)
+{
+       return v;
+}
+
+SHOW(temp0, temp0, null_adjust)                /* temp1_input */
+SHOW(temp1, temp1, null_adjust)                /* temp2_input */
+
+
+/* sysfs conventions report voltages in millivolts.  We can convert voltages
+ * if we know vREF.  userspace may need to scale vAUX to match the board's
+ * external resistors; we assume that vBATT only uses the internal ones.
+ */
+static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
+{
+       unsigned retval = v;
+
+       /* external resistors may scale vAUX into 0..vREF */
+       retval *= vREF_mV;
+       retval = retval >> 12;
+       return retval;
+}
+
+static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
+{
+       unsigned retval = vaux_adjust(ts, v);
+
+       /* ads7846 has a resistor ladder to scale this signal down */
+       if (ts->model == 7846)
+               retval *= 4;
+       return retval;
+}
+
+SHOW(in0_input, vaux, vaux_adjust)
+SHOW(in1_input, vbatt, vbatt_adjust)
+
+
+static struct attribute *ads7846_attributes[] = {
+       &dev_attr_temp0.attr,
+       &dev_attr_temp1.attr,
+       &dev_attr_in0_input.attr,
+       &dev_attr_in1_input.attr,
+       NULL,
+};
+
+static struct attribute_group ads7846_attr_group = {
+       .attrs = ads7846_attributes,
+};
+
+static struct attribute *ads7843_attributes[] = {
+       &dev_attr_in0_input.attr,
+       &dev_attr_in1_input.attr,
+       NULL,
+};
+
+static struct attribute_group ads7843_attr_group = {
+       .attrs = ads7843_attributes,
+};
+
+static struct attribute *ads7845_attributes[] = {
+       &dev_attr_in0_input.attr,
+       NULL,
+};
+
+static struct attribute_group ads7845_attr_group = {
+       .attrs = ads7845_attributes,
+};
+
+static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
+{
+       struct class_device *hwmon;
+       int err;
+
+       /* hwmon sensors need a reference voltage */
+       switch (ts->model) {
+       case 7846:
+               if (!vREF_mV) {
+                       dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
+                       vREF_mV = 2500;
+               }
+               break;
+       case 7845:
+       case 7843:
+               if (!vREF_mV) {
+                       dev_warn(&spi->dev,
+                               "external vREF for ADS%d not specified\n",
+                               ts->model);
+                       return 0;
+               }
+               break;
+       }
+
+       /* different chips have different sensor groups */
+       switch (ts->model) {
+       case 7846:
+               ts->attr_group = &ads7846_attr_group;
+               break;
+       case 7845:
+               ts->attr_group = &ads7845_attr_group;
+               break;
+       case 7843:
+               ts->attr_group = &ads7843_attr_group;
+               break;
+       default:
+               dev_dbg(&spi->dev, "ADS%d not recognized\n", ts->model);
+               return 0;
+       }
+
+       err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
+       if (err)
+               return err;
+
+       hwmon = hwmon_device_register(&spi->dev);
+       if (IS_ERR(hwmon)) {
+               sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+               return PTR_ERR(hwmon);
+       }
+
+       ts->hwmon = hwmon;
+       return 0;
+}
+
+static void ads784x_hwmon_unregister(struct spi_device *spi,
+                                    struct ads7846 *ts)
+{
+       if (ts->hwmon) {
+               sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+               hwmon_device_unregister(ts->hwmon);
+       }
+}
+
+#else
+static inline int ads784x_hwmon_register(struct spi_device *spi,
+                                        struct ads7846 *ts)
+{
+       return 0;
+}
+
+static inline void ads784x_hwmon_unregister(struct spi_device *spi,
+                                           struct ads7846 *ts)
+{
+}
+#endif
 
 static int is_pen_down(struct device *dev)
 {
-       struct ads7846          *ts = dev_get_drvdata(dev);
+       struct ads7846  *ts = dev_get_drvdata(dev);
 
        return ts->pendown;
 }
@@ -323,46 +487,14 @@ static ssize_t ads7846_disable_store(struct device *dev,
 
 static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
 
-static struct attribute *ads7846_attributes[] = {
-       &dev_attr_temp0.attr,
-       &dev_attr_temp1.attr,
-       &dev_attr_vbatt.attr,
-       &dev_attr_vaux.attr,
-       &dev_attr_pen_down.attr,
-       &dev_attr_disable.attr,
-       NULL,
-};
-
-static struct attribute_group ads7846_attr_group = {
-       .attrs = ads7846_attributes,
-};
-
-/*
- * ads7843/7845 don't have temperature sensors, and
- * use the other sensors a bit differently too
- */
-
-static struct attribute *ads7843_attributes[] = {
-       &dev_attr_vbatt.attr,
-       &dev_attr_vaux.attr,
+static struct attribute *ads784x_attributes[] = {
        &dev_attr_pen_down.attr,
        &dev_attr_disable.attr,
        NULL,
 };
 
-static struct attribute_group ads7843_attr_group = {
-       .attrs = ads7843_attributes,
-};
-
-static struct attribute *ads7845_attributes[] = {
-       &dev_attr_vaux.attr,
-       &dev_attr_pen_down.attr,
-       &dev_attr_disable.attr,
-       NULL,
-};
-
-static struct attribute_group ads7845_attr_group = {
-       .attrs = ads7845_attributes,
+static struct attribute_group ads784x_attr_group = {
+       .attrs = ads784x_attributes,
 };
 
 /*--------------------------------------------------------------------------*/
@@ -886,28 +1018,21 @@ static int __devinit ads7846_probe(struct spi_device 
*spi)
                goto err_cleanup_filter;
        }
 
+       err = ads784x_hwmon_register(spi, ts);
+       if (err)
+               goto err_free_irq;
+
        dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
 
-       /* take a first sample, leaving nPENIRQ active; avoid
+       /* take a first sample, leaving nPENIRQ active and vREF off; avoid
         * the touchscreen, in case it's not connected.
         */
        (void) ads7846_read12_ser(&spi->dev,
                          READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
 
-       switch (ts->model) {
-       case 7846:
-               ts->attr_group = &ads7846_attr_group;
-               break;
-       case 7845:
-               ts->attr_group = &ads7845_attr_group;
-               break;
-       default:
-               ts->attr_group = &ads7843_attr_group;
-               break;
-       }
-       err = sysfs_create_group(&spi->dev.kobj, ts->attr_group);
+       err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
        if (err)
-               goto err_free_irq;
+               goto err_remove_hwmon;
 
        err = input_register_device(input_dev);
        if (err)
@@ -916,7 +1041,9 @@ static int __devinit ads7846_probe(struct spi_device *spi)
        return 0;
 
  err_remove_attr_group:
-       sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+       sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
+ err_remove_hwmon:
+       ads784x_hwmon_unregister(spi, ts);
  err_free_irq:
        free_irq(spi->irq, ts);
  err_cleanup_filter:
@@ -932,11 +1059,12 @@ static int __devexit ads7846_remove(struct spi_device 
*spi)
 {
        struct ads7846          *ts = dev_get_drvdata(&spi->dev);
 
+       ads784x_hwmon_unregister(spi, ts);
        input_unregister_device(ts->input);
 
        ads7846_suspend(spi, PMSG_SUSPEND);
 
-       sysfs_remove_group(&spi->dev.kobj, ts->attr_group);
+       sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
 
        free_irq(ts->spi->irq, ts);
        /* suspend left the IRQ disabled */
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to