Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=41d8ca452f523b9245704c7dd8ef290fa7b78e6b
Commit:     41d8ca452f523b9245704c7dd8ef290fa7b78e6b
Parent:     23cebe2287474720c2eb0673581056cfb285a69f
Author:     Haavard Skinnemoen <[EMAIL PROTECTED]>
AuthorDate: Fri Feb 16 13:56:11 2007 +0100
Committer:  Haavard Skinnemoen <[EMAIL PROTECTED]>
CommitDate: Fri Feb 16 14:01:40 2007 +0100

    [AVR32] Use per-controller spi_board_info structures
    
    Set up one spi_board_info array per controller and pass this to
    at32_add_device_spi so that it can set up any GPIO pins for chip
    selects based on this information.
    
    Extracted from a patch by David Brownell and adapted slightly.
    
    Signed-off-by: Haavard Skinnemoen <[EMAIL PROTECTED]>
---
 arch/avr32/boards/atstk1000/atstk1002.c |    9 ++---
 arch/avr32/mach-at32ap/at32ap7000.c     |   55 +++++++++++++++++++++---------
 include/asm-avr32/arch-at32ap/board.h   |    4 ++-
 3 files changed, 44 insertions(+), 24 deletions(-)

diff --git a/arch/avr32/boards/atstk1000/atstk1002.c 
b/arch/avr32/boards/atstk1000/atstk1002.c
index d47e39f..5974768 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -8,7 +8,6 @@
  * published by the Free Software Foundation.
  */
 #include <linux/clk.h>
-#include <linux/device.h>
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -36,12 +35,11 @@ static struct eth_addr __initdata hw_addr[2];
 static struct eth_platform_data __initdata eth_data[2];
 extern struct lcdc_platform_data atstk1000_fb0_data;
 
-static struct spi_board_info spi_board_info[] __initdata = {
+static struct spi_board_info spi0_board_info[] __initdata = {
        {
+               /* QVGA display */
                .modalias       = "ltv350qv",
-               .controller_data = (void *)GPIO_PIN_PA(4),
                .max_speed_hz   = 16000000,
-               .bus_num        = 0,
                .chip_select    = 1,
        },
 };
@@ -149,8 +147,7 @@ static int __init atstk1002_init(void)
 
        set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
 
-       spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-       at32_add_device_spi(0);
+       at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
        at32_add_device_lcdc(0, &atstk1000_fb0_data);
 
        return 0;
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c 
b/arch/avr32/mach-at32ap/at32ap7000.c
index a5037aa..bc23550 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -8,6 +8,7 @@
 #include <linux/clk.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/io.h>
 
@@ -751,8 +752,41 @@ static struct resource atmel_spi1_resource[] = {
 DEFINE_DEV(atmel_spi, 1);
 DEV_CLK(spi_clk, atmel_spi1, pba, 1);
 
-struct platform_device *__init at32_add_device_spi(unsigned int id)
+static void
+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+                     unsigned int n, const u8 *pins)
 {
+       unsigned int pin, mode;
+
+       for (; n; n--, b++) {
+               b->bus_num = bus_num;
+               if (b->chip_select >= 4)
+                       continue;
+               pin = (unsigned)b->controller_data;
+               if (!pin) {
+                       pin = pins[b->chip_select];
+                       b->controller_data = (void *)pin;
+               }
+               mode = AT32_GPIOF_OUTPUT;
+               if (!(b->mode & SPI_CS_HIGH))
+                       mode |= AT32_GPIOF_HIGH;
+               at32_select_gpio(pin, mode);
+       }
+}
+
+struct platform_device *__init
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+{
+       /*
+        * Manage the chipselects as GPIOs, normally using the same pins
+        * the SPI controller expects; but boards can use other pins.
+        */
+       static u8 __initdata spi0_pins[] =
+               { GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+                 GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+       static u8 __initdata spi1_pins[] =
+               { GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+                 GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
        struct platform_device *pdev;
 
        switch (id) {
@@ -761,14 +795,7 @@ struct platform_device *__init 
at32_add_device_spi(unsigned int id)
                select_peripheral(PA(0),  PERIPH_A, 0); /* MISO  */
                select_peripheral(PA(1),  PERIPH_A, 0); /* MOSI  */
                select_peripheral(PA(2),  PERIPH_A, 0); /* SCK   */
-
-               /* NPCS[2:0] */
-               at32_select_gpio(GPIO_PIN_PA(3),
-                                AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-               at32_select_gpio(GPIO_PIN_PA(4),
-                                AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-               at32_select_gpio(GPIO_PIN_PA(5),
-                                AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+               at32_spi_setup_slaves(0, b, n, spi0_pins);
                break;
 
        case 1:
@@ -776,20 +803,14 @@ struct platform_device *__init 
at32_add_device_spi(unsigned int id)
                select_peripheral(PB(0),  PERIPH_B, 0); /* MISO  */
                select_peripheral(PB(1),  PERIPH_B, 0); /* MOSI  */
                select_peripheral(PB(5),  PERIPH_B, 0); /* SCK   */
-
-               /* NPCS[2:0] */
-               at32_select_gpio(GPIO_PIN_PB(2),
-                                AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-               at32_select_gpio(GPIO_PIN_PB(3),
-                                AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
-               at32_select_gpio(GPIO_PIN_PB(4),
-                                AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+               at32_spi_setup_slaves(1, b, n, spi1_pins);
                break;
 
        default:
                return NULL;
        }
 
+       spi_register_board_info(b, n);
        platform_device_register(pdev);
        return pdev;
 }
diff --git a/include/asm-avr32/arch-at32ap/board.h 
b/include/asm-avr32/arch-at32ap/board.h
index b120ee0..1a7b07d 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -26,7 +26,9 @@ struct eth_platform_data {
 struct platform_device *
 at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
 
-struct platform_device *at32_add_device_spi(unsigned int id);
+struct spi_board_info;
+struct platform_device *
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
 
 struct lcdc_platform_data {
        unsigned long fbmem_start;
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to