Gitweb:
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=28735a7253a6c24364765e80a5428b4a151fccc2
Commit: 28735a7253a6c24364765e80a5428b4a151fccc2
Parent: a836f5856ae46ccb2464ea76031ea05ae967b832
Author: David Brownell <[EMAIL PROTECTED]>
AuthorDate: Fri Mar 16 13:38:14 2007 -0800
Committer: Linus Torvalds <[EMAIL PROTECTED]>
CommitDate: Fri Mar 16 19:25:04 2007 -0700
[PATCH] gpio_direction_output() needs an initial value
It's been pointed out that output GPIOs should have an initial value, to
avoid signal glitching ... among other things, it can be some time before
a driver is ready. This patch corrects that oversight, fixing
- documentation
- platforms supporting the GPIO interface
- users of that call (just one for now, others are pending)
There's only one user of this call for now since most platforms are still
using non-generic GPIO setup code, which in most cases already couples the
initial value with its "set output mode" request.
Note that most platforms are clear about the hardware letting the output
value be set before the pin direction is changed, but the s3c241x docs are
vague on that topic ... so those chips might not avoid the glitches.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Acked-by: Andrew Victor <[EMAIL PROTECTED]>
Acked-by: Milan Svoboda <[EMAIL PROTECTED]>
Acked-by: Haavard Skinnemoen <[EMAIL PROTECTED]>
Cc: Russell King <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>
---
Documentation/gpio.txt | 5 ++++-
arch/arm/mach-at91/gpio.c | 3 ++-
arch/arm/mach-sa1100/generic.c | 3 ++-
arch/avr32/mach-at32ap/pio.c | 4 +++-
drivers/spi/atmel_spi.c | 2 +-
include/asm-arm/arch-at91/gpio.h | 2 +-
include/asm-arm/arch-omap/gpio.h | 3 ++-
include/asm-arm/arch-pxa/gpio.h | 4 ++--
include/asm-arm/arch-s3c2410/gpio.h | 4 +++-
include/asm-arm/arch-sa1100/gpio.h | 2 +-
include/asm-avr32/arch-at32ap/gpio.h | 2 +-
11 files changed, 22 insertions(+), 12 deletions(-)
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 576ce46..989f113 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -105,12 +105,15 @@ setting up a platform_device using the GPIO, is mark its
direction:
/* set as input or output, returning 0 or negative errno */
int gpio_direction_input(unsigned gpio);
- int gpio_direction_output(unsigned gpio);
+ int gpio_direction_output(unsigned gpio, int value);
The return value is zero for success, else a negative errno. It should
be checked, since the get/set calls don't have error returns and since
misconfiguration is possible. (These calls could sleep.)
+For output GPIOs, the value provided becomes the initial output value.
+This helps avoid signal glitching during system startup.
+
Setting the direction can fail if the GPIO number is invalid, or when
that particular GPIO can't be used in that mode. It's generally a bad
idea to rely on boot firmware to have set the direction correctly, since
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 44211a0..ba4a1bb 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -215,13 +215,14 @@ int gpio_direction_input(unsigned pin)
}
EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned pin)
+int gpio_direction_output(unsigned pin, int value)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
return -EINVAL;
+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
__raw_writel(mask, pio + PIO_OER);
return 0;
}
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 192a5a2..edc349e 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -153,7 +153,7 @@ int gpio_direction_input(unsigned gpio)
EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned gpio)
+int gpio_direction_output(unsigned gpio, int value)
{
unsigned long flags;
@@ -161,6 +161,7 @@ int gpio_direction_output(unsigned gpio)
return -EINVAL;
local_irq_save(flags);
+ gpio_set_value(gpio, value);
GPDR |= GPIO_GPIO(gpio);
local_irq_restore(flags);
return 0;
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 9ba5654..1eb99b8 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -214,7 +214,7 @@ int gpio_direction_input(unsigned int gpio)
}
EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned int gpio)
+int gpio_direction_output(unsigned int gpio, int value)
{
struct pio_device *pio;
unsigned int pin;
@@ -223,6 +223,8 @@ int gpio_direction_output(unsigned int gpio)
if (!pio)
return -ENODEV;
+ gpio_set_value(gpio, value);
+
pin = gpio & 0x1f;
pio_writel(pio, OER, 1 << pin);
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 6fa260d..66e7bc9 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -425,7 +425,7 @@ static int atmel_spi_setup(struct spi_device *spi)
if (ret)
return ret;
spi->controller_state = (void *)npcs_pin;
- gpio_direction_output(npcs_pin);
+ gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
}
dev_dbg(&spi->dev,
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
index 98ad211..0a241e2 100644
--- a/include/asm-arm/arch-at91/gpio.h
+++ b/include/asm-arm/arch-at91/gpio.h
@@ -223,7 +223,7 @@ static inline void gpio_free(unsigned gpio)
}
extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
static inline int gpio_get_value(unsigned gpio)
{
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index 3762a6a..590917e 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -113,8 +113,9 @@ static inline int gpio_direction_input(unsigned gpio)
return __gpio_set_direction(gpio, 1);
}
-static inline int gpio_direction_output(unsigned gpio)
+static inline int gpio_direction_output(unsigned gpio, int value)
{
+ omap_set_gpio_dataout(gpio, value);
return __gpio_set_direction(gpio, 0);
}
diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h
index 3d348a3..aeba243 100644
--- a/include/asm-arm/arch-pxa/gpio.h
+++ b/include/asm-arm/arch-pxa/gpio.h
@@ -43,9 +43,9 @@ static inline int gpio_direction_input(unsigned gpio)
return pxa_gpio_mode(gpio | GPIO_IN);
}
-static inline int gpio_direction_output(unsigned gpio)
+static inline int gpio_direction_output(unsigned gpio, int value)
{
- return pxa_gpio_mode(gpio | GPIO_OUT);
+ return pxa_gpio_mode(gpio | GPIO_OUT | (value ? 0 : GPIO_DFLT_LOW));
}
static inline int __gpio_get_value(unsigned gpio)
diff --git a/include/asm-arm/arch-s3c2410/gpio.h
b/include/asm-arm/arch-s3c2410/gpio.h
index d47ae45..7583895 100644
--- a/include/asm-arm/arch-s3c2410/gpio.h
+++ b/include/asm-arm/arch-s3c2410/gpio.h
@@ -44,9 +44,11 @@ static inline int gpio_direction_input(unsigned gpio)
return 0;
}
-static inline int gpio_direction_output(unsigned gpio)
+static inline int gpio_direction_output(unsigned gpio, int value)
{
s3c2410_gpio_cfgpin(gpio, S3C2410_GPIO_OUTPUT);
+ /* REVISIT can we write the value first, to avoid glitching? */
+ s3c2410_gpio_setpin(gpio, value);
return 0;
}
diff --git a/include/asm-arm/arch-sa1100/gpio.h
b/include/asm-arm/arch-sa1100/gpio.h
index da7575b..e7a9d26 100644
--- a/include/asm-arm/arch-sa1100/gpio.h
+++ b/include/asm-arm/arch-sa1100/gpio.h
@@ -38,7 +38,7 @@ static inline void gpio_free(unsigned gpio)
}
extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
static inline int gpio_get_value(unsigned gpio)
diff --git a/include/asm-avr32/arch-at32ap/gpio.h
b/include/asm-avr32/arch-at32ap/gpio.h
index fcb756b..80a21aa 100644
--- a/include/asm-avr32/arch-at32ap/gpio.h
+++ b/include/asm-avr32/arch-at32ap/gpio.h
@@ -10,7 +10,7 @@ int __must_check gpio_request(unsigned int gpio, const char
*label);
void gpio_free(unsigned int gpio);
int gpio_direction_input(unsigned int gpio);
-int gpio_direction_output(unsigned int gpio);
+int gpio_direction_output(unsigned int gpio, int value);
int gpio_get_value(unsigned int gpio);
void gpio_set_value(unsigned int gpio, int value);
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
