Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e0aac5a289b1dacbc94bd9ae8c449bcdf9ab508c
Commit:     e0aac5a289b1dacbc94bd9ae8c449bcdf9ab508c
Parent:     de46c33745f5e2ad594c72f2cf5f490861b16ce1
Author:     Auke Kok <[EMAIL PROTECTED]>
AuthorDate: Tue Mar 6 08:57:21 2007 -0800
Committer:  Jeff Garzik <[EMAIL PROTECTED]>
CommitDate: Thu Apr 26 02:22:41 2007 -0400

    e1000: FIX: be ready for incoming irq at pci_request_irq
    
    DEBUG_SHIRQ code exposed that e1000 was not ready for incoming interrupts
    after having called pci_request_irq. This obviously requires us to finish
    our software setup which assigns the irq handler before we request the
    irq.
    
    Signed-off-by: Auke Kok <[EMAIL PROTECTED]>
    Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]>
---
 drivers/net/e1000/e1000_main.c |   66 +++++++++++++++++++++++++++-------------
 1 files changed, 45 insertions(+), 21 deletions(-)

diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b28a915..f777d37 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -522,14 +522,15 @@ e1000_release_manageability(struct e1000_adapter *adapter)
        }
 }
 
-int
-e1000_up(struct e1000_adapter *adapter)
+/**
+ * e1000_configure - configure the hardware for RX and TX
+ * @adapter = private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
 {
        struct net_device *netdev = adapter->netdev;
        int i;
 
-       /* hardware has been reset, we need to reload some things */
-
        e1000_set_multi(netdev);
 
        e1000_restore_vlan(adapter);
@@ -548,14 +549,20 @@ e1000_up(struct e1000_adapter *adapter)
        }
 
        adapter->tx_queue_len = netdev->tx_queue_len;
+}
+
+int e1000_up(struct e1000_adapter *adapter)
+{
+       /* hardware has been reset, we need to reload some things */
+       e1000_configure(adapter);
+
+       clear_bit(__E1000_DOWN, &adapter->flags);
 
 #ifdef CONFIG_E1000_NAPI
-       netif_poll_enable(netdev);
+       netif_poll_enable(adapter->netdev);
 #endif
        e1000_irq_enable(adapter);
 
-       clear_bit(__E1000_DOWN, &adapter->flags);
-
        /* fire a link change interrupt to start the watchdog */
        E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
        return 0;
@@ -640,15 +647,15 @@ e1000_down(struct e1000_adapter *adapter)
         * reschedule our watchdog timer */
        set_bit(__E1000_DOWN, &adapter->flags);
 
+#ifdef CONFIG_E1000_NAPI
+       netif_poll_disable(netdev);
+#endif
        e1000_irq_disable(adapter);
 
        del_timer_sync(&adapter->tx_fifo_stall_timer);
        del_timer_sync(&adapter->watchdog_timer);
        del_timer_sync(&adapter->phy_info_timer);
 
-#ifdef CONFIG_E1000_NAPI
-       netif_poll_disable(netdev);
-#endif
        netdev->tx_queue_len = adapter->tx_queue_len;
        adapter->link_speed = 0;
        adapter->link_duplex = 0;
@@ -1410,21 +1417,17 @@ e1000_open(struct net_device *netdev)
                return -EBUSY;
 
        /* allocate transmit descriptors */
-       if ((err = e1000_setup_all_tx_resources(adapter)))
+       err = e1000_setup_all_tx_resources(adapter);
+       if (err)
                goto err_setup_tx;
 
        /* allocate receive descriptors */
-       if ((err = e1000_setup_all_rx_resources(adapter)))
-               goto err_setup_rx;
-
-       err = e1000_request_irq(adapter);
+       err = e1000_setup_all_rx_resources(adapter);
        if (err)
-               goto err_req_irq;
+               goto err_setup_rx;
 
        e1000_power_up_phy(adapter);
 
-       if ((err = e1000_up(adapter)))
-               goto err_up;
        adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
        if ((adapter->hw.mng_cookie.status &
                          E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
@@ -1437,12 +1440,33 @@ e1000_open(struct net_device *netdev)
            e1000_check_mng_mode(&adapter->hw))
                e1000_get_hw_control(adapter);
 
+       /* before we allocate an interrupt, we must be ready to handle it.
+        * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+        * as soon as we call pci_request_irq, so we have to setup our
+        * clean_rx handler before we do so.  */
+       e1000_configure(adapter);
+
+       err = e1000_request_irq(adapter);
+       if (err)
+               goto err_req_irq;
+
+       /* From here on the code is the same as e1000_up() */
+       clear_bit(__E1000_DOWN, &adapter->flags);
+
+#ifdef CONFIG_E1000_NAPI
+       netif_poll_enable(netdev);
+#endif
+
+       e1000_irq_enable(adapter);
+
+       /* fire a link status change interrupt to start the watchdog */
+       E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
+
        return E1000_SUCCESS;
 
-err_up:
-       e1000_power_down_phy(adapter);
-       e1000_free_irq(adapter);
 err_req_irq:
+       e1000_release_hw_control(adapter);
+       e1000_power_down_phy(adapter);
        e1000_free_all_rx_resources(adapter);
 err_setup_rx:
        e1000_free_all_tx_resources(adapter);
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to