Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=eb4a2c7f03db06dda0370591c958fa5a62ff2ec3
Commit:     eb4a2c7f03db06dda0370591c958fa5a62ff2ec3
Parent:     5a5dbd18a7496ed403f6f54bb20c955c65482fa5
Author:     Alan Cox <[EMAIL PROTECTED]>
AuthorDate: Wed Apr 11 00:04:20 2007 +0100
Committer:  Jeff Garzik <[EMAIL PROTECTED]>
CommitDate: Sat Apr 28 14:16:01 2007 -0400

    pata: cable methods
    
    Versus upstream as requested
    
    Last of the trivial switches to cable_detect methods.
    
    Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
    Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]>
---
 drivers/ata/ata_generic.c  |   32 +--------------
 drivers/ata/ata_piix.c     |   55 +++++---------------------
 drivers/ata/pata_amd.c     |   94 ++++++++++++++++++++++----------------------
 drivers/ata/pata_cs5535.c  |   24 +++--------
 drivers/ata/pata_cypress.c |   14 +------
 drivers/ata/pata_hpt366.c  |    1 -
 6 files changed, 67 insertions(+), 153 deletions(-)

diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index d8e7988..92a491d 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -33,35 +33,6 @@
  */
 
 /**
- *     generic_pre_reset               -       probe begin
- *     @ap: ATA port
- *
- *     Set up cable type and use generic probe init
- */
-
-static int generic_pre_reset(struct ata_port *ap)
-{
-       ap->cbl = ATA_CBL_PATA80;
-       return ata_std_prereset(ap);
-}
-
-
-/**
- *     generic_error_handler - Probe specified port on PATA host controller
- *     @ap: Port to probe
- *     @classes:
- *
- *     LOCKING:
- *     None (inherited from caller).
- */
-
-
-static void generic_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, generic_pre_reset, ata_std_softreset, NULL, 
ata_std_postreset);
-}
-
-/**
  *     generic_set_mode        -       mode setting
  *     @ap: interface to set up
  *     @unused: returned device on error
@@ -144,8 +115,9 @@ static struct ata_port_operations generic_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = generic_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_unknown,
 
        .qc_prep        = ata_qc_prep,
        .qc_issue       = ata_qc_issue_prot,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a2c5756..55d306a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -93,7 +93,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME       "ata_piix"
-#define DRV_VERSION    "2.10ac1"
+#define DRV_VERSION    "2.11"
 
 enum {
        PIIX_IOCFG              = 0x54, /* IDE I/O configuration register */
@@ -155,11 +155,11 @@ struct piix_host_priv {
 static int piix_init_one (struct pci_dev *pdev,
                                    const struct pci_device_id *ent);
 static void piix_pata_error_handler(struct ata_port *ap);
-static void ich_pata_error_handler(struct ata_port *ap);
 static void piix_sata_error_handler(struct ata_port *ap);
 static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
 static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev);
+static int ich_pata_cable_detect(struct ata_port *ap);
 
 static unsigned int in_module_init = 1;
 
@@ -305,6 +305,7 @@ static const struct ata_port_operations piix_pata_ops = {
        .thaw                   = ata_bmdma_thaw,
        .error_handler          = piix_pata_error_handler,
        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
+       .cable_detect           = ata_cable_40wire,
 
        .irq_handler            = ata_interrupt,
        .irq_clear              = ata_bmdma_irq_clear,
@@ -336,8 +337,9 @@ static const struct ata_port_operations ich_pata_ops = {
 
        .freeze                 = ata_bmdma_freeze,
        .thaw                   = ata_bmdma_thaw,
-       .error_handler          = ich_pata_error_handler,
+       .error_handler          = piix_pata_error_handler,
        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
+       .cable_detect           = ich_pata_cable_detect,
 
        .irq_handler            = ata_interrupt,
        .irq_clear              = ata_bmdma_irq_clear,
@@ -586,7 +588,7 @@ static const struct ich_laptop ich_laptop[] = {
 };
 
 /**
- *     piix_pata_cbl_detect - Probe host controller cable detect info
+ *     ich_pata_cable_detect - Probe host controller cable detect info
  *     @ap: Port for which cable detect info is desired
  *
  *     Read 80c cable indicator from ATA PCI device's PCI config
@@ -596,23 +598,18 @@ static const struct ich_laptop ich_laptop[] = {
  *     None (inherited from caller).
  */
 
-static void ich_pata_cbl_detect(struct ata_port *ap)
+static int ich_pata_cable_detect(struct ata_port *ap)
 {
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
        const struct ich_laptop *lap = &ich_laptop[0];
        u8 tmp, mask;
 
-       /* no 80c support in host controller? */
-       if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0)
-               goto cbl40;
-
        /* Check for specials - Acer Aspire 5602WLMi */
        while (lap->device) {
                if (lap->device == pdev->device &&
                    lap->subvendor == pdev->subsystem_vendor &&
                    lap->subdevice == pdev->subsystem_device) {
-                       ap->cbl = ATA_CBL_PATA40_SHORT;
-                       return;
+                       return ATA_CBL_PATA40_SHORT;
                }
                lap++;
        }
@@ -621,20 +618,14 @@ static void ich_pata_cbl_detect(struct ata_port *ap)
        mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
        pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
        if ((tmp & mask) == 0)
-               goto cbl40;
-
-       ap->cbl = ATA_CBL_PATA80;
-       return;
-
-cbl40:
-       ap->cbl = ATA_CBL_PATA40;
+               return ATA_CBL_PATA40;
+       return ATA_CBL_PATA80;
 }
 
 /**
  *     piix_pata_prereset - prereset for PATA host controller
  *     @ap: Target port
  *
- *
  *     LOCKING:
  *     None (inherited from caller).
  */
@@ -644,8 +635,6 @@ static int piix_pata_prereset(struct ata_port *ap)
 
        if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
                return -ENOENT;
-
-       ap->cbl = ATA_CBL_PATA40;
        return ata_std_prereset(ap);
 }
 
@@ -656,30 +645,6 @@ static void piix_pata_error_handler(struct ata_port *ap)
 }
 
 
-/**
- *     ich_pata_prereset - prereset for PATA host controller
- *     @ap: Target port
- *
- *
- *     LOCKING:
- *     None (inherited from caller).
- */
-static int ich_pata_prereset(struct ata_port *ap)
-{
-       struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-       if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
-               return -ENOENT;
-       ich_pata_cbl_detect(ap);
-       return ata_std_prereset(ap);
-}
-
-static void ich_pata_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, ich_pata_prereset, ata_std_softreset, NULL,
-                          ata_std_postreset);
-}
-
 static void piix_sata_error_handler(struct ata_port *ap)
 {
        ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 1838176..5a77e4e 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.8"
+#define DRV_VERSION "0.3.8"
 
 /**
  *     timing_setup            -       shared timing computation and load
@@ -119,32 +119,25 @@ static void timing_setup(struct ata_port *ap, struct 
ata_device *adev, int offse
 }
 
 /**
- *     amd_probe_init          -       cable detection
+ *     amd_probe_init          -       perform reset handling
  *     @ap: ATA port
  *
- *     Perform cable detection. The BIOS stores this in PCI config
- *     space for us.
+ *     Reset sequence checking enable bits to see which ports are
+ *     active.
  */
 
 static int amd_pre_reset(struct ata_port *ap)
 {
-       static const u32 bitmask[2] = {0x03, 0x0C};
        static const struct pci_bits amd_enable_bits[] = {
                { 0x40, 1, 0x02, 0x02 },
                { 0x40, 1, 0x01, 0x01 }
        };
 
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-       u8 ata66;
 
        if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
                return -ENOENT;
 
-       pci_read_config_byte(pdev, 0x42, &ata66);
-       if (ata66 & bitmask[ap->port_no])
-               ap->cbl = ATA_CBL_PATA80;
-       else
-               ap->cbl = ATA_CBL_PATA40;
        return ata_std_prereset(ap);
 
 }
@@ -156,28 +149,16 @@ static void amd_error_handler(struct ata_port *ap)
                                      ata_std_postreset);
 }
 
-static int amd_early_pre_reset(struct ata_port *ap)
+static int amd_cable_detect(struct ata_port *ap)
 {
+       static const u32 bitmask[2] = {0x03, 0x0C};
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-       static struct pci_bits amd_enable_bits[] = {
-               { 0x40, 1, 0x02, 0x02 },
-               { 0x40, 1, 0x01, 0x01 }
-       };
-
-       if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
-               return -ENOENT;
-
-       /* No host side cable detection */
-       ap->cbl = ATA_CBL_PATA80;
-       return ata_std_prereset(ap);
-
-}
+       u8 ata66;
 
-static void amd_early_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, amd_early_pre_reset,
-                              ata_std_softreset, NULL,
-                              ata_std_postreset);
+       pci_read_config_byte(pdev, 0x42, &ata66);
+       if (ata66 & bitmask[ap->port_no])
+               return ATA_CBL_PATA80;
+       return ATA_CBL_PATA40;
 }
 
 /**
@@ -247,31 +228,16 @@ static void amd133_set_dmamode(struct ata_port *ap, 
struct ata_device *adev)
  */
 
 static int nv_pre_reset(struct ata_port *ap) {
-       static const u8 bitmask[2] = {0x03, 0x0C};
        static const struct pci_bits nv_enable_bits[] = {
                { 0x50, 1, 0x02, 0x02 },
                { 0x50, 1, 0x01, 0x01 }
        };
 
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-       u8 ata66;
-       u16 udma;
 
        if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
                return -ENOENT;
 
-       pci_read_config_byte(pdev, 0x52, &ata66);
-       if (ata66 & bitmask[ap->port_no])
-               ap->cbl = ATA_CBL_PATA80;
-       else
-               ap->cbl = ATA_CBL_PATA40;
-
-       /* We now have to double check because the Nvidia boxes BIOS
-          doesn't always set the cable bits but does set mode bits */
-
-       pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
-       if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
-               ap->cbl = ATA_CBL_PATA80;
        return ata_std_prereset(ap);
 }
 
@@ -281,6 +247,29 @@ static void nv_error_handler(struct ata_port *ap)
                               ata_std_softreset, NULL,
                               ata_std_postreset);
 }
+
+static int nv_cable_detect(struct ata_port *ap)
+{
+       static const u8 bitmask[2] = {0x03, 0x0C};
+       struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+       u8 ata66;
+       u16 udma;
+       int cbl;
+
+       pci_read_config_byte(pdev, 0x52, &ata66);
+       if (ata66 & bitmask[ap->port_no])
+               cbl = ATA_CBL_PATA80;
+       else
+               cbl = ATA_CBL_PATA40;
+
+       /* We now have to double check because the Nvidia boxes BIOS
+          doesn't always set the cable bits but does set mode bits */
+       pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
+       if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
+               cbl = ATA_CBL_PATA80;
+       return cbl;
+}
+
 /**
  *     nv100_set_piomode       -       set initial PIO mode data
  *     @ap: ATA interface
@@ -353,8 +342,9 @@ static struct ata_port_operations amd33_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = amd_early_error_handler,
+       .error_handler  = amd_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_40wire,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -387,8 +377,9 @@ static struct ata_port_operations amd66_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = amd_early_error_handler,
+       .error_handler  = amd_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_unknown,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -423,6 +414,7 @@ static struct ata_port_operations amd100_port_ops = {
        .thaw           = ata_bmdma_thaw,
        .error_handler  = amd_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_unknown,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -457,6 +449,7 @@ static struct ata_port_operations amd133_port_ops = {
        .thaw           = ata_bmdma_thaw,
        .error_handler  = amd_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = amd_cable_detect,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -491,6 +484,7 @@ static struct ata_port_operations nv100_port_ops = {
        .thaw           = ata_bmdma_thaw,
        .error_handler  = nv_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = nv_cable_detect,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -525,6 +519,7 @@ static struct ata_port_operations nv133_port_ops = {
        .thaw           = ata_bmdma_thaw,
        .error_handler  = nv_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = nv_cable_detect,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
@@ -644,6 +639,11 @@ static int amd_init_one(struct pci_dev *pdev, const struct 
pci_device_id *id)
        if (type == 1 && rev > 0x7)
                type = 2;
 
+#if defined(CONFIG_ATA_ACPI)
+       /* Prefer the ACPI driver for Nvidia hardware */
+       if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && ata_pata_acpi_present(pdev))
+               return -ENODEV;
+#endif
        /* Check for AMD7411 */
        if (type == 3)
                /* FIFO is broken */
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 1572e5c..08cccc9 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -70,36 +70,23 @@
 #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )
 
 /**
- *     cs5535_pre_reset        -       detect cable type
+ *     cs5535_cable_detect     -       detect cable type
  *     @ap: Port to detect on
  *
  *     Perform cable detection for ATA66 capable cable. Return a libata
  *     cable type.
  */
 
-static int cs5535_pre_reset(struct ata_port *ap)
+static int cs5535_cable_detect(struct ata_port *ap)
 {
        u8 cable;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
        pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
        if (cable & 1)
-               ap->cbl = ATA_CBL_PATA80;
+               return ATA_CBL_PATA80;
        else
-               ap->cbl = ATA_CBL_PATA40;
-       return ata_std_prereset(ap);
-}
-
-/**
- *     cs5535_error_handler            -       reset/probe
- *     @ap: Port to reset
- *
- *     Reset and configure a port
- */
-
-static void cs5535_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, 
ata_std_postreset);
+               return ATA_CBL_PATA40;
 }
 
 /**
@@ -205,8 +192,9 @@ static struct ata_port_operations cs5535_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = cs5535_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = cs5535_cable_detect,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index f69dde5..6ec049c 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -41,17 +41,6 @@ enum {
        CY82_INDEX_TIMEOUT      = 0x32
 };
 
-static int cy82c693_pre_reset(struct ata_port *ap)
-{
-       ap->cbl = ATA_CBL_PATA40;
-       return ata_std_prereset(ap);
-}
-
-static void cy82c693_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, 
ata_std_postreset);
-}
-
 /**
  *     cy82c693_set_piomode    -       set initial PIO mode data
  *     @ap: ATA interface
@@ -156,8 +145,9 @@ static struct ata_port_operations cy82c693_port_ops = {
 
        .freeze         = ata_bmdma_freeze,
        .thaw           = ata_bmdma_thaw,
-       .error_handler  = cy82c693_error_handler,
+       .error_handler  = ata_bmdma_error_handler,
        .post_internal_cmd = ata_bmdma_post_internal_cmd,
+       .cable_detect   = ata_cable_40wire,
 
        .bmdma_setup    = ata_bmdma_setup,
        .bmdma_start    = ata_bmdma_start,
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index c3e5ea3..93cfa6d 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -169,7 +169,6 @@ static int hpt_dma_blacklisted(const struct ata_device 
*dev, char *modestr, cons
 
 /**
  *     hpt366_filter   -       mode selection filter
- *     @ap: ATA interface
  *     @adev: ATA device
  *
  *     Block UDMA on devices that cause trouble with this controller.
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to