Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=27345bb684140f5f306963e0d6e25a60c7857dfe
Commit:     27345bb684140f5f306963e0d6e25a60c7857dfe
Parent:     948cd43fed7c7d919fa30e0609b2b5852c4503ef
Author:     Jesse Brandeburg <[EMAIL PROTECTED]>
AuthorDate: Thu Apr 26 09:43:20 2007 -0700
Committer:  Jeff Garzik <[EMAIL PROTECTED]>
CommitDate: Sat Apr 28 11:01:07 2007 -0400

    e100: Optionally use I/O mode only to access register space
    
    It appears that some systems still like e100 better if it uses
    I/O access mode.  Setting the new parameter use_io=1 will cause
    all driver instances to use io mapping to access the register
    space on the e100 device.
    
    Signed-off-by: Jesse Brandeburg <[EMAIL PROTECTED]>
    Signed-off-by: Auke Kok <[EMAIL PROTECTED]>
    Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]>
---
 drivers/net/e100.c |   72 ++++++++++++++++++++++++++++-----------------------
 1 files changed, 39 insertions(+), 33 deletions(-)

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 135617c..6169663 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -159,7 +159,7 @@
 
 #define DRV_NAME               "e100"
 #define DRV_EXT                        "-NAPI"
-#define DRV_VERSION            "3.5.17-k2"DRV_EXT
+#define DRV_VERSION            "3.5.17-k4"DRV_EXT
 #define DRV_DESCRIPTION                "Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT          "Copyright(c) 1999-2006 Intel Corporation"
 #define PFX                    DRV_NAME ": "
@@ -174,10 +174,13 @@ MODULE_VERSION(DRV_VERSION);
 
 static int debug = 3;
 static int eeprom_bad_csum_allow = 0;
+static int use_io = 0;
 module_param(debug, int, 0);
 module_param(eeprom_bad_csum_allow, int, 0);
+module_param(use_io, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
+MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
 #define DPRINTK(nlevel, klevel, fmt, args...) \
        (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
        printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
@@ -584,7 +587,7 @@ static inline void e100_write_flush(struct nic *nic)
 {
        /* Flush previous PCI writes through intermediate bridges
         * by doing a benign read */
-       (void)readb(&nic->csr->scb.status);
+       (void)ioread8(&nic->csr->scb.status);
 }
 
 static void e100_enable_irq(struct nic *nic)
@@ -592,7 +595,7 @@ static void e100_enable_irq(struct nic *nic)
        unsigned long flags;
 
        spin_lock_irqsave(&nic->cmd_lock, flags);
-       writeb(irq_mask_none, &nic->csr->scb.cmd_hi);
+       iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
        e100_write_flush(nic);
        spin_unlock_irqrestore(&nic->cmd_lock, flags);
 }
@@ -602,7 +605,7 @@ static void e100_disable_irq(struct nic *nic)
        unsigned long flags;
 
        spin_lock_irqsave(&nic->cmd_lock, flags);
-       writeb(irq_mask_all, &nic->csr->scb.cmd_hi);
+       iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
        e100_write_flush(nic);
        spin_unlock_irqrestore(&nic->cmd_lock, flags);
 }
@@ -611,11 +614,11 @@ static void e100_hw_reset(struct nic *nic)
 {
        /* Put CU and RU into idle with a selective reset to get
         * device off of PCI bus */
-       writel(selective_reset, &nic->csr->port);
+       iowrite32(selective_reset, &nic->csr->port);
        e100_write_flush(nic); udelay(20);
 
        /* Now fully reset device */
-       writel(software_reset, &nic->csr->port);
+       iowrite32(software_reset, &nic->csr->port);
        e100_write_flush(nic); udelay(20);
 
        /* Mask off our interrupt line - it's unmasked after reset */
@@ -632,7 +635,7 @@ static int e100_self_test(struct nic *nic)
        nic->mem->selftest.signature = 0;
        nic->mem->selftest.result = 0xFFFFFFFF;
 
-       writel(selftest | dma_addr, &nic->csr->port);
+       iowrite32(selftest | dma_addr, &nic->csr->port);
        e100_write_flush(nic);
        /* Wait 10 msec for self-test to complete */
        msleep(10);
@@ -670,23 +673,23 @@ static void e100_eeprom_write(struct nic *nic, u16 
addr_len, u16 addr, u16 data)
        for(j = 0; j < 3; j++) {
 
                /* Chip select */
-               writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+               iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
                e100_write_flush(nic); udelay(4);
 
                for(i = 31; i >= 0; i--) {
                        ctrl = (cmd_addr_data[j] & (1 << i)) ?
                                eecs | eedi : eecs;
-                       writeb(ctrl, &nic->csr->eeprom_ctrl_lo);
+                       iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
                        e100_write_flush(nic); udelay(4);
 
-                       writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+                       iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
                        e100_write_flush(nic); udelay(4);
                }
                /* Wait 10 msec for cmd to complete */
                msleep(10);
 
                /* Chip deselect */
-               writeb(0, &nic->csr->eeprom_ctrl_lo);
+               iowrite8(0, &nic->csr->eeprom_ctrl_lo);
                e100_write_flush(nic); udelay(4);
        }
 };
@@ -702,21 +705,21 @@ static u16 e100_eeprom_read(struct nic *nic, u16 
*addr_len, u16 addr)
        cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
 
        /* Chip select */
-       writeb(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+       iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
        e100_write_flush(nic); udelay(4);
 
        /* Bit-bang to read word from eeprom */
        for(i = 31; i >= 0; i--) {
                ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
-               writeb(ctrl, &nic->csr->eeprom_ctrl_lo);
+               iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
                e100_write_flush(nic); udelay(4);
 
-               writeb(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+               iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
                e100_write_flush(nic); udelay(4);
 
                /* Eeprom drives a dummy zero to EEDO after receiving
                 * complete address.  Use this to adjust addr_len. */
-               ctrl = readb(&nic->csr->eeprom_ctrl_lo);
+               ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
                if(!(ctrl & eedo) && i > 16) {
                        *addr_len -= (i - 16);
                        i = 17;
@@ -726,7 +729,7 @@ static u16 e100_eeprom_read(struct nic *nic, u16 *addr_len, 
u16 addr)
        }
 
        /* Chip deselect */
-       writeb(0, &nic->csr->eeprom_ctrl_lo);
+       iowrite8(0, &nic->csr->eeprom_ctrl_lo);
        e100_write_flush(nic); udelay(4);
 
        return le16_to_cpu(data);
@@ -797,7 +800,7 @@ static int e100_exec_cmd(struct nic *nic, u8 cmd, 
dma_addr_t dma_addr)
 
        /* Previous command is accepted when SCB clears */
        for(i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
-               if(likely(!readb(&nic->csr->scb.cmd_lo)))
+               if(likely(!ioread8(&nic->csr->scb.cmd_lo)))
                        break;
                cpu_relax();
                if(unlikely(i > E100_WAIT_SCB_FAST))
@@ -809,8 +812,8 @@ static int e100_exec_cmd(struct nic *nic, u8 cmd, 
dma_addr_t dma_addr)
        }
 
        if(unlikely(cmd != cuc_resume))
-               writel(dma_addr, &nic->csr->scb.gen_ptr);
-       writeb(cmd, &nic->csr->scb.cmd_lo);
+               iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
+       iowrite8(cmd, &nic->csr->scb.cmd_lo);
 
 err_unlock:
        spin_unlock_irqrestore(&nic->cmd_lock, flags);
@@ -888,7 +891,7 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, 
u32 reg, u16 data)
         */
        spin_lock_irqsave(&nic->mdio_lock, flags);
        for (i = 100; i; --i) {
-               if (readl(&nic->csr->mdi_ctrl) & mdi_ready)
+               if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
                        break;
                udelay(20);
        }
@@ -898,11 +901,11 @@ static u16 mdio_ctrl(struct nic *nic, u32 addr, u32 dir, 
u32 reg, u16 data)
                spin_unlock_irqrestore(&nic->mdio_lock, flags);
                return 0;               /* No way to indicate timeout error */
        }
-       writel((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
+       iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
 
        for (i = 0; i < 100; i++) {
                udelay(20);
-               if ((data_out = readl(&nic->csr->mdi_ctrl)) & mdi_ready)
+               if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
                        break;
        }
        spin_unlock_irqrestore(&nic->mdio_lock, flags);
@@ -1311,7 +1314,7 @@ static inline int e100_exec_cb_wait(struct nic *nic, 
struct sk_buff *skb,
        }
 
        /* ack any interupts, something could have been set */
-       writeb(~0, &nic->csr->scb.stat_ack);
+       iowrite8(~0, &nic->csr->scb.stat_ack);
 
        /* if the command failed, or is not OK, notify and return */
        if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
@@ -1573,7 +1576,7 @@ static void e100_watchdog(unsigned long data)
         * accidentally, due to hardware that shares a register between the
         * interrupt mask bit and the SW Interrupt generation bit */
        spin_lock_irq(&nic->cmd_lock);
-       writeb(readb(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
+       iowrite8(ioread8(&nic->csr->scb.cmd_hi) | 
irq_sw_gen,&nic->csr->scb.cmd_hi);
        e100_write_flush(nic);
        spin_unlock_irq(&nic->cmd_lock);
 
@@ -1902,7 +1905,7 @@ static irqreturn_t e100_intr(int irq, void *dev_id)
 {
        struct net_device *netdev = dev_id;
        struct nic *nic = netdev_priv(netdev);
-       u8 stat_ack = readb(&nic->csr->scb.stat_ack);
+       u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
 
        DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
 
@@ -1911,7 +1914,7 @@ static irqreturn_t e100_intr(int irq, void *dev_id)
                return IRQ_NONE;
 
        /* Ack interrupt(s) */
-       writeb(stat_ack, &nic->csr->scb.stat_ack);
+       iowrite8(stat_ack, &nic->csr->scb.stat_ack);
 
        if(likely(netif_rx_schedule_prep(netdev))) {
                e100_disable_irq(nic);
@@ -2053,7 +2056,7 @@ static void e100_tx_timeout_task(struct work_struct *work)
        struct net_device *netdev = nic->netdev;
 
        DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
-               readb(&nic->csr->scb.status));
+               ioread8(&nic->csr->scb.status));
        e100_down(netdev_priv(netdev));
        e100_up(netdev_priv(netdev));
 }
@@ -2176,9 +2179,9 @@ static void e100_get_regs(struct net_device *netdev,
        int i;
 
        regs->version = (1 << 24) | nic->rev_id;
-       buff[0] = readb(&nic->csr->scb.cmd_hi) << 24 |
-               readb(&nic->csr->scb.cmd_lo) << 16 |
-               readw(&nic->csr->scb.status);
+       buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
+               ioread8(&nic->csr->scb.cmd_lo) << 16 |
+               ioread16(&nic->csr->scb.status);
        for(i = E100_PHY_REGS; i >= 0; i--)
                buff[1 + E100_PHY_REGS - i] =
                        mdio_read(netdev, nic->mii.phy_id, i);
@@ -2550,7 +2553,10 @@ static int __devinit e100_probe(struct pci_dev *pdev,
        SET_MODULE_OWNER(netdev);
        SET_NETDEV_DEV(netdev, &pdev->dev);
 
-       nic->csr = ioremap(pci_resource_start(pdev, 0), sizeof(struct csr));
+       if (use_io)
+               DPRINTK(PROBE, INFO, "using i/o access mode\n");
+
+       nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
        if(!nic->csr) {
                DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
                err = -ENOMEM;
@@ -2627,7 +2633,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 
        DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, "
                "MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n",
-               (unsigned long long)pci_resource_start(pdev, 0), pdev->irq,
+               (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), 
pdev->irq,
                netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
                netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
 
@@ -2636,7 +2642,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 err_out_free:
        e100_free(nic);
 err_out_iounmap:
-       iounmap(nic->csr);
+       pci_iounmap(pdev, nic->csr);
 err_out_free_res:
        pci_release_regions(pdev);
 err_out_disable_pdev:
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to