Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=9101be532a3c60c7e8773868395e3b75259d84c3
Commit:     9101be532a3c60c7e8773868395e3b75259d84c3
Parent:     07844252ffd81ec192a62014bada1016c9703765
Author:     Mike Frysinger <[EMAIL PROTECTED]>
AuthorDate: Wed Apr 18 16:18:13 2007 -0400
Committer:  Dave Jones <[EMAIL PROTECTED]>
CommitDate: Thu Apr 26 14:32:03 2007 -0400

    [CPUFREQ] cleanup kconfig options
    
    Adds proper lines to help output of kconfig so people can find the module 
names.
    Also fixed some broken leading spaces versus tabs.
    
    Signed-off-by: Mike Frysinger <[EMAIL PROTECTED]>
    Signed-off-by: Dave Jones <[EMAIL PROTECTED]>
---
 arch/x86_64/kernel/cpufreq/Kconfig |   19 +++++++++--
 drivers/cpufreq/Kconfig            |   61 +++++++++++++++++++++++++----------
 2 files changed, 58 insertions(+), 22 deletions(-)

diff --git a/arch/x86_64/kernel/cpufreq/Kconfig 
b/arch/x86_64/kernel/cpufreq/Kconfig
index 40acb67..c0749d2 100644
--- a/arch/x86_64/kernel/cpufreq/Kconfig
+++ b/arch/x86_64/kernel/cpufreq/Kconfig
@@ -16,6 +16,9 @@ config X86_POWERNOW_K8
        help
          This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 
processors.
 
+         To compile this driver as a module, choose M here: the
+         module will be called powernow-k8.
+
          For details, take a look at <file:Documentation/cpu-freq/>. 
 
          If in doubt, say N.
@@ -38,6 +41,9 @@ config X86_SPEEDSTEP_CENTRINO
          mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
          or 64bit enabled Intel Xeons.
 
+         To compile this driver as a module, choose M here: the
+         module will be called speedstep-centrino.
+
          For details, take a look at <file:Documentation/cpu-freq/>.
 
          If in doubt, say N.
@@ -55,6 +61,9 @@ config X86_ACPI_CPUFREQ
          Processor Performance States.
          This driver also supports Intel Enhanced Speedstep.
 
+         To compile this driver as a module, choose M here: the
+         module will be called acpi-cpufreq.
+
          For details, take a look at <file:Documentation/cpu-freq/>.
 
          If in doubt, say N.
@@ -62,7 +71,7 @@ config X86_ACPI_CPUFREQ
 comment "shared options"
 
 config X86_ACPI_CPUFREQ_PROC_INTF
-        bool "/proc/acpi/processor/../performance interface (deprecated)"
+       bool "/proc/acpi/processor/../performance interface (deprecated)"
        depends on PROC_FS
        depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || 
X86_POWERNOW_K8_ACPI
        help
@@ -86,16 +95,18 @@ config X86_P4_CLOCKMOD
          slowdowns and noticeable latencies.  Normally Speedstep should be used
          instead.
 
+         To compile this driver as a module, choose M here: the
+         module will be called p4-clockmod.
+
          For details, take a look at <file:Documentation/cpu-freq/>.
 
          Unless you are absolutely sure say N.
 
 
 config X86_SPEEDSTEP_LIB
-        tristate
-        default X86_P4_CLOCKMOD
+       tristate
+       default X86_P4_CLOCKMOD
 
 endif
 
 endmenu
-
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index d155e81..993fa7b 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -9,6 +9,9 @@ config CPU_FREQ
          clock speed, you need to either enable a dynamic cpufreq governor
          (see below) after boot, or use a userspace tool.
 
+         To compile this driver as a module, choose M here: the
+         module will be called cpufreq.
+
          For details, take a look at <file:Documentation/cpu-freq>.
 
          If in doubt, say N.
@@ -16,7 +19,7 @@ config CPU_FREQ
 if CPU_FREQ
 
 config CPU_FREQ_TABLE
-       tristate
+       tristate
 
 config CPU_FREQ_DEBUG
        bool "Enable CPUfreq debugging"
@@ -32,19 +35,26 @@ config CPU_FREQ_DEBUG
               4 to activate CPUfreq governor debugging
 
 config CPU_FREQ_STAT
-       tristate "CPU frequency translation statistics"
-       select CPU_FREQ_TABLE
-       default y
-       help
-         This driver exports CPU frequency statistics information through sysfs
-         file system
+       tristate "CPU frequency translation statistics"
+       select CPU_FREQ_TABLE
+       default y
+       help
+         This driver exports CPU frequency statistics information through sysfs
+         file system.
+
+         To compile this driver as a module, choose M here: the
+         module will be called cpufreq_stats.
+
+         If in doubt, say N.
 
 config CPU_FREQ_STAT_DETAILS
-       bool "CPU frequency translation statistics details"
-       depends on CPU_FREQ_STAT
-       help
-         This will show detail CPU frequency translation table in sysfs file
-         system
+       bool "CPU frequency translation statistics details"
+       depends on CPU_FREQ_STAT
+       help
+         This will show detail CPU frequency translation table in sysfs file
+         system.
+
+         If in doubt, say N.
 
 # Note that it is not currently possible to set the other governors (such as 
ondemand)
 # as the default, since if they fail to initialise, cpufreq will be
@@ -78,29 +88,38 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE
 endchoice
 
 config CPU_FREQ_GOV_PERFORMANCE
-       tristate "'performance' governor"
-       help
+       tristate "'performance' governor"
+       help
          This cpufreq governor sets the frequency statically to the
          highest available CPU frequency.
 
+         To compile this driver as a module, choose M here: the
+         module will be called cpufreq_performance.
+
          If in doubt, say Y.
 
 config CPU_FREQ_GOV_POWERSAVE
-       tristate "'powersave' governor"
-       help
+       tristate "'powersave' governor"
+       help
          This cpufreq governor sets the frequency statically to the
          lowest available CPU frequency.
 
+         To compile this driver as a module, choose M here: the
+         module will be called cpufreq_powersave.
+
          If in doubt, say Y.
 
 config CPU_FREQ_GOV_USERSPACE
-       tristate "'userspace' governor for userspace frequency scaling"
-       help
+       tristate "'userspace' governor for userspace frequency scaling"
+       help
          Enable this cpufreq governor when you either want to set the
          CPU frequency manually or when an userspace program shall
          be able to set the CPU dynamically, like on LART 
          <http://www.lartmaker.nl/>.
 
+         To compile this driver as a module, choose M here: the
+         module will be called cpufreq_userspace.
+
          For details, take a look at <file:Documentation/cpu-freq/>.
 
          If in doubt, say Y.
@@ -116,6 +135,9 @@ config CPU_FREQ_GOV_ONDEMAND
          do fast frequency switching (i.e, very low latency frequency
          transitions). 
 
+         To compile this driver as a module, choose M here: the
+         module will be called cpufreq_ondemand.
+
          For details, take a look at linux/Documentation/cpu-freq.
 
          If in doubt, say N.
@@ -136,6 +158,9 @@ config CPU_FREQ_GOV_CONSERVATIVE
          step-by-step latency issues between the minimum and maximum frequency
          transitions in the CPU) you will probably want to use this governor.
 
+         To compile this driver as a module, choose M here: the
+         module will be called cpufreq_conservative.
+
          For details, take a look at linux/Documentation/cpu-freq.
 
          If in doubt, say N.
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to