Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=a23c58a3ac4090a41e63ae5b69af87b409abe019
Commit:     a23c58a3ac4090a41e63ae5b69af87b409abe019
Parent:     90a42210f275e1f828eb6c08bf8252c2d6a774e0
Author:     Luis Carlos Cobo Rus <[EMAIL PROTECTED]>
AuthorDate: Fri May 25 23:04:13 2007 -0400
Committer:  John W. Linville <[EMAIL PROTECTED]>
CommitDate: Mon Jun 11 14:28:44 2007 -0400

    [PATCH] libertas: updated readme file
    
    Fix some wording and blinding table command options, clarify argument list 
for
    fwt_add and fwt_list, simplify fwt_list_route
    
    Signed-off-by: Luis Carlos Cobo Rus <[EMAIL PROTECTED]>
    Signed-off-by: John W. Linville <[EMAIL PROTECTED]>
---
 drivers/net/wireless/libertas/README |   50 +++++++++++++---------------------
 1 files changed, 19 insertions(+), 31 deletions(-)

diff --git a/drivers/net/wireless/libertas/README 
b/drivers/net/wireless/libertas/README
index 3785772..0ba74a2 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -47,15 +47,19 @@ Version 5 Command:
        iwpriv ethX ledgpio <n>
 
 BT Commands:
-       The blinding table (BT) contains a list of mac addresses that should be
-       ignored by the firmware.  It is primarily used for debugging and
-       testing networks.  It can be edited and inspected with the following
-       commands:
+       The blinding table (BT) contains a list of mac addresses that will be,
+       by default, ignored by the firmware. It is also possible to invert this
+       behavior so that we will ignore all traffic except for the portion
+       coming from mac addresess in the list. It is primarily used for
+       debugging and testing networks.  It can be edited and inspected with
+       the following commands:
 
        iwpriv ethX bt_reset
        iwpriv ethX bt_add <mac_address>
        iwpriv ethX bt_del <mac_address>
        iwpriv ethX bt_list <id>
+       iwpriv ethX bt_get_invert <n>
+       iwpriv ethX bt_set_invert <n>
 
 FWT Commands:
        The forwarding table (FWT) is a feature used to manage mesh network
@@ -135,7 +139,7 @@ fwt_add
        This command is used to insert an entry into the FWT table. The list of
        parameters must follow the following structure:
 
-       iwpriv ethX fwt_add da ra [metric dir ssn dsn hopcount ttl expiration 
sleepmode snr]
+       iwpriv ethX fwt_add da ra [metric dir rate ssn dsn hopcount ttl 
expiration sleepmode snr]
 
        The parameters between brackets are optional, but they must appear in
        the order specified.  For example, if you want to specify the metric,
@@ -150,6 +154,9 @@ fwt_add
                                   preferred, default is 0)
                dir             -- direction (1 for direct, 0 for reverse,
                                   default is 1)
+               rate            -- data rate used for transmission to the RA,
+                                  as specified for the rateadapt command,
+                                  default is 3 (11Mbps)
                ssn             -- Source Sequence Number (time at the RA for
                                   reverse routes.  Default is 0)
                dsn             -- Destination Sequence Number (time at the DA
@@ -207,13 +214,17 @@ fwt_list
 
        The output is a string of the following form:
 
-               da ra metric dir ssn dsn hopcount ttl expiration sleepmode snr
+               da ra valid metric dir rate ssn dsn hopcount ttl expiration
+               sleepmode snr precursor
 
        where the different fields are:-
                da              -- DA MAC address (in the form 
"00:11:22:33:44:55")
                ra              -- RA MAC address (in the form 
"00:11:22:33:44:55")
+               valid           -- whether the route is valid (0 if not valid)
                metric          -- route metric (cost: smaller-metric routes 
are preferred)
                dir             -- direction (1 for direct, 0 for reverse)
+               rate            -- data rate used for transmission to the RA,
+                                  as specified for the rateadapt command
                ssn             -- Source Sequence Number (time at the RA for 
reverse routes)
                dsn             -- Destination Sequence Number (time at the DA 
for direct routes)
                hopcount        -- hop count (currently unused)
@@ -221,33 +232,10 @@ fwt_list
                expiration      -- entry expiration (in ticks, where a tick is 
1024us, or ~ 1ms. Use 0 for an indefinite entry)
                sleepmode       -- RA's sleep mode (currently unused)
                snr             -- SNR in the link to RA (currently unused)
+               precursor       -- predecessor in direct routes
 
 fwt_list_route
-       This command is used to list a route from the FWT table. The only
-       parameter is the route ID. If you want to list all the routes in a
-       table, start with rid=0, and keep incrementing rid until you get a
-       "(null)" string. This function is similar to fwt_list. The only
-       difference is the output format.  Also note that this command is meant
-       for debugging.  It is expected that users will use fwt_lookup and
-       fwt_list.  One important reason for this is that the route id may change
-       as the route table is altered.
-
-               iwpriv ethX fwt_list_route rid
-
-       The output is a string of the following form:
-
-               da metric dir nid ssn dsn hopcount ttl expiration
-
-       where the different fields are:-
-               da              -- DA MAC address (in the form 
"00:11:22:33:44:55")
-               metric          -- route metric (cost: smaller-metric routes 
are preferred)
-               dir             -- direction (1 for direct, 0 for reverse)
-               nid             -- Next-hop (neighbor) host ID (nid)
-               ssn             -- Source Sequence Number (time at the RA for 
reverse routes)
-               dsn             -- Destination Sequence Number (time at the DA 
for direct routes)
-               hopcount        -- hop count (currently unused)
-               ttl             -- TTL count (only used in reverse entries)
-               expiration      -- entry expiration (in ticks, where a tick is 
1024us, or ~ 1ms. Use 0 for an indefinite entry)
+       This command is equivalent to fwt_list.
 
 fwt_list_neigh
        This command is used to list a neighbor from the FWT table. The only
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to