Commit:     cf3a386c083c0cc4eb9f01a8818b9499ae56e73f
Parent:     2e32725c6ae8fa5345d9d095742e175ff4badd3b
Author:     Adrian Bunk <[EMAIL PROTECTED]>
AuthorDate: Tue Jul 17 04:05:16 2007 -0700
Committer:  Linus Torvalds <[EMAIL PROTECTED]>
CommitDate: Tue Jul 17 10:23:10 2007 -0700

    remove options depending on OSS_OBSOLETE
    This patch contains the scheduled removal of options depending on
    Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
    Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
    Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>
 sound/oss/Kconfig |   77 -----------------------------------------------------
 1 files changed, 0 insertions(+), 77 deletions(-)

diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 3144779..866d4de 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -5,35 +5,6 @@
 # Prompt user for primary drivers.
-       bool "Obsolete OSS drivers"
-       depends on SOUND_PRIME
-       help
-         This option enables support for obsolete OSS drivers that
-         are scheduled for removal in the near future.
-         Please contact Adrian Bunk <[EMAIL PROTECTED]> if you had to
-         say Y here because your hardware is not properly supported
-         by ALSA.
-         If unsure, say N.
-config SOUND_BT878
-       tristate "BT878 audio dma"
-       depends on SOUND_PRIME && PCI && OSS_OBSOLETE
-       ---help---
-         Audio DMA support for bt878 based grabber boards.  As you might have
-         already noticed, bt878 is listed with two functions in /proc/pci.
-         Function 0 does the video stuff (bt848 compatible), function 1 does
-         the same for audio data.  This is a driver for the audio part of
-         the chip.  If you say 'Y' here you get a oss-compatible dsp device
-         where you can record from.  If you want just watch TV you probably
-         don't need this driver as most TV cards handle sound with a short
-         cable from the TV card to your sound card's line-in.
-         To compile this driver as a module, choose M here: the module will
-         be called btaudio.
 config SOUND_BCM_CS4297A
        tristate "Crystal Sound CS4297a (for Swarm)"
        depends on SOUND_PRIME && SIBYTE_SWARM
@@ -44,13 +15,6 @@ config SOUND_BCM_CS4297A
          note that CONFIG_KGDB should not be enabled at the same
          time, since it also attempts to use this UART port.
-config SOUND_ICH
-       tristate "Intel ICH (i8xx) audio support"
-       depends on SOUND_PRIME && PCI && OSS_OBSOLETE
-       help
-         Support for integral audio in Intel's I/O Controller Hub (ICH)
-         chipset, as used on the 810/820/840 motherboards.
        tristate "SGI Visual Workstation Sound"
        depends on SOUND_PRIME && X86_VISWS
@@ -346,26 +310,6 @@ config MSND_FIFOSIZE
          and Pinnacle). Larger values reduce the chance of data overruns at
          the expense of overall latency. If unsure, use the default.
-       tristate "VIA 82C686 Audio Codec"
-       depends on SOUND_PRIME && PCI && OSS_OBSOLETE && VIRT_TO_BUS
-       help
-         Say Y here to include support for the audio codec found on VIA
-         82Cxxx-based chips. Typically these are built into a motherboard.
-         DO NOT select Sound Blaster or Adlib with this driver, unless
-         you have a Sound Blaster or Adlib card in addition to your VIA
-         audio chip.
-config MIDI_VIA82CXXX
-       bool "VIA 82C686 MIDI"
-       depends on SOUND_VIA82CXXX && ISA_DMA_API
-       help
-         Answer Y to use the MIDI interface of the Via686. You may need to
-         enable this in the BIOS before it will work. This is for connection
-         to external MIDI hardware, and is not required for software playback
-         of MIDI files.
 config SOUND_OSS
        tristate "OSS sound modules"
        depends on SOUND_PRIME && ISA_DMA_API && VIRT_TO_BUS
@@ -400,20 +344,6 @@ config SOUND_DMAP
          Say Y unless you have 16MB or more RAM or a PCI sound card.
-config SOUND_CS4232
-       tristate "Crystal CS4232 based (PnP) cards"
-       depends on SOUND_OSS && OSS_OBSOLETE
-       help
-         Say Y here if you have a card based on the Crystal CS4232 chip set,
-         which uses its own Plug and Play protocol.
-         If you compile the driver into the kernel, you have to add
-         "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
-         command line.
-         See <file:Documentation/sound/oss/CS4232> for more information on
-         configuring this card.
        tristate "Ensoniq SoundScape support"
        depends on SOUND_OSS
@@ -720,13 +650,6 @@ config SOUND_WAVEARTIST
          Say Y here to include support for the Rockwell WaveArtist sound
          system.  This driver is mainly for the NetWinder.
-       tristate "TV card (bt848) mixer support"
-       depends on SOUND_PRIME && I2C && VIDEO_V4L1 && OSS_OBSOLETE
-       help
-         Support for audio mixer facilities on the BT848 TV frame-grabber
-         card.
        tristate "XpressAudio Sound Blaster emulation"
        depends on SOUND_SB
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at

Reply via email to